Best spot welder removal tool for 2019
Finding your suitable spot welder removal tool is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best spot welder removal tool including detail information and customer reviews. Let’s find out which is your favorite one.
Best spot welder removal tool
1. Blair 11096 Cutter Set
Feature
3) 3/8" Cutters; fit 3/8" and 1/2" hand held drill chucksArbor Assembly (11123) with skip proof Pilot
Extra pilot included
Made of M2 high speed steel
Made in the USA
Description
Features and Benefits: 3) 3/8" Cutters; fit 3/8" and 1/2" hand held drill chucks. Arbor Assembly (11123) with skip proof Pilot. Extra pilot included. Made of M2 High Speed Steel. Made in the USA. These annular tools cut clean, burr-free and round holes fast unlike twist drills that push or hole saws that tear through materials. There's no dead zone, so less thrust is required and no deforming of stock or jagged edges occurs. The cutters are for the heavy-duty use in sheet metal and materials up to 1/2" thick. Multiple cutting teeth, precision ground which allows for a long tool life. These cutters are packaged in a plastic carrying case.2. KCC Industries Spot Weld Cutter Set (2 Pack) + 2 Replacement Blades
Feature
DURABLE - Double-Sided 3/8" Heavy Duty High Speed Rotary Metal Cutting Blade Made From High-Quality Heat Resistant Steel. Our Center Pins are Made of a Higher-Quality, Thicker Steel than the Competition - Cutters with the Black Center Pin are Made of a Cheaper Metal and Snap EasilyFAST - Quickly Separates Spot-Welded Panels Without Distortion
PERFECT SIZE - 3/8" Diameter Cutting Blade is Ideal for Removing Spot Welds
UNIVERSAL FIT - 1/4" Standard Size Arbor with Flats to Eliminate Spinning in Chuck (fits 1/4" and larger drills)
VALUE - Includes 2 Arbors w/ Cutting Blades + 2 Replacement Cutting Blades. KCC Industries is veteran-owned, and we give the utmost attention to detail and customer satisfaction. Feel free to contact us with questions or concerns.
Description
KCC Industries DR4402 Premium Value Pack 3/8 Inch Double Sided High Speed Rotary Spot Weld Cutter Drill Bit Tool (2 Pack) + Bonus 2 Replacement BladesFeatures:
- Our materials are what set us apart from the rest. Our high quality heat resistant steel blades allow for reliable cuts over and over again.
- The perfect tool for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panel
- Alleviates the need to pry and break welds
- Double-sided blades allow for twice the efficiency
- Save time and money with this bonus pack that includes 2 arbors with cutting blades PLUS 2 extra blades!
- Extra blades allow you to avoid the risk of needing to pause in the middle of a job due to dulling blades
- Drill slow and steady when using these bits and use high temperature lube (not included) to maximize the life of the blades
- High temperature lube is the best way to extend blade life but is not required to use this tool. Simply replace the blade when it begins to dull
- Center pin on the bit is spring loaded and will depress to allow for tension and provide guidance to begin the cut
- Note: Pre-drilling a hole in the center of the spot weld or using a center punch to create a starting point provides extra guidance/stability when beginning the cut
- Everything is packaged into a durable plastic tube for easy transport and storage
- Great addition to any welder's tool kit!
- 2x Arbor w/ Double-Sided Cutting Blade
- 2x Double-Sided Replacement Cutting Blades
- Instruction Manual
Included in Package:
- KCC Industries is a veteran-owned business, and we offer a 100% satisfaction guarantee. If you are not completely satisfied with your purchase within 90 days, send it back for a full refund - no questions asked!
3. Pack of 13Pcs 3/8" Double Sided High Speed Rotary Spot Weld Cutter Drill Bit Tool
Feature
The perfect tool for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panelAlleviates the need to pry and break welds,Double-sided blades allow for twice the efficiency,Allow you to avoid the risk of needing to pause in the middle of a job due to dulling blades
Drill slow and steady when using these bits and use high temperature lube (not included) to maximize the life of the blades
Center pin on the bit is spring loaded and will depress to allow for tension and provide guidance to begin the cut
Everything is packaged into a durable plastic tube for easy transport and storage,Great addition to any welder's tool kit!
Description
Feature:The perfect tool for removing spot-welded panels or metal sheets without distorting the metal or damaging the underlying panel
Alleviates the need to pry and break welds,Double-sided blades allow for twice the efficiency
Allow you to avoid the risk of needing to pause in the middle of a job due to dulling blades
Drill slow and steady when using these bits and use high temperature lube (not included) to maximize the life of the blades
High temperature lube is the best way to extend blades life but is not required to use this tool. Simply replace the blades when it begins to dull
Center pin on the bit is spring loaded and will depress to allow for tension and provide guidance to begin the cut
Everything is packaged into a durable plastic tube for easy transport and storage
Great addition to any welder's tool kit!
Size: 2.3*4.5*9.5cm
4pcs/set includes 2pcs Drill Bit+2 pcs replacement blades
Note:
Pre-drilling a hole in the center of the spot weld or using a center punch to create a starting point provides extra guidance/stability when beginning the cut
Included:
13Pcs Spot Weld Cutter Drill Bit Tool
4. Bewant 13pcs Spot Weld Cutter, 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool w/replacement Blade Kit
Feature
3/8" Diameter Cutting Blade is Ideal for Removing Spot WeldsDouble-sided blades allow for twice the efficiency
Spot weld cutter drill bit for easily separate spot-welded panels without distorting the sheet metal
The double-sided blades are made of high quality heat resistant thicker steel,snap easily and long lifespan
Included: 1pc cutter Drill with double cutter + 10pc extra 3/8" cutters + 2pc Pilot Pin + Plastic Storage Case
Description
Features:
This weld cutter is double sided rotary cutter blade separates spot-welded panels more effectively than a panel cutter.
Allow you to avoid the risk of needing to pause in the middle of a job due to dulling blades
Drill slow and steady when using these bits and use high temperature lube (not included) to maximize the life of the blades
High temperature lube is the best way to extend blades life but is not required to use this tool. Simply replace the
blades when it begins to dull.
Note: Pre-drilling a hole in the center of the spot weld or using a center punch to create a starting point provides
extra guidance/stability when beginning the cut
Packages:
1x cutter Drill with double cutter
10x extra 3/8" cutters
2x Pilot Pin
1x Plastic Storage Case
5. Blair 11082 Cutter Set
Feature
(3) 3/8 " cuttersArbor assembly (11122) with standard pilot, and an extra pilot
Cutters fit 3/8" and 1/2" hand held drill chucks
Patented tooth geometry also prevents chip clogging when cutting steel, sheet metal, plastic and wood
Made of high speed steel
Description
Features and Benefits: (3) 3/8 " cutters. Arbor assembly (11122) with standard pilot, and an extra pilot. Cutters fit 3/8" and 1/2" hand held drill chucks. Patented tooth geometry also prevents chip clogging when cutting steel, sheet metal, plastic and wood. Made of High speed steel. These annular tools cut clean, burr-free and round holes fast unlike twist drills that push or hole saws that tear through materials. There's no dead zone, so less thrust is required and no deforming of stock or jagged edges occurs. The cutters are for the heavy-duty use in sheet metal and materials up to 1/2" thick. Multiple cutting teeth, precision ground which allows for a long tool life. These cutters are packaged in a plastic carrying case.6. Zinger Spot Weld Cutter, 2 Pack of 3/8" Rotary Spot Weld Cutter Remover Drill Bits Tool+ 4 Double Sided Replacement Blades
Feature
The spot weld cutter set includes:2 pcs x 3/8 inch rotary spot weld drill+4 replacement metal cutter bladesFit for: The 3/8" cutting spot welds remover fits most 1/4" drills, arbor with flats to eliminate spinning in chuck
Material: high-quality heat resistant steel to make sure high strength and durable.Quickly separates spot-welded panels without distortion.
Wide range use:iron, cast iron, alloy steel, carbon steel, die steel,die grinder, fix vehicle,drill holes,auto body renovations,etc.
Guarantee: No reason return or replace,if our spot weld bits not fit for your spot welding drill
Description
Zinger spot weld cutter, 2 pack of 3/8" drill bit metal hole cutter punch remover for power drill welding auto body work tool + 4 double sided replacement bladesFit for: The 3/8" cutting spot welds remover fits most 1/4" drills, arbor with flats to eliminate spinning in chuck
Material: high-quality heat resistant steel to make sure high strength and durable.Quickly separates spot-welded panels without distortion.
Wide range use:iron, cast iron, alloy steel, carbon steel, die steel,die grinder, fix vehicle,drill holes,auto body renovations,etc.
Guarantee: No reason return or replace,if our spot weld bits not fit for your spot welding drill
Package:
Packed with plastic tube,easy transport and storage
Including:2 pcs x 3/8 inch rotary spot weld drill+4 replacement metal cutter blades Note: Pre-drilling a hole in the center of the spot weld or using a center punch to create a starting point
7. Tresbro Spot Weld Cutter, 3/8 Inch Drill Bit Tools, Sheet Metal Hole Cutter Punch Remover Panel Separator for Power Drill Welding Auto Body Work Tool (2 Pack) + Bonus 2 Replacement Blades
Feature
Durable - Double-Sided high speed rotary metal cutting blade made from high-quality heat resistant steel.Quickly separates spot-welded panels without distortion.Perfect Size - 3/8" Diameter cutting blade is ideal for removing spot welds.1/4" Standard size arbor with flats to eliminate spinning in chuck (fits 1/4" and larger drills).
Usage - Iron, cast iron, alloy steel, carbon steel, die steel,die grinder, fix vehicle,drill holes,auto body renovations,etc.
VALUE - Including 2 arbors cutting blades + 2 replacement cutting blades.
Warranty - Enjoying your worry-free 12 months warranty for our spot weld drill.
Description
Specification:
Brand new
Material: high speed steel
Size: as shown in picture
Type: straight handle twist drill
Feature:
Cast iron and other difficult to process metal materials.
With cost-effective and practical.
Provides better panel separations than a panel cutter.
High strength and hardness.
Durable in use.
Package included:
2 pcs x Rotary Spot Drill+Bonus 2 Replacement Blades
8. Dent Fix Equipment SPOT ANNIHILATOR DELUXE KIT
Feature
SPOT ANNIHILATOR DELUXE KIT (DTF-DF-15DX)Description
The only high-torque drill with low speed for ultra high strengh steels. The Original Spitznagel Spot Weld Drill that applies the cutting pressure pneumatically. You do not have to push on the drill bit. Our patented valved cylinder applies gentle pressure toward the panel. When the drill bit starts to turn even more pressure is applied. This Smart pressure valve helps prevent breakage of bits and applies correct consistent pressure from the first to the last spot weld, ensuring the long life of your bits by preventing breakage. DF-15DX Kit includes: (1) 1000 RPM Spitznagel Spot Weld Drill (1) 8mm HSCO Bit (2) 8mm Titanium Coated HSCO Spot Weld Drill Bits (1) 10mm Titanium Coated HSCO Spot Weld Drill Bit (1) Bottle of Pneumatic Tool Oil (1) In-line Oiler (1) Deluxe Storage Case This tool can drill through UHSS or Boron Steel when used with the DF-1690 Tungsten Carbide Bits. We have lowered the RPM on all our Spot Weld Drills so that our new bits for Boron cut more efficiently.9. Neiko 10050A HSCO Spot Weld Drill Bit Set, 3 Piece, Titanium Coated
Feature
Drill bits are made from a high speed cobalt blend that makes it a great option for drilling into harder steel materialsTitanium coating on the drill bits not only prevents bit dulling for extended performance life but also offers smoother drilling
The flat shaft is made for a sure grip and special centering nib design avoids slipping
Set comes with handy aluminum, sponge cushioned case for snug and safe storage
Set includes: 3 piece set comes with 6.5mm (1/4"), 8mm (5/16"), and 10mm (3/8") drill bit that are clearly labeled both on the drill bit and case
Description
The 3 piece high speed cobalt spot weld drill bit set is made to last and withstand drilling into harder steel materials and stainless steel while offering you smooth drilling with titanium coating for extended performance. The cobalt blend construction gives the bits a tough core while the titanium coating allows for longevity of your bits that gives you a smoother drilling experience while lasting use after use. The set comes with three sizes ranging from: 6.5mm (1/4 inch), 8mm (5/16 inch), and 10mm (3/8 inch) that make it a handy set to have for any type of removing or cutting spot weld operations. The drill bits are clearly labeled for easy identification and is easily stored away in a small cushioned snap case.10. Blair 13224 3/8" Double End Spotweld Cutter
Feature
Contains one #13216 Arborone retractable Pilot and one 3/8" double-end Cutter.
Recent Comments