Best grinding vise
If you looking for grinding vise then you are right place. We are searching for the best grinding vise on the market and analyze these products to provide you the best choice.
Best grinding vise
1. HFS (R) 2" PRECISION GRINDING SCREWLESS MINI INSERT VISE TOOLMAKER STEEL .0002"
Feature
Jaw Width 2"; Jaw Depth 1-1/4"Jaw Opening 3"; Length 6"
Oil hardened
Precision Ground
Description
Oil hardened. Precision Ground. Rapid positioning notches. .00025" square and parallel2. HFS (R) Precision Toolmakers Vise 2-1/2" NEW ; V-GROOVE, 0.0002",
Feature
All surfaces are hardened and precision ground square and parallel to accuracy of +/- 0002-inchesClamping slots are provided and jaws are easily replaced
Ground "V" ,holding of square and round parts, vertically and horizontally
2.5-inches jaw opening
Jaw measures 2-inches width by 1-inches depth
Description
All surfaces are hardened and precision ground square and parallel to accuracy of +/- 0002-inches. Clamping slots are provided and jaws are easily replaced. Ground "V" way. 2.5-inches jaw opening. Jaw measures 2-inches width by 1-inches depth.3. 3'' Screwless Toolmaker Grinding Ground Vise .0002 Steel Tool Making Vise
Feature
Tool Making Precision Grinding ViseJaw Width: 3";Jaw Opening: 4";Jaw Depth: 1-3/8"; Angular Center Channel Provides Extra Jaw Capacity
Vise is ground flat;Square and parallel within .0002";V-groove at movable jaw
Jaw can be Opened and Closed without Unbolting vise from Work Surface
Quantity: 1;Overall dimension: 3''L x 7-1/2''W x 3''H;Weight: 8.80 lbs
Description
End Pockets for Convenient Clamping in All Models4. AccusizeTools - Mini Precision Toolmakers Insert Vises, GA41-0050
Feature
Also used in large visesAPPROXIMATE DIMENSIONS: Jaw Width - 15/16"
Jaw Opening - 1/2"
Weight - 11oz.
Jaw Depth - 4/10", Length - 2-1/2"
5. HFS (R) 1" PRECISION GRINDING SCREWLESS MINI INSERT VISE TOOLMAKER STEEL .0002"
Feature
Jaw Width 1"; Jaw Depth 3/8" ; Jaw Opening 7/8"; Over Length 2-5/8"Oil hardened
Precision Ground
Size : Length: 2-5/8" width: 1" Height: 1.14"
Description
Oil hardened. Precision Ground. Rapid positioning notches. .00025" square and parallel width: 1 " Jaw Depth: 0.36" or 3/8"6. Starrett 581 Hardened Steel Precision Grinding Vise With T-Handle Wrench, 4" Jaw Opening, 1-1/4" Jaw Depth
Feature
Extremely useful for accurate grindingHardened steel construction
Ground flat, square, and parallel within 0.0002"
Jaw pressure on workpiece is forward and downward for repeatable positioning and maximum holding power
Movable jaw is slightly narrower than the base, enabling the vise to be used on its side
Description
1/4-20 tapped hole in each side of the solid jaw to allow the use of a stop for repetitive operations. T-handle wrench provided for tightening the movable jaw. Four drilled and counterbored holes for 5/16 bolts in the base of the vise for bolting to a sine plate or the bed of a machine tool. For attaching special jaw plates, two holes are drilled in both the solid and movable jaws.7. 3'' Screwless Toolmaker Grinding Ground Vise .0002 Steel Tool Making Vise
Feature
Tool making precision grinding viseJaw Width: 3" ; Jaw Opening: 4" ; Jaw Depth: 1-3/8"
Vise is ground flat; Square and parallel within .0002"
V-groove at movable jaw; Jaw can be Opened and Closed without Unbolting vise from Work Surface
Quantity: 1
8. Mini Toolmaker's Vise, 1-1/4 Inch Capacity
Feature
1-7/16 inch wide x 7/8 inch deep jawsCast and ground tool steel
Stands flat on base
Heavy-duty
Weighs 1-1/2 lbs
Description
Mini Toolmaker's Vise Holds Tight For Drill Press Work Machinists and toolmakers always lock their work in a vise. Our vise is cast and ground tool steel. Stands flat on base or side and has vertical and horizontal V grooves in one jaw face for holding round stock. A heavy-duty, well made tool for a lifetime of use. Weighs over 1-1/2 lbs. with 1-7/16 inch wide x 7/8 inch deep jaws. 1-1/4 inch capacity.9. HHIP 3900-2003 Ultra Precision Toolmaker's Vise, 3" Jaw Width (Pack of 1)
Feature
Vise bed scraped waysVees in sliding jaws
Hardened and precision ground, solid one piece construction
The "no-rise" jaw construction exerts a continual downward pressure to the jaw, eliminating tilting and lifting
Jaw can be opened and closed without unbolting from work surface
Description
HHIP Ultra precision toolmaker's vise. Vise bed scraped ways. Vees in sliding jaws. Hardness: 50-55 HRC. Hardened and precision ground, solid one piece construction. The "no-rise" jaw construction exerts a continual downward pressure to the jaw, eliminating tilting and lifting. Jaw can be opened and closed without unbolting from work surface. Square and parallel 0.0002".10. PROLINEMAX 1'' Precision Grinding Screwless Mini Insert Vise Toolmaker Steel .0002''
Feature
1'' mini insert toolmaker vise; Vise height: 1-1/8"Jaw width: 1"; Base hardened and ground
Jaw opening: 13/16" maximum; Squareness and parallelism to within .0002"
Jaw depth: 3/8"; Overall dimension: 2-1/2''L x 1''W x 1-1/8''H
Vise length: 2-1/2"; Weight: 8 ounce
Description
- 1'' mini insert toolmaker vise
- Jaw width: 1"
- Jaw opening: 13/16" maximum
- Jaw depth: 3/8"
- Vise length: 2-1/2"
- Vise height: 1-1/8"
- Base hardened and ground
- Squareness and parallelism to within .0002"
- Overall dimension: 2-1/2''L x 1''W x 1-1/8''H
- Weight: 8 ounce
Recent Comments