Top axial wraith beef tubes for 2020
If you looking for axial wraith beef tubes then you are right place. We are searching for the best axial wraith beef tubes on the market and analyze these products to provide you the best choice.
Best axial wraith beef tubes
1. Vanquish Products Incision 1/4 Stainless Steel Link Kit, (10): Wraith, VPSIRC00040
Feature
Incision 1/4 Stainless Steel Link Kit, (10): WraithDescription
Key Features
- Includes all that is needed to replace the plastic links on the suspension and steering
- Made from stainless steel for durability at a more affordable price
- (1) Stainless Steel Drag Link
- (4) Stainless Steel Upper Links
- (4) Stainless Steel Lower Links
- (1) Stainless Steel Tie Rod Links
- (4) M3x20 BHSCS SST
- (4) M3x25 BHSCS SST
- (20) Rod Ends with Steel Hollow Balls
Overview
This is the Inicsion 1/4 Stainless Steel 10pc Link Kit for Axial Wraith.
Weight comparison to Axial Wraith 10pcs 3/16 Titanium Link Set (VPS03138)- 10 Stainless Steel Links* = 8.95 oz
- 10 Titanium Links* = 2.92 oz
- * Weight does not include rod ends
2. Axial Wraith Spawn 4WD RC Rock Racer Off-Road 4x4 RTR with 2.4Ghz Radio & Waterproof ESC, 1/10 Scale RTR
Feature
Built to blast through wide-open deserts and the toughest trailsRipsaw 2.2 tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels
Full tube-frame chassis design is manufactured with high strength composite materials
Realistic driver figure includes a race suit and three interchangeable helmets
Includes vehicle, body, 2.4GHz radio, motor, ESC, and figure
Description
The Axial Wraith Spawn is packed with performance features. The virtually bulletproof AR60 OCP axles are ready take the Spawn through its paces whether blasting through the wide open desert or hammering its way through the toughest rock trails. The Ripsaw 2.2 tires are a proven true grip standard, wrapped around industry proven Method IFD beadlock wheels. Whether you are rock racing or just backyard bashing, the Wraith Spawn is ready for action.
The waterproof receiver box utilizes three different silicone seals: one for the antenna, one for the servo wires (includes three slots for three channels), and one acts as a gasket for the receiver box cover. No more stress when running in mud, water, or snow!
Our dual slipper design clutch uses a pad on each side of the spur gear for added surface area. This allows for more precise tuning and holding power. The spur gear features strong, 32 pitch gearing for high torque applications.
Officially licensed Method 12 spoke beadlock wheels dressed in an aggressive all black style are easy to assemble and they work with most 2.2 tires. The hub design allows this wheel to mount to any Wraith, AX10 Ridgecrest or SCX10. Axial 2.2 Ripsaw tires offer both a realistic and aggressive tread design for the ultimate scale appearance and performance.
The Axial waterproof AE-5 ESC is 3S LiPo capable yet easily switched in the field between LiPO and NiMh battery types with a simple jumper.
The AX-3 2.4GHz transmitter is a two channel, pistol grip radio with servo reversing switches for steering and throttle, trim dials for fine tuning steering and throttle centers. The battery indicator light also lets you know when your transmitter batteries run low. AR-3 2.4GHz receiver uses no crystals so you'll experience worry free driving with no frequency conflicts. This lightweight, compact, and bind button equipped receiver with LED indicator makes setup easy.
The included Tactic water-resistant TSX45 metal gear servo is rated at 151 oz-in of torque for massive turning power and dual ball bearings provide smooth and precise movement for the metal gear train.
The WB8 HD front and rear driveshafts feature an updated design with a larger diameter cross pin (2x11mm) along with an M4 Screw Shaft (2mm hex drive) for added strength. A center splined slider floats between each end and features added material which reduces flex and fatigue.
The Wraith Spawn includes a realistic driver figure complete with a race suit and three interchangeable helmets. A motocross, open skull-face or motorsport version of the helmet are included.
The Wraith Spawn includes a number of features that are either waterproof or water resistant. Do not run your product in water or snow or submerge it in water without fully waterproof gear.
Requires: 6-cell NiMH or 2S LiPo pack, charger and four "AA" batteries
3. Xtra Speed Stainless Steel Axle Tubes for AXIAL Wraith RR10 Bomber Yeti & Yeti Score #XS-AW230050
Feature
For: Crawlers installed with a front AR60 Axle (WRAITH RR10 Bomber Yeti & Yeti Score )Material: Steel
Color: Silver
*Photos for reference only. To install, take out all screws including the bottom grub screw and insert the tube by pushing it all the way. Install bearing onto drive shaft and push all the way in, after install the bearing will sit flush with the axle.
4. Beef Tubes Beef Tips - Wraith / Bomber - Brass (4)
Feature
Beef Tubes Beef Tips - Wraith / Bomber - Brass (4)5. Beef Tubes NARROW XR MOD Brass BEEF TUBES - SPLINED
Feature
Beef Tubes NARROW XR MOD BRASS BEEF TUBES - SPLINED6. Beef Tubes AR60 Differential Cover - Brass
Feature
Weight = 1.9 ounces (54grams)7. Axial Wraith 1.9 1/10 Scale Electric 4WD RTR RC Rock Crawler with 2.4GHz Tx/Rx System, Black
Feature
1/10 scale RC platform delivers technical rock crawling prowess that takes command over mud, rocks, sand, and through any kind of backyard terrainFull tube frame Chassis, all metal gear ax10 transmission, dual slipper clutch, 4-link rear suspension, and WB8 HD wildboar driveshaft's
Detailed scale looks: molded V8 engine replica, molded plastic grille and radiator with LED lights, turbocharger detail (included, not installed)
Includes: Axial Wraith 1.9 4WD RC RTR | Stx2 2.4GHz 2-channel TX | SRX200 RX | TSX45 metal gear servo | 35T motor | waterproof ESC with drag brake
Requires (sold separately): Battery (2-3 Cell LiPo or 5-9 Cell NiMH/NiCd with IC3/EC3 connector) | charger | 4 x AA alkaline
8. GoolRC Stainless Steel Axle Tubes for Axial Wraith AX10 RR10 RC Car
Feature
100% brand new and high quality.Suitable for Axial Wraith AX10 RR10 RC Car.
Made of stainless steel material for exceptional performance, anti-rust and water-proof.
The tubes also act as a weight on the front axles which will increase grip generated and make crawling obstacles much easier.
Perfect to protect axle of the car.
9. RZXYL Aluminum Front and Rear Axle for 1/10 Axial Wraith 90018 90048 90053 90018 90020 90045 90056 RR10 RC Model Crawler Car (Black)
Feature
Material:High quality Alloy CNC process technology Suit For:1:10 Axial Wraith 90018 90020 90031 90045 90056 90048 90053 RR10 Built for extreme off-road capability that takes you to new places and new adventures.Advantage:High quality materials,superb craftsmanship,Lightweight,beautiful shape,durable. Made your car more attractive and cooler.
Machined from aluminum and anodized for good looks Directly replace Original plastic portal axles housing
Lightweight upgrade enhances car's performance in handling and durability, providing unmatched driving versatility
Customer service: If you have any question,please contact us and we will offer professional service to solve your problem
10. Que-T 1 Pair Brass Steering Knuckles Weight for 1/10 Scale RC Wraith Axial 90018 Crawler Car
Feature
Quantity : 1Pair /KitWeight: approx. 200g/Pair
Steering knuckle brass weights for 1/10 RC Axial Wraith 90018 Crawler Car
Add weights to your rc crawler, have better balance
Upgraded brass parts, high quality for long term use
Recent Comments