Top arduino nano 33 iot kit for 2022

Finding your suitable arduino nano 33 iot kit is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best arduino nano 33 iot kit including detail information and customer reviews. Let’s find out which is your favorite one.

Best arduino nano 33 iot kit

Product	Features	Editor's score	Go to site
	ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)		Go to amazon.com
	KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry Pi Programming, Electronics Components STEM Education Set for Kids Teens Adults + Tutorial		Go to amazon.com
	Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)		Go to amazon.com
	Beginning Arduino Nano 33 IoT: Step-By-Step Internet of Things Projects		Go to amazon.com
	IoT Projects with Arduino Nano 33 BLE Sense: Step-By-Step Projects for Beginners		Go to amazon.com
	ESP8266 Weather Station Kit with DHT11 Temperature Humidity BMP180 Atmosphetic Pressure BH1750FVI Light Sensor 0.96" OLED IIC YellowBlue Display for Arduino IDE IoT Starter(Guidance Document Included)		Go to amazon.com
	Arduino Nano 33 IoT [ABX00027]		Go to amazon.com
	Arduino Nano 33 IoT Development Workshop		Go to amazon.com
	Arduino Nano 33 IoT with Headers [ABX00032]		Go to amazon.com
	ESPduino Development Board for UNO R3 Based on ESP8266 Wireless WiFi Communication Module for IoT Lua Project, CH340 CH340C Smart Electronic Shield, Compatible with Arduino IDE for Robot Arm Smart Car		Go to amazon.com

Related posts:

1. ELEGOO Nano Board CH 340/ATmega+328P Without USB Cable, Compatible with Arduino Nano V3.0 (Nano x 3 Without Cable)

Feature

You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2jKlJMO
The Nano is using the chips ATmega328P and CH340, not FT232 as official Arduino, so pls. use the driver from above link.
It is a smallest, complete, and breadboard friendly board. It has everything that Diecimila/Duemilanove has (electrically) with more analog input pins and onboard +5V AREF jumper.
Nano's got the breadboard-ability of the Boarduino and the Mini+USB with smaller footprint than either, so users have more breadboard space. It's got a pin layout that works well with the Mini or the Basic Stamp (TX, RX, ATN, GND on one top, power and ground on the other).
The Nano can be powered via the Mini-B USB connection, 7-12V unregulated external power supply (pin 30), or 5V regulated external power supply (pin 27). The power source is automatically selected to the highest voltage source.

Description

The Nano is a small, complete, and breadboard-friendly board based on the ATmega328 (Arduino Nano 3.x). It has more or less the same functionality of the Arduino/Genuino UNO, but in a different package. It lacks only a DC power jack, and works with a Mini-B USB cable instead of a standard one.
You could download the driver of Elegoo Nano V3.0 at: http://bit.ly/2pMF4in

Technical specs
Microcontroller: ATmega328
Architecture: AVR
Operating Voltage: 5 V
Flash Memory: 32 KB of which 2 KB used by bootloader
SRAM: 2 KB
Clock Speed: 16 MHz
Analog I/O Pins: 8
EEPROM: 1 KB
DC Current per I/O Pins: 40 mA (I/O Pins)
Input Voltage: 7-12 V
Digital I/O Pins: 22
PWM Output: 6
Power Consumption: 19 mA
PCB Size: 18 x 45 mm
Weight: 7 g


Package Include :
3 X Nano Board
ATTENTION:
We dont have USB cables in this kit and you will need to buy a mini USB cable to use this NANO board.

2. KEYESTUDIO 37 in 1 Sensor Kit 37 Sensors Modules Starter Kit for Arduino Mega R3 2560 Raspberry Pi Programming, Electronics Components STEM Education Set for Kids Teens Adults + Tutorial

Feature

The kit gives 37 kinds of common sensors, such as analog alcohol sensor, joystick module, vapor sensor, photocell sensor etc, allow you make a lot of interesting projects
Intended to be used with the ARDUINO platform, but can also be used with the Raspberry Pi platform, STM32, 51, MICRO BIT as well
We have detailed tutorial( included introdutions, pictures and code) and video(37 projects), step by step to explain how to use
Each sensor is packaged individually and then hold in a beautiful polystic box with compartments, it must be the best gift for your children, your friends and electric lover
Has FCC and Rohs certification, this high quality sensor kit made from environmentally friendly materials and technology, they are safe and excellent

Description

37 in 1 Sensor Kit for Arduino List
1: Digital White LED Light Module project
2: Piranha LED Light Module
3: 3W LED Module
4: RGB LED module
5: Analog temperature sensor
6: Photocell sensor
7: Analog Sound Sensor
8: Analog Rotation Sensor
9: Passive Buzzer module
10: Digital Buzzer Module
11: Digital Push Button
12: Digital Tilt Sensor
13: photo interrupter module
14. Capacitive Touch Sensor
15: Knock Sensor Module
16: Hall Magnetic Sensor
17: Line Tracking Sensor
18: Infrared Obstacle Avoidance Sensor
19: PIR Motion Sensor
20: Flame Sensor
21: Vibration Sensor
22: Analog Gas Sensor
23: Analog Alcohol Sensor
24: Digital IR Transmitter Module
25: Digital IR Receiver Module
26: Rotary Encoder module
27: LM35 Temperature Sensor
28: 18B20 Temperature Sensor
29: ADXL345 Three Axis Acceleration Module
30: DHT11 Temperature and Humidity Sensor
31: Bluetooth Module
32: TEMT6000 ambient light sensor
33: SR01 Ultrasonic Sensor
34: Joystick Module
35: DS3231 Clock Module
36: 5V Relay Module
37: Vapor Sensor

3. Nano V3.0, Nano Board ATmega328P 5V 16M Micro-Controller Board Compatible with Arduino IDE (Nano x 3 with USB Cable)

Feature

Original ATmega328P CH340 chip is used. Improved new version CH340G Replace FT232RL.
LAFVIN Nano V3.0 card is 100% compatible with the Nano card, and fully compatible with Windows, Mac and Linux operating system.
Works the same as original Nano, runs perfectly on programming software.
Using Atmel Atmega328P-AU MCU, Support ISP download; Support USB download and Power.
LAFVIN Nano CH340 controller is a compact board similar to the R3 board, smaller and breadboard-friendly than Diecimila.

4. Beginning Arduino Nano 33 IoT: Step-By-Step Internet of Things Projects

5. IoT Projects with Arduino Nano 33 BLE Sense: Step-By-Step Projects for Beginners

6. ESP8266 Weather Station Kit with DHT11 Temperature Humidity BMP180 Atmosphetic Pressure BH1750FVI Light Sensor 0.96" OLED IIC YellowBlue Display for Arduino IDE IoT Starter(Guidance Document Included)

Feature

The weather station uses the ESP8266-12E to obtain data from the Internet: time of a city, weather data and forecast information for the next 3 days, scrolling on the 1306 OLED Display; the device can switch to display data from any city in the world - maybe your relatives or friends live there
The device uses sensors DHT11, BMP180,BH1750FVI to collect temperature, humidity, Atmosphetic Pressure and light data. The weather station reads data indoor via sensor every 5 seconds and uploads it to the Internet every 60 seconds.You can see real-time data charts from your phone or computer.Of course you can modify the code to implement different functions
ESP8266:CP2102 chip inside,Micro USB,4MB flash,full I/O port and wireless 802.11 supported IOT platform Arduino compatible. DHT11 Sensor: A digital signal output with a calibrated temperature and humidity combined sensor.The simple communication protocol greatly reduces the programming effort required
BMP180:high-precision, small size, ultra-low power 3A pressure sensor.Its performance excellence, the absolute accuracy of the lowest can reach 0.03hPa.Can directly through the I2C bus connected with a variety of microprocessors.Pressure range: 300 ~ 1100hPa. BH1750FVI:Digital Light intensity Sensor.Direct digital output, complex calculation is omitted, omitting calibration. OLED Yellow Blue Display:0.96" 1306 128X64 Yellow&Blue OLED LCD Display with I2C IIC SPI Serial
We have prepared weather station hardware.And 50M guidance manual,demo code,burning tools,necessary class libraries.Download link label is pasted at the bottom of the packaging box.or contact us on Amazon,we will send download link to you.Package List1 x Esp8266-12E,1 x DHT11,1 x BMP180,1xBH1750FVI ,1 x OLED Display,2 x breadboard,20 x dupont cable,1 x usb cable

7. Arduino Nano 33 IoT [ABX00027]

Feature

The ease of use of a Nano board with the addition of secure IoT and BT connectivity
Small (45mm x 18mm), robust and powerful board; 3.3V variant of the Nano family. Arm Cortex-M0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox
Clock up to 48MHz, Flash 256KB, SRAM 32KB, Secure WiFi and Bluetooth connectivity with a 6-axis IMU, ECC608A crypto chip provides IoT security. Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
Pre-certified module with external processor ensures maintaining RF compliance when writing application code.Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.3V power supply to peripherals at significant output current
On-board DC-DC power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating

8. Arduino Nano 33 IoT Development Workshop

9. Arduino Nano 33 IoT with Headers [ABX00032]

Feature

The ease of use of a Nano board with the addition of secure IoT and BT connectivity
Small (48mm x 18mm), robust and powerful board; 3.3V variant of the Nano family. Arm Cortex-M0+ microcontroller and a pre-certified ESP32-based WiFi and Bluetooth module from u-blox
Clock up to 48MHz, Flash 256KB, SRAM 32KB, Secure WiFi and Bluetooth connectivity with a 6-axis IMU, ECC608A crypto chip provides IoT security. Two 15 pins connectors (one on each side) that are pin to pin compatible with the original Arduino Nano
Pre-certified module with external processor ensures maintaining RF compliance when writing application code.Run directly from high voltages from lead or multi-cell Lithium-ion batteries providing 3.3V power supply to peripherals at significant output current
On-board DC-DC power supply enables the board to be powered up to 21V maintaining high efficiency and offering a lot of current to external devices without overheating

10. ESPduino Development Board for UNO R3 Based on ESP8266 Wireless WiFi Communication Module for IoT Lua Project, CH340 CH340C Smart Electronic Shield, Compatible with Arduino IDE for Robot Arm Smart Car

Feature

Compatible with Arduino IDEThe ESPduino development board is compatible with Arduino IDE if already installed the ESP8266 files on Arduino. So, it will be much convenient to develop the arduino-related code with wirless WiFi communication function, and it would be easy and quick to develop IoT projects.
How to UseTo use this board by the two steps: 1) search and install the esp8266 boards.txt; 2) select the board type as nodemcu v1 or other choices. Then you can compile and download the Arduino source code.
About this BoardThe ESPduino has a ESP-13 WiFi module. The chip is also ESP8266. So, all of the ESP8266 source code and bin files can also be used on this board. Importantly, the Arduino code is also suitable with this board.
Serial ChipThe serial chip is CH340C. So, you should install the CH340 driver program before use it.
What You GetYou will get: ESPduino development board: 1pcs; USB cable: 1pcs. When you get it, you can develop the arduino code based on this board.

Conclusion

All above are our suggestions for arduino nano 33 iot kit. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using arduino nano 33 iot kit with us by comment in this post. Thank you!