Best amp probe clamp for 2020
There are many reasons you might choose to buy amp probe clamp but it is not easy to find the best suitable amp probe clamp for you. But don’t worry! We did some of the work for you already by researching a few models on the current market. Let’s check following article to find the best amp probe clamp.
Best amp probe clamp
1. Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600
Feature
Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity testsThe clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
Comes with a handy carrying pouch, perfect for use while you're on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
2. Pico TA018 60A AC/DC Current Probe, BNC Connector
Feature
60A AC/DC current probe with BNC connector20A / 60A DC (low amps) current clamp
For use with PicoScope automotive oscilloscopes
Description
Pico TA018 60A AC/DC Current Probe, BNC ConnectorPico TA018 60A AC/DC Current Probe, BNC Connectorx20 A / 60 A DC (low amps) current clampThe TA018 current clamp is ideal for use with PicoScope automotive oscilloscopes for measuring currents between 10 mA and 60 A. This enables the PicoScope to display current waveforms for fuel injectors and fuel pumps.The current clamp has two calibration settings, set by a slider switch on the handle of the probe. 1 mV/10 mA (100 mV = 1 A) - use this for testing currents up to 20 A. 1 mV/100 mA (10 mV = 1 A) - use this for testing current up to 60 A.In use there is no need to break into the circuit or disturb the isolation as the opening jaws simply clamp around the current carrying conductor. No electrical contact is required.These current clamps have been designed for use with PicoScope oscilloscopes and feature additional screening to reduce noise pickup. The Pico TA018 current clamp can either be purchased as an accessory within one of our popular diagnostic kits or individually under the packing code PP264.Connecting the current clampThe TA018 current clamp features a BNC connector and can be plugged directly into a PicoScope.Once connected to the PicoScope, switch the current clamp on (green LED should light) and then clamp the jaws around the current carrying conductor as shown.Typical UsesThe TA018 current clamp simply offers the best value for money without compromising resolution. This current clamp has multiple uses and, with a flexible measurement range from 10 mA to 60 A, the TA018 clamp is suitable for applications such as: Petrol and diesel injector operation Solenoid testing Throttle motor functions EGR actuator testing Broadband 02 sensor testing (in conjunction with current multiplier) High current consumption tests up to 60 Amps (Motor lock up test) Parasitic drain measurements3. Klein Tools CL110KIT Electrical Tester / Maintenance Kit w/Clamp Meter, Continuity Tester, GFCI Tester, Line Splitter, Case, Leads, 3 x AAA
Feature
Measure AC current via the clamp, and AC/DC voltage, resistance and continuity via test leadsDetects the most common wiring problems in standard and GFCI receptacles including open ground, reverse polarity, open hot, open neutral and hot/ground reversed
Line splitter allows the measuring of current draw up to 15A without splitting the load's power cord
CAT III 600V, Class 2, Double insulation safety rating
AC Auto-Ranging 400 amp digital clamp meter
Backlit display for clear readings
Includes a case, test leads and batteries
Description
Klein Tools Clamp Meter Kit includes the CL110 400A Auto-Ranging Digital Clamp Meter, RT210 GFCI Receptacle Tester and 69409 Line Splitter 10x. The kit allows for easy testing of live circuits and measuring of voltage. The kit includes a carrying pouch, test leads and batteries. Includes a case, test leads and batteries. For more than 160 years, Klein Tools has manufactured premium-quality, professional-grade hand tools that deliver the performance, durability and precision needed to get the job done right. Our family of engineers, workers and craftsman continue to put six generations of expertise into every tool we create by using only the highest quality materials, superior workmanship, and keeping manufacturing as close to home as we can. Klein isn't just the name of our company, it's also our family name. And since we're an American company that's family-owned and family-run, you know you can count on us to be here tomorrow. Klein Tools doesn't just make great products, we make great products that stand up to the demands of the professionals who use them every day ... Since 1857.4. Fluke i400 400 Amp AC Current Clamp
Feature
Companion to a digital multimeters to measure up to 200A AC1mA per amp output guarantees easy reading on you meter
Take accurate current readings without breaking the circuit
Maximum conductor diameter 20mm, CAT III 600V safety rating
Companion to your DMM to measure up to 400 A AC
1mA/Amp output guarantees easy reading on you meter
Only current clamp available with a CAT IV 600 V / CAT III 1000 V safety rating
Specially designed to offer maximum utility in a very compact shape
Soft non-slippery overmold handle prevents from accidental touching live wiring
5. ESI 695 80 Amps DC/AC Low Current Probe
Feature
Compatible with many lab scopes and graphing multimetersUse to generate current waveforms for diagnostic analysis
Also works great with digital multimeters
Jaw opening of 1/2 inch clamps over most negative battery cables
Low battery indication, auto power-off
6. INNOVA 3347 Digital Multimeter AMP Probe
Feature
Ideal for testing alternator output, starter and battery current draw and all other electrical wiring circuitsOperating range 0-600 AMP AC/DC
Features 2-foot test lead, slide switch for measurement selection and zero adjuster for calibration
Red/Green indicator light shows power and low battery
Designed to work with all Digital Multimeters
7. Electronic Specialties 697 400 Amp DC/AC Current Probe
Feature
Great tool for testing starting and charging systemsOne touch zero adjust and low battery indication
Works with digital multimeters, scopes or graphing meters
High current measuring capability up to 400 amperes AC/DC
Unit also features auto power off, saves batteries
8. PDI CA-60 Handheld 60 Amp AC/DC Current Clamp Probe, Red
Feature
60A AC/DC Amp Clamp ProbeUse with most DMM
Zero/Calibration Function
2-year warranty
9. PDI CA-600 Handheld 600 Amp AC/DC Current Clamp Probe, Gray
Feature
Connects to any banana plug inputsUse with most DMM
Zero/Calibration Function
2-year warranty
10. Bluetooth AC DC Clamp Mutlimeter Amp Meter with Temp Testing, Auto-ranging Measures Current, Voltage, Resistance, Capacitance, Continuity, Amperage, Volt, Ohm Clamp-on Ampmeter (BTMETER BT-570CAPP)
Feature
AC & DC Digital Clamp Multitester 4000 Counts Auto-range AC/DC amps clamp multimeter measuring AC/DC current, AC/DC voltage, Resistance,capacitance, audible beep continuity, Temperature, diode and Frequency(Hz),Duty Cycle, Data Hold.Bluetooth APP Clamp Ammeter Auto pair with Android / IOS phone,support for real-time measurement reading in Max/Min/Average, with timing and curve graph. And save the measurements in TXT/Excel files for data logging
AC/DC Inductive Clamp Amp MeterNeat Bright Backlit LCD display, Big Jaw Caliber Size 1.77 inches. Make sure press REL to zero out the meter before clamping, or the meter will show bias numbers without any wire in the clamps due to the magnetic field.
Accurate Voltage Amperage Meter0.1A resolution for 0.1~400A AC DC amp, 1A for 400A~1000A to support accurate amp reading for low and high current. Ideal non-contact ampere multimeter to troubleshoot electrical problems in automotive, household, HVAC, vehicle boat motor diagnosis
Clamp On Live Wire for AC DC Amp TestTo measure amp with ANY clamp meter, you MUST separate the hot and neutral conductors or they will cancel each other out and give a zero amp reading. The most convenient way without peeling the cord is clamp on an AC Line Splitter
Recent Comments