10 best cutoff blades for 2019
Finding your suitable cutoff blades is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best cutoff blades including detail information and customer reviews. Let’s find out which is your favorite one.
Best cutoff blades
1. Makita 10 Pack - 4.5" Cut Off Wheels For Grinders - Aggressive Cutting For Metal & Stainless Steel/INOX - 4-1/2" x .045 x 7/8-Inch
Feature
10 MAKITA Premium 4-1/2" Type 1 Flat Cut Off Wheels for Metal & Stainless Steel (INOX) | 4-1/2-Inch x .045-Inch x 7/8-Inch | Optimized for Makita 4-1/2" Angle Grinders and compatible with All 4-1/2" Angle Grinders with 5/8" arborCUT 2-3X MORE than lower quality or excessively thin wheels due to this wheel's Carefully selected Grain Grit, Hard Bond Matrix & Wheel Thickness that provide the best balanced Cut Life, Cut Rate, Cut Precision, Power Demands & Heat Buildup in the industry, allowing you to cut longer, consistently precise with unmatched wheel integrity, moderate power demands and relatively low heat buildup
QUICKLY & Effortlessly Cut through All Metal, Steel and Stainless Steel parts including rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces over an extra-long life span due to Makita's High-performance aluminum oxide grain and proprietary hard bond matrix
AVOID WHEEL SHATTER & Injury with lower priced wheels by relying on Makita's proprietary strong Synthetic Resinoid Bond matrix that binds Premium White Aluminum Oxide with Phenol Resin, allowing for optimal grain wear which yields accurate cutting PERFORMANCE, PRECISION, LONGEVITY, STABILITY & INTEGRITY, cutting Longer, Faster and Reliably than other wheels that may shatter or prematurely wear
DESIGNED for hard and continuous use on Stainless Steel, these Makita wheels are Quality Assured, Contaminant-Free, containing less than 0.1% Iron, Sulfur or Chlorine, for rust & corrosion-free results for your Stainless Steel material
Description
Optimize your metal cutting work with these 10 Makita Premier 4-1/2" Cutting Wheels for Metal and Stainless Steel such as rebar, steel pipe, structural & galvanized steel, sheet metal, structural tubing, black steel, cable and small to medium diameter solid pieces. When cutting, consider applying the proper amount of pressure at a 90 degree angle to allow the cutting wheel to do the work. For best results, consider not pushing too hard on the wheel, which can cause the grinder to stall or kick back or give a less efficient cutting action, while also increasing the chances of slippage or loss of control of the tool, resulting in injury or damage. Applying light to moderate pressure and consistent movement will provide the most efficient cut and minimize heat build-up. Consider using light pressure and a consistent motion throughout the cut for the fastest cut-rate and prolonged wheel life. Excessive pressure through the cut causes increased friction and heat build-up, which can cause increased heat discoloration of the work piece and reduced wheel life. For demanding applications, higher amperage &/or torque angle grinders provide easier, long-lasting & efficient cuts.2. HHIP 2000-6035 1/8 x 11/16 x 5 Inch HSS Parallel Type Cut-Off Blade P3
Feature
Parallel Style P3; Width W (In) 1/8Height H (In) 11/16; Length (In) 5
M2 High speed steel A fine general purpose Ground tool bits show exceptional result on mild steel, alloys and tool steels. This tool bit makes a superior finishing tool
Parallel Style blades have continuous width of cutting edge throughout Length of blade.; HSS
Description
M2 High speed steel A fine general purpose Ground tool bits show exceptional result on mild steel, alloys and tool steels. This tool bit makes a superior finishing tool. Parallel style blades have continuous width of cutting edge throughout Length of blade. Used with Aloris, DorIAN & KDK type quick-change tool holders.3. 4-1/2" Cut-off Wheels for Metal, for Cutting All Ferrous Metals and Stainless Steel
Feature
For use with angle grindersFully reinforced with fiberglass mesh for added safety and controlled performance
Tough aluminum oxide abrasive is continuously
exposed during use to maintain an aggressive cutting edge
40 GRIT
Description
Diameter: 4-1/2" Grit: 40 Arbor: 7/8" Thickness: 1/16" Maximum speed: 13,200 RPM If you cut a lot of metal, then these cut-off wheels are sure to make the cut. The 10 aluminum oxide blades each have a 7/8" arbor and handle a maximum speed up to 13,200 RPM.4. Ram-Pro 4-1/2 Inch Metal Cut-Off Wheel Blades | Abrasive Arbor Grinder Disc Set Ideal for Cutting, Grooving, Sanding and Trimming Ferrous Metal & Steel (10 Pack).
Feature
Ram-Pro Value Pack of 10 Flat Fast Cutoff wheels and discs used when cutting or slicing through metal beams and stainless steel objects or pipes etc.SPECS: 4-1/2" x 1/16 Inch Thick Metal Wheel - Arbor Hole: 7/8" - Maximum Operation Speed: 14,000 RPM.
DESIGN & QUALITY: Aluminum Oxide perfectly round discs designed to use with 4 inch angle/side metal grinder's lot makes up for a fast burr free cut - industry Constructed Thin plate's makes slicing and cutting a breeze - Sturdy Materials make these wheels last a lifetime.
HOW TO USE: Just place the Heavy-Duty Disk onto your 4.5" Angle Grinder or any other High Speed Rotary Tool and make sure it has a tight snug fit in the Arbor hole, then start cutting or polishing your desired products (Remember: Always wear approved protective gear when using this tool).
USE FOR: For use on metal applications like steel, stainless, cast iron, sheet metal to sand, level & trim into screws, bolts, pipes, even horseshoes, aluminum gutters and steel walls or metal boxes.
Description
About Ram-Pro Sturdy 4-1/2" Cut-off Wheels for Angle grinders etc.
Ram-Pro premium metal cut-off discs provide superior performance and increased productivity. These flap discs cut through material faster than other cut-off discs and offer an extra-long cutting life. Fully reinforced for use in hand-held cut-off work.
These blades are designed to give you a straight and fast cut each time without shattering or fragmenting.
Tough aluminum oxide abrasive is continuously exposed during use to maintain an aggressive cutting edge.
Info:
4.5 inch Cut off wheels, also known as parting wheels, are self-sharpening wheels that are thin in width. They are often used in the construction industry for cutting reinforcement bars (rebar), protruding bolts or anything that needs quick removal or trimming.
You Get:
A Pack of 10 Cut-Off Discs
With this Value Pack of 10 Wheels, you can get through any stubborn project whether small or big, and you will never have to think twice before throwing away a used worn defective disk.
Benefits:
Straight Fast Clean cut.
Shatter/Fragment Proof.
Cut aluminum gutters easily.
Cut bolts and screws.
Make slots in rusted or stripped bolts & screws for removal with a screwdriver.
Will cut through Rebar's, Metal shafts and Hard Steel cases like a knife through butter.
Make fast, clean cuts in ferrous sheet metals, including iron and through a bunch of stainless steel studs with these abrasive cut-off wheels.
Remember:
Always use protective gear and approved safety guard - Do not over speed the wheels - Use extreme caution.
Tip:
The more stable you are able to get the grinder the better the blade will cut through the object.
Happy grinding. Don't forget safety glasses.
5. Lenox Tools 1972929 METALMAX Diamond Edge Cutoff Wheel, 14" x 1"
Feature
Delivers 1,000 or more cuts without changing the wheelAdvanced diamond technology provides 30X longer life than thin bonded cutoff wheels in metal cutting applications* *Average performance in 1" carbon steel square tube vs. thin bonded abrasive cutoff wheels.
Solid steel wheel body greatly reduces risk of breakage for added safety, increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cutoff wheels
Maintains original wheel diameter throughout the life of the blade for better control, reach, and precision
Does not wear down like bonded abrasives reducing dust particles for a cleaner work station
Description
Lenox MetalMax is the new standard for metal cutting abrasives. Breakthrough diamond technology delivers 1,000 or more cuts (30 times longer life than thin bonded cutoff wheels)* without sacrificing speed or finish. Made of solid steel to greatly reduce the risk of breakage, the combination of a steel body with a diamond edge allows MetalMax to hold its original wheel diameter until the last cut, meaning better control, reach, and cut precision throughout the wheel life. The enhanced design substantially reduces dust particles and lessens odor. Lenox MetalMax is suitable for metal cutting applications including steel, sheet metal, stainless steel, rebar, cast iron, aluminum and non-ferrous metals, and works at the same speeds and feeds as thin bonded abrasive wheels.6. IVY Classic 40088 Swift Cut 10-Inch x 3/32-Inch x 5/8-Inch Arbor, Metal Cut-Off Blade for Chop Saws, 1-Piece
Feature
Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Do not use on High Speed Saws, Swift Cut (Registered Trademark)Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only
Blade double reinforced with fiberglass mesh for durability and safety
Arbor reinforced with metal for extra strength
Diameter: 10-inch, Width: 3/32-inch, Arbor: 5/8-inch, Max RPM: 6,100
Description
IVY Classic Industries is dedicated to producing a comprehensive, quality line of power tool accessories and hand tools. IVY Classic Swift Cut Metal Cut-Off Blades are constructed out of resin bonded aluminum-oxide grain which enables faster cutting of steel, angle iron, sheet metal and other ferrous metal products. The blades feature double reinforced fiberglass mesh for durability and safety and metal reinforced arbors for extra strength. IVY Classic products: 40088, 40106 and 40108 are designed for use with chop saws.7. Freud 10" x 80T Ultimate Cut-Off Blade (LU85R010)
Feature
10" Blade Diameter, 80 Teeth, ATB Grind, 5/8" Arbor, .116" Kerf, 10 Hook AnglePremium TiCo HI-Density Carbide Crosscutting Blend for Maximum Performance
No Stabilizers needed
Unique Side Grind polishes the material to produce a superior finish
Perma-Shield Non-Stick Coating reduces blade drag, protects the blade from corrosion and pitch build-up.
Description
This superior blade gives glass-smooth finishes when crosscutting hard and soft woods, so no sanding is required. What makes this blade so special is the unique side grinding of each tooth. The teeth actually polish the material as it cuts. New laser-cut anti-vibration slots practically eliminate the vibration that resonates in standard blades, producing glass-smooth finishes. With a finish this perfect you wont need stabilizers!8. Lenox Tools 1972921 METALMAX Diamond Edge Cutoff Wheel, 4.5" x 7/8"
Feature
Delivers 1,000 or more cuts without changing the wheelAdvanced diamond technology provides 30X longer life than thin bonded cutoff wheels in metal cutting applications* *Average performance in 1" carbon steel square tube vs. thin bonded abrasive cutoff wheels.
Solid steel wheel body greatly reduces risk of breakage for added safety, increased productivity, reduced downtime, and a lower cost per cut compared to thin bonded cutoff wheels
Maintains original wheel diameter throughout the life of the blade for better control, reach, and precision
Does not wear down like bonded abrasives reducing dust particles for a cleaner work station
Description
Lenox MetalMax is the new standard for metal cutting abrasives. Breakthrough diamond technology delivers 1,000 or more cuts (30 times longer life than thin bonded cutoff wheels)* without sacrificing speed or finish. Made of solid steel to greatly reduce the risk of breakage, the combination of a steel body with a diamond edge allows MetalMax to hold its original wheel diameter until the last cut, meaning better control, reach, and cut precision throughout the wheel life. The enhanced design substantially reduces dust particles and lessens odor. Lenox MetalMax is suitable for metal cutting applications including steel, sheet metal, stainless steel, rebar, cast iron, aluminum and non-ferrous metals, and works at the same speeds and feeds as thin bonded abrasive wheels.9. 30Pcs Cutting Wheel Set for Rotary Tool - GOXAWEE 1/8" Shank Diamond Cutting Wheel, Mini HSS Saw Blades, Resin Cut Off Disc Combo Cutter Kit with Mandrels for Wood Glass Plastic Stone Metal
Feature
PACKAGE Details: 30Pcs Rotary tool mini cutting discs sets include 5 HSS wood cutting saw blade discs, 10 Diamond cutting discs wheels, 10 Resin Cutting Wheel Cut-off Discs & 5 MandrelsUnique Personality: GOXAWE Rotary Cut-Off Wheel Kit has 3 assorted cutting discs set for 3 needs, HSS mini saw blades for wood and plastic / Diamond cutting wheels for stone / Resin cutting wheels for metal
Multi-purpose Tool: The Cut-Off Wheels Set is suitable for all kinds of metal, wood, drywall, plastic, stone, ceramic, glass, hard alloy, the treasure jade stone processing and more / Ideal for cutting, grooving and trimming
Compatibility: 1/8" (3mm / 3.3mm) shank cutting disc mandrels fit for most power die grinders or rotary tools & air tools
High Quality: High working efficiency, perfect cutting effect. Basically replace with handle small cutting wheel / Ideal for DIY enthusiasts
Description
GOXAWEE Cutting Tool - Rotary tool Accessories - Wood Stone Metal Cutting Saw Blade Discs Cut-Off Wheels Set with 1/8" Mandrels for Power Rotary Tool & Die Grinders -Great Tool for DIYGOXAWEE Roatry Cutting Discs Sets are 100% brand new and high quality. Great for contractors and the home hobbyist.
Function & Application
Function: Cutting, Grooving & Trimming
The HSS Mini Circular Saw Blades have 5 sizes (0.88"/ 1"/ 1.26"/ 1.39"/ 1.74") for cutting wood and plastic, case modification, circuit boards and DIY production.
The Diamond Cutting Wheels are suitable for cutting stone, such as gemstones, glass, ceramics, porcelain, tiles, rocks...
The Resin Cutting Wheels are reinforced with fiberglass for increased durability / Perfect for cutting metal including hardened steel, Iron, aluminum...
Usage: Fit for dremel or other brand most rotary and air tools or Power die grinders.
Excellent Gift for DIY Enthusiasts: There are 3 types cutting discs to create a high working efficiency, perfect cutting effect, and convenient to cut, simple to use, safe and reliable.
Specification:
Material: HSS / Diamond / Resin
Shank Diameter: Approx.1/8" (3mm / 3.3mm)
HSS Saw Blades Dia: 22/ 25/ 32/ 35/ 44mm
Diamond Cutting Disc Dia: 25mm
Resin Cutting Wheel Dia: 32mm
Net Weight: 93 g
Package Include:
5 Mandrels
5 HSS Circular Saw Blades
10 Diamond Cutting Discs
10 Resin Cut-Off Wheels
GOXAWEE Tool is the source for hard-to-find mini tools for crafts and hobbies. We take great pride in providing the best customer service in America. Whether you are a professional craftsman, a robot builder, or a model building hobbyist who requires precision small tools and micro tools, GOXAWEE Tool can help.
10. IVY Classic 40106 Swift Cut 12-Inch x 3/32-Inch x 1-Inch Arbor, Metal Cut-Off Blade for Chop Saws, 1-Piece
Feature
Designed to cut steel, angle iron, sheet metal and other ferrous metal products, Do not use on High Speed Saws, Swift Cut (Registered Trademark)Resin bonded Aluminum-Oxide grain for faster cutting, Type 1 blade - for cutting only
Blade double reinforced with fiberglass mesh for durability and safety
Arbor reinforced with metal for extra strength
Diameter: 12-inch, Width: 3/32-inch, Arbor: 1-inch, Max RPM: 5,100
Recent Comments