Best grinding vise

If you looking for grinding vise then you are right place. We are searching for the best grinding vise on the market and analyze these products to provide you the best choice.

Best grinding vise

Product	Features	Editor's score	Go to site
	HFS (R) 2" PRECISION GRINDING SCREWLESS MINI INSERT VISE TOOLMAKER STEEL .0002"		Go to amazon.com
	HFS (R) Precision Toolmakers Vise 2-1/2" NEW ; V-GROOVE, 0.0002",		Go to amazon.com
	3'' Screwless Toolmaker Grinding Ground Vise .0002 Steel Tool Making Vise		Go to amazon.com
	AccusizeTools - Mini Precision Toolmakers Insert Vises, GA41-0050		Go to amazon.com
	HFS (R) 1" PRECISION GRINDING SCREWLESS MINI INSERT VISE TOOLMAKER STEEL .0002"		Go to amazon.com
	Starrett 581 Hardened Steel Precision Grinding Vise With T-Handle Wrench, 4" Jaw Opening, 1-1/4" Jaw Depth		Go to amazon.com
	3'' Screwless Toolmaker Grinding Ground Vise .0002 Steel Tool Making Vise		Go to amazon.com
	Mini Toolmaker's Vise, 1-1/4 Inch Capacity		Go to amazon.com
	HHIP 3900-2003 Ultra Precision Toolmaker's Vise, 3" Jaw Width (Pack of 1)		Go to amazon.com
	PROLINEMAX 1'' Precision Grinding Screwless Mini Insert Vise Toolmaker Steel .0002''		Go to amazon.com

Related posts:

1. HFS (R) 2" PRECISION GRINDING SCREWLESS MINI INSERT VISE TOOLMAKER STEEL .0002"

Feature

Jaw Width 2"; Jaw Depth 1-1/4"
Jaw Opening 3"; Length 6"
Oil hardened
Precision Ground

Description

Oil hardened. Precision Ground. Rapid positioning notches. .00025" square and parallel

2. HFS (R) Precision Toolmakers Vise 2-1/2" NEW ; V-GROOVE, 0.0002",

Feature

All surfaces are hardened and precision ground square and parallel to accuracy of +/- 0002-inches
Clamping slots are provided and jaws are easily replaced
Ground "V" ,holding of square and round parts, vertically and horizontally
2.5-inches jaw opening
Jaw measures 2-inches width by 1-inches depth

Description

All surfaces are hardened and precision ground square and parallel to accuracy of +/- 0002-inches. Clamping slots are provided and jaws are easily replaced. Ground "V" way. 2.5-inches jaw opening. Jaw measures 2-inches width by 1-inches depth.

3. 3'' Screwless Toolmaker Grinding Ground Vise .0002 Steel Tool Making Vise

Feature

Tool Making Precision Grinding Vise
Jaw Width: 3";Jaw Opening: 4";Jaw Depth: 1-3/8"; Angular Center Channel Provides Extra Jaw Capacity
Vise is ground flat;Square and parallel within .0002";V-groove at movable jaw
Jaw can be Opened and Closed without Unbolting vise from Work Surface
Quantity: 1;Overall dimension: 3''L x 7-1/2''W x 3''H;Weight: 8.80 lbs

Description

End Pockets for Convenient Clamping in All Models

4. AccusizeTools - Mini Precision Toolmakers Insert Vises, GA41-0050

Feature

Also used in large vises
APPROXIMATE DIMENSIONS: Jaw Width - 15/16"
Jaw Opening - 1/2"
Weight - 11oz.
Jaw Depth - 4/10", Length - 2-1/2"

5. HFS (R) 1" PRECISION GRINDING SCREWLESS MINI INSERT VISE TOOLMAKER STEEL .0002"

Feature

Jaw Width 1"; Jaw Depth 3/8" ; Jaw Opening 7/8"; Over Length 2-5/8"
Oil hardened
Precision Ground
Size : Length: 2-5/8" width: 1" Height: 1.14"

Description

Oil hardened. Precision Ground. Rapid positioning notches. .00025" square and parallel width: 1 " Jaw Depth: 0.36" or 3/8"

6. Starrett 581 Hardened Steel Precision Grinding Vise With T-Handle Wrench, 4" Jaw Opening, 1-1/4" Jaw Depth

Feature

Extremely useful for accurate grinding
Hardened steel construction
Ground flat, square, and parallel within 0.0002"
Jaw pressure on workpiece is forward and downward for repeatable positioning and maximum holding power
Movable jaw is slightly narrower than the base, enabling the vise to be used on its side

Description

1/4-20 tapped hole in each side of the solid jaw to allow the use of a stop for repetitive operations. T-handle wrench provided for tightening the movable jaw. Four drilled and counterbored holes for 5/16 bolts in the base of the vise for bolting to a sine plate or the bed of a machine tool. For attaching special jaw plates, two holes are drilled in both the solid and movable jaws.

7. 3'' Screwless Toolmaker Grinding Ground Vise .0002 Steel Tool Making Vise

Feature

Tool making precision grinding vise
Jaw Width: 3" ; Jaw Opening: 4" ; Jaw Depth: 1-3/8"
Vise is ground flat; Square and parallel within .0002"
V-groove at movable jaw; Jaw can be Opened and Closed without Unbolting vise from Work Surface
Quantity: 1

8. Mini Toolmaker's Vise, 1-1/4 Inch Capacity

Feature

1-7/16 inch wide x 7/8 inch deep jaws
Cast and ground tool steel
Stands flat on base
Heavy-duty
Weighs 1-1/2 lbs

Description

Mini Toolmaker's Vise Holds Tight For Drill Press Work Machinists and toolmakers always lock their work in a vise. Our vise is cast and ground tool steel. Stands flat on base or side and has vertical and horizontal V grooves in one jaw face for holding round stock. A heavy-duty, well made tool for a lifetime of use. Weighs over 1-1/2 lbs. with 1-7/16 inch wide x 7/8 inch deep jaws. 1-1/4 inch capacity.

9. HHIP 3900-2003 Ultra Precision Toolmaker's Vise, 3" Jaw Width (Pack of 1)

Feature

Vise bed scraped ways
Vees in sliding jaws
Hardened and precision ground, solid one piece construction
The "no-rise" jaw construction exerts a continual downward pressure to the jaw, eliminating tilting and lifting
Jaw can be opened and closed without unbolting from work surface

Description

HHIP Ultra precision toolmaker's vise. Vise bed scraped ways. Vees in sliding jaws. Hardness: 50-55 HRC. Hardened and precision ground, solid one piece construction. The "no-rise" jaw construction exerts a continual downward pressure to the jaw, eliminating tilting and lifting. Jaw can be opened and closed without unbolting from work surface. Square and parallel 0.0002".

10. PROLINEMAX 1'' Precision Grinding Screwless Mini Insert Vise Toolmaker Steel .0002''

Feature

1'' mini insert toolmaker vise; Vise height: 1-1/8"
Jaw width: 1"; Base hardened and ground
Jaw opening: 13/16" maximum; Squareness and parallelism to within .0002"
Jaw depth: 3/8"; Overall dimension: 2-1/2''L x 1''W x 1-1/8''H
Vise length: 2-1/2"; Weight: 8 ounce

Description

• 1'' mini insert toolmaker vise
  
• Jaw width: 1"
  
• Jaw opening: 13/16" maximum
  
• Jaw depth: 3/8"
  
• Vise length: 2-1/2"
  
• Vise height: 1-1/8"
  
• Base hardened and ground
  
• Squareness and parallelism to within .0002"
  
• Overall dimension: 2-1/2''L x 1''W x 1-1/8''H
  
• Weight: 8 ounce
  

Conclusion

All above are our suggestions for grinding vise. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using grinding vise with us by comment in this post. Thank you!