Top arduino micro processor for 2020
If you looking for arduino micro processor then you are right place. We are searching for the best arduino micro processor on the market and analyze these products to provide you the best choice.
Best arduino micro processor
![Arduino Micro with Headers [A000053]](https://m.media-amazon.com/images/I/41CEC9Gnj1L.jpg)
1. ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)
Feature
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMOThe Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.
Description
The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in
Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g
Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.
2. Arduino Micro with Headers [A000053]
Feature
The Micro is a microcontroller board based on the ATmega32U4 (datasheet), developed in conjunction with Adafruit.It has 20 digital input/output pins (of which 7 can be used as PWM outputs and 12 as analog inputs), a 16 MHz crystal oscillator, a micro USB connection, an ICSP header, and a reset button.
It contains everything needed to support the microcontroller; simply connect it to a computer with a micro USB cable to get started. It has a form factor that enables it to be easily placed on a breadboard.
The Micro board is similar to the Arduino Leonardo in that the ATmega32U4 has built-in USB communication, eliminating the need for a secondary processor.
The Micro can be powered via the micro USB connection or with an external power supply. The power source is selected automatically.
3. HiLetgo ESP-WROOM-32 ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with Antenna RF AMP Filter AP STA for Arduino IDE
Feature
2.4GHz Dual Mode WiFi + Bluetooth Development BoardUltra-Low power consumption, works perfectly with the Arduino IDE
Support LWIP protocol, Freertos
SupportThree Modes: AP, STA, and AP+STA
ESP32 is a safe, reliable, and scalable to a variety of applications
4. KeeYees Pro Micro ATmega32U4 5V 16MHz Micro USB Development Board Module Microcontroller for Arduino IDE Leonardo Bootloader (Pack of 3pcs)
Feature
ATMega32U4 running at 5V/16MHz, maximum voltage on the RAW pin is 9V, recommended voltage 6-7V.Supported by Arduino IDE V1.0.1; 4 x 10-bit ADC pins, 12 x Digital I/Os; Rx and Tx Hardware Serial Connections.
Just connect to the On-Board micro-USB connector for programming. (If this module cannot be recognized by your computer, please refer to this link to install the driver https://www.arduino.cc/en/Guide/DriverInstallation)
The PRO Micro board can be powered via the micro USB connection or with an external power supply.
Please click the [Tool] and choose the module [Arduino Leonardo] when you open the Arduino IDE software.
5. FTCBlock Arduino pro Mini Nano V3.0 ATmega328P 5V 16M Microcontroller kit Without USB Cable Compatible with Arduino Nano V3.0 (3pcs)
Feature
The Nano is using the chips ATmega328Pand CH340, not FT232 as official Arduino.
Small Arduino UNO Board:It is a smallest,complete and breadboard friendly board. It has everything that Arduino/Genuino UNO has (electrically) with more analog[A1]; input pins and on board +5V AREF jumper.
More Breadboard Space:Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically[A2]; selected to the highest voltage source.
Usage: The Nano is 100% compatible with Arduino, with the same chips ATmega328P and CH340 with the official version[A3]
6. Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)
Feature
Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on programming software.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.
7. Emakefun for Arduino Nano V3.0, Micro USB Nano Board ATmega328P 5V 16M Micro-Controller Board (5PCS)
Feature
Emakefun Nano used common Micro-USB instead of Mini-USB.6-20V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.Emakefun Nano is a small, complete, breadboard-friendly andhigh qualityboard based on the Atmega328P-AU MCU.Support ISP download, USB download and USB Power
Emakefun Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino,so pls.use the driver from this link:https://github.com/emakefun/emakefun-nano-kit
We used high quality PCB original material and Immersion Gold Technology to make sure every board has smooth edge and more reliable quality to make sure every board has smooth edge and more reliable quality
Nano's got the breadboard-ability of the Boarduino and the micro+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other)
8. FTCBlock Mini Nano V3.0 ATmega328P Microcontroller Board with USB Cable for Arduino (1pcs Board+1pcs Cable)
Feature
Matters Need Attention:Before running the procedure, pls install the corresponding computer system CH340 driver,and processor needs to select Old Bootloader,otherwise it won't work or accept programs from arduino IDE.Operating Voltage (logic level) 5 V;Input Voltage (recommended) 7V-12V
Digital I/O Pins 14 (of which 6 provide PWM output)
Flash Memory 32 KB (ATmega328) of which 2 KB used by bootloader
Matters Need Attention:Before running the procedure, pls install the corresponding computer system CH340 driver.Please contact us if you need the CH340 driver.
9. MELIFE 2 Pack ESP32 ESP-32S Development Board 2.4GHz Dual-Mode WiFi + Bluetooth Dual Cores Microcontroller Processor Integrated with ESP32s Antenna RF AMP Filter AP STA for Arduino IDE
Feature
2 PACK 2.4GHz Dual Mode WiFi + Bluetooth Development BoardUltra-Low power consumption, works perfectly with the Arduino IDE
4M Memory, Support LWIP protocol, Freertos
SupportThree Modes: AP, STA, and AP+STA, Voltage for USB powered is 5V; voltage for power supply is 3.3V
ESP32 is a safe, reliable, and scalable to a variety of applications
10. ESP32 ESP-32S Development Board 2.4GHz Dual Mode WiFi + Bluetooth Dual-core Microcontroller Processor, Integrated ESP32s Antenna RF AMP Filter AP STA, For Arduino IDE WiFi, Dual-core CPU Core Board ES
Feature
The ESP32-CAM is a WIFI and Bluetooth dual-mode development board that uses an ESP32-based PCB-on-board antenna and core. It can run independently as the minimum systemESP integrates WiFi, traditional Bluetooth and BLE Beacon, two high-performance 32-bit LX3 CPUs, 7-stage streamline structure, frequency range from 80MHz to 240MHz, on-chip sensor, hall sensor, temperature sensor, etc.
Fully compatible with WiFi 802.11b/g/n/e/i and Bluetooth 4.2 standards, can be used as a master mode for building standalone network controllers or as a network function for existing devices from MCUs in other hosts
The ESP32-CAM can be used in a variety of IoT applications. It is suitable for home smart devices, industrial wireless control, wireless monitoring, QR wireless identification, wireless positioning system signals and other IoT applications. It is the ideal solution for IoT applications
About us: Our goal and our store and company are to provide customers with quality and innovative products. In addition, we offer a 12-month warranty to address quality-related issues and guarantee 7*24 after-sales service
Recent Comments