Top fittings for aluminum track-multi packs for 2022
If you looking for fittings for aluminum track-multi packs then you are right place. We are searching for the best fittings for aluminum track-multi packs on the market and analyze these products to provide you the best choice.
Best fittings for aluminum track-multi packs
1. US Cargo Control Double Stud L Track Fitting with Pear Link - Use with L Track Rails in Your Truck Or Trailer to Create Instant Tie-Down Anchor Points - Working Load Limit of 1,666 Pounds - 10 Pack
Feature
VERSATILE - This L Track Double Stud Fitting can be installed at any location on L Track rails to create strong and secure tie-down points for motorcycles, ATVs, garden tractors, and more.HEAVY-DUTY - With a working load limit of 1,666 pounds and an assembly break strength of 5,000 pounds, you can tie-down with confidence knowing your cargo is safe and secure with L Track hardware.
COMPATIBILITY - This L Track stud fitting will work with all L Track styles such as Standard L track, Aircraft Style Seat Track, Angled L Track, and Recessed L Track.
EASY TO USE - To slide into place: lift the end clip and insert the two bottom discs into the airline track accessories slots. Slide until it's halfway between two slots and release the clip to lock the l track studs into the slots.
SPECS - Double Stud L Track Fitting With Pear Link | Assembly Break Strength: 5,000 pounds | Working Load Limit: 1,666 pounds | Quantity: 10 L Track Double Stud Fittings
2. Aluminum Track Tiedown Fitting 5,000 lb. Capacity Tiedowns 8-Pack
Feature
This listing is for eight (8) double stud fittings with a RATED CAPACITY* of 5,000 lbs. The W.L.L.** (working load limit) is a 1,666 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track.*RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.
The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward.
Double stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. 1/4" thick steel "O" ring measures 2" in diameter, large enough and plenty strong enough to handle 2 or 3 tiedowns at the same time.
The steel fittings and O-ring are zinc plated to inhibit corrosion.
3. Ancra Aluminum Track Fitting 4,000 lb Capacity w/ Aluminum Keeper, Tiedowns 12-Pack
Feature
This listing is for twelve (12) single stud fittings with a RATED CAPACITY* of 4,000 lbs. -The W.L.L.** (working load limit) is a 2,166 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track.*RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.
The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward.
Single stud refers to the number of "fingers" that it captures when attached to the aluminum track. The base measures 1-3/8" long x 3/4" wide with a 3/16" diameter stainless steel ring that measures 1-3/8" on center.
The fittings' aluminum base and stainless steel ring will not rust. The steel stud/center post is zinc plated to inhibit corrosion.
4. 8MILELAKE Single Stud L-Track Fitting with Round Ring 10 Pack
Feature
Easily mounts and dismounts, The fitting is Spring Loaded to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward.Breaking strength 4,000 lbs; Single Stud with Round Ring Straight Pull 4,000 lbs; 45 Degree angle 3,000 lbs; Side Horizontal Pull 2,000 lbs.
The fittings' aluminum base and stainless steel ring will not rust. The steel stud/center post is zinc plated to inhibit corrosion.
10 Pieces Single Stud Fitting with Stainless Steel Ring are Included
Great for ATV's, motorcycles snowmobiles, cargo, furniture, and much more
5. US Cargo Control Ancra 6 Foot Airline Style L Track Heavy Duty Grade 6351 Aluminum Secure Motorcycles, ATVs, Utility Tractors, Dirt Bikes, and More Use On Pickup Truck, Van, Or Utility Trailer
Feature
VERSATILE - L Track is an extremely versatile cargo track system that allows quick and easy adjustments so you can accommodate lots of different cargo with the same tie down tracks and L track fittings, including single and double stud fittings.HIGH STRENGTH ALUMINUM This high-quality airline track is made with strong and durable grade 6351 aluminum for the most heavy-duty style of L Track available, so you can secure your motorcycles, ATVs, garden tractors, and more with confidence.
NARROW PROFILE - L Track has a narrow profile than E Track making it ideal for pickup truck beds, vans, van trailers, enclosed trailers, and other vehicles where space is tight or limited.
SURFACE OR FLUSH MOUNT This Airline Tie Down Track is suitable for both surface mount and flush mount installations. This flexibility gives the user many choices when deciding where to install their airline track in their truck bed or trailer.
SPECS Ancra 6 Foot L Track Rail | Material: 6351 Aluminum | Color: Unpainted | Length: 72 inches | Width: 1-3/8 inches | Product Weight: 3.15 pounds | Fasteners Not Included | Quantity: 1 Tie Down Track
6. Aluminum Track Tiedown Fitting 6,500 lb Tiedowns 6-Pack - No Ring
Feature
This listing is for twenty (20) triple stud fittings with a RATED CAPACITY* of 6,500 lbs. The W.L.L.** (working load limit) is a 2,166 lb. capacity. This fitting fits all aluminum track that is similar to the track shown in the secondary image above. We refer to the track as aluminum load track. It is also commonly referred to as airplane track, seat or simply S track.*RATED CAPACITY: Also known as assembly capacity or break strength is the minimum load a complete assembly can withstand before failure in a laboratory pull test when the product is new. **W.L.L. The maximum load weight a tie-down should be subjected to during normal use. To assist in making the proper tie-down choice the Federal D.O.T. requires the W.L.L. to be 1/3 of the Rated Capacity.
The fitting is SPRING LOADED to permit simple attach and detach operation. To detach, simply pull up on the spring loaded mechanism and then slide forward or back and the fitting releases. To attach, rest the fitting in the load track, then push down on the base and push forward.
Triple stud refers to the number of "fingers" that it captures when attached to the aluminum track. Base measures 2-1/2" long x 7/8" wide. Opening or eye is large enough to receive TWO standard tiedown hooks.
The steel fittings is zinc plated to inhibit corrosion.
7. Aluminum Load Track Mounting Kit w/Stud Nut, Tiedown 12-Pack
Feature
This listing is for Twelve (12) complete mounting kits. The mounting kit fits all aluminum tracking similar to the track shown in the secondary image.The stud kit can be used to attach virtually any item to the aluminum tracking. Drilling a hole in the item/component you wish to attach is all that is required, allowing you to move the item anywhere along the track.
There are many names associated with the type of track that receives the stud nut fittings. It's the same track used in the airline industry to secure seats in the fuselage and for cargo control. It's known to be called seat track, s-track, airline track, and aluminum load track to name a few.
See the secondary image for dimensions. The fittings' steel components are zinc plated to inhibit corrosion.
QUALITY ASSURED - Customer satisfaction is a priority. If you have any installation or product related questions please ask, we are happy to offer advice.
8. MOTO4U Single Stud Fitting Tie Down Anchor Quick Release Ring Spring Bolt L Track Fitting Airline Track (4Packs)
Feature
Single Stud with Round Ring Straight Pull 4,000 lbs.Provides convenient tie off locations
Works with a wide variety of hooks, snaps, and straps.
Material : Manufactured with a stainless steel ring and plastic base black color holder finish to resist rust and corrosion
Package Includes: 4pc Single stud fitting
9. CYC 5001, Double Stud Fitting with O-Ring. Application for Logistic Installation and L-Track Uses(2-Pack)
Feature
Double Stud Fitting with O-RingBreaking Strength: 2300 kg
Finish: Zinc
Application for fastening to L Track System
Quantity: 2 Pack
10. MNJ Motor 10PCS Steel E-Track O Ring Tie-Down Anchors for E-Track Tie Down System, Secure Cargo in Enclosed/Flatbed Trailers Van Trucks (ETrack Rails Not Included)
Feature
Multi Use : MNJ MOTOR O ring tie-down anchor can connect belts, elastic ropes, chains to fix furniture, equipment, motorcycles, goods and other heavy objects, making transportation safer and better protect the transported itemsHigh Load Strength : The load limit of the tie down anchor is 2000 pounds, the safe working load limit is 2500 pounds, and the assembly break strength is 3000 pounds
Strong and Durable : Made of high-quality steel, which has excellent wear and damage resistance, very durable. Zinc coating on the surface to prevent corrosion and rust
Simple to Use : Installation is very simple, just need to directly snap it to the E-track, cooperate with the E track can easily move on the track position. Unlike many other E-track accessory, our anchors are designed with spring-loaded fittings to perfection fit in the slot of E-track rail. This allows you to use it on different vertical or horizontal E-track(E-track not included) quickly without much effort. Then enjoy stress free time with no more worries about your cargo.
Wide Application : You can place the anchors in different locations to fix goods according to needs, widely used in vans, trailers, trucks, etc
Recent Comments