Best hf power swr meter to buy in 2019
We spent many hours on research to finding hf power swr meter, reading product features, product specifications for this guide. For those of you who wish to the best hf power swr meter, you should not miss this article. hf power swr meter coming in a variety of types but also different price range. The following is the top 10 hf power swr meter by our suggestions:
Best hf power swr meter
1. Astatic (302-PDC2) SWR/RF/Field Strength Test Meter , Black
Feature
3 functions: tests for SWR, RF power and field strengthDesigned to test any 50 ohm antenna and antenna coax used for CB operation
Mounting bracket and hardware included
Description
Designed to indicate the condition of any 50 ohm antenna and coax for cbs. 10 watts and 100 watts switches, forward and reverse switches.2. RF Power & SWR meter for 1.8-525Mhz - HF / VHF / UHF 200W
Feature
For Amateur / Ham Radio, Commercial, Marine, AIR & CB Two-Way Radios.Reads Power & SWR up to 200 Watts. 5 Watt, 20 or 200W power ranges.
Frequency Range of 1.8 to 525Mhz covers, HF, VHF & UHF!
Average/P.E.P Select. SO-239 Connecters for input.
Meter Illuminates if Optional 12Vdc is connected.
Description
Power SWR meter for Radio transceivers.* Has large 3.25x1.25 inch precision illuminated meter for easy wide-angle viewing.
* A highly visible black and red meter scale on a bright white background makes it quick and easy to read SWR, forward or reflected power!
* Meter lamp requires Optional 13.8 VDC. Power pigtail included for wiring.
* A functional and simple front panel layout lets you select power ranges, bands or make SWR readings intuitively.
* This GrandMaster series meter feature an SWR scale that expands the full view of the meter, 3:1 SWR is centered at mid-scale to give you precision and wide-range measurements.
* Features peak and average, forward and reflected power readings and has selectable power ranges.
* Housed in an all metal cabinet, with rubber feet and protected by durable speckled black paint.
* A designer injection molded grey front panel perfectly matches any transceiver.
* Air dielectric SO-239 connectors with gold plated center pins gives superb performance to beyond 525MHz.
* Precisely factory calibrated for accurate measurements.
* Covers HF/UHF/VHF (1.8 - 525 MHz).
5, 20, 200 Watt power ranges.
3. MFJ-822 SWR Meter, 1.8-200Hz, 30/300W
Feature
Has huge 3" Cross-needle meter.Read forward/reflected power and SWR simultaneously.
Compact HF/VHF SWR/Wattmeter.
covers 1.8-200 MHz, 30 or 300 Watts.
SO-239 Connectors.on back
Description
MFJ-822 HF/VHF 300 Watt Cross Needle SWR/Wattmeter Specifications: * Compact HF/VHF SWR/Wattmeter. * Has huge 3" Cross-needle meter. * Read forward/reflected power and SWR simultaneously. * Perfect for mobile or portable operation. * Two selectable power ranges * Built-in Meter Light (+12 VDC Required) * SO-239 Connectors. * Dimensions: 3 1/4 W x 3 1/4 H x 3 1/4 D inches. * MFJ-822 covers 1.8-200 MHz, 30 or 300 Watts.4. HF Band Two Way Radio Digital Power & SWR Meter RED DOT 1.6~60 mhz 2017A 199W
Feature
MAX.POWER 199W; V.S.W.R 1.00~19.9; Frequency Range:HF 1.6MHZ~60MHZSampling rate: 100/S; Sampling to distinguish: 12BIT (Oversampling); RF connector: N-KF(L16)
ONSERTION LOSS < 0.15dB(VHF) , < 0.25dB(UHF); Return Loss: >30db; Directional: >30db(VHF), >26db(UHF)
Description
The latest model 2017A HF VSWR Power Meter adopts sampling techniques, the A / D converter effective resolution arrives to 12bits.It remains easy operation and many other practical features.The RF connector is the most commonly used in HF band called M-KF (also known as SO239 UHF, SL16, etc.)
Technical Specification:
*Maximum Power: 199 W
*VSWR:1.00~19.9
*Frequency Range:HF 1.6MHZ~60MHZ
*LCD Screen:3 1/2 LCD
*RF connector:UHF-KF (SL16,SO239,M)
*Insert Loss: <0.2db
*Reflection Loss:>30db
*Directionalness >30db
*Working TemperatureL 0~70
*Power supply: AAA*3
*Power assumption: <3mA(Backlight OFF)
<10mA(Backlight ON)
*Size: 66*68*37mmExcluding protrusions
*Net Weight<400g
5. Youmei RS-70 Digital SWR/Watt Meter HF 1.6-60MHz 200W for Two-Way Radio
Feature
Forward/Reflected/VSWR ration in one push buttonLCD backlight display for easy reading
Convenient control layout for easy operation
Powered by two AAA batteries/rechargeable batteries or external USB port
Low insertion loss(0.3dB or lower) structure allows it to be connected permanently
Description
Specifications:
Frequency range: 1.6-60 Mhz
Power range:0-200W +/- 5%
Impedance: 50 ohm
Connector: M-J(So-239 (M))
Dimension: 70W x 78H x 30D mm
Net Weight: 220g
Measurement:
1. Apply output of transceiver to "TX" and antenna or load to "ANT".
2. "POWER" on for ready to use.
3. LCD display show simultaneously "Fwd/Ref Power and SWR".
4. For back-light, please switch "LIGHT" to "ON".
5. No function in 30 seconds, the backlight will automatically off.
6. Once PTT launched, the backlight will be back.
Battery installation:
1. Remove the black screw from the cover to open the rear panel.
2. Install 2 pcs "AAA" batteries.
3. Can be used with alkaline or Ni-Ca, Ni-MH rechargeable battery.
4. This unit has no built-in charging circuitry.
5. Be sure to correct polarity of battery.
6. Remove the battery if the unit won't be used in long period.
Packages includes:
1 x SWR/Power Meter(no batteries)
6. NISSEl RS-70 Digital SWR & Power Meter 1.6-60 Mhz HF 200W For 2 Way Radios
Feature
1.Forward/Reversed/VSWR ration in one push button.2.LED backlight display for easy reading.
3.Powered by AAA batteries/ external USB port. 4.Applicable rechargeable battery.
5.Micro USB-DC 5V output (not include adapter).
6.Convenient control layout for ease operation.
Description
Frequency range: 1.6-60 MhzPower range:0-200W +/- 5%
Testing functions: Fwd/Rev Power, SWR
Insertion loss: 0.3dB or lower
Impedance: 50 ohm
Power source: battery "AAA" or Micro USB port
Connector: "M" type or "N" type (we will send M connector for default, please contact us if you need N connector)
Dimension: 70W x 78H x 30D mm
Net Weight: 220g (no batteries)
Measurement:
1, Apply output of transceiver to "TX" and antenna or load to "ANT".
2."POWER" on for ready to use.
3.LCD display show simultaneously "Fwd/Rev Power and SWR".
4.For back-light, please switch "LIGHT" to "ON".
No function in 30 seconds, the backlight will automatically off.
Once PTT launched, the backlight will be back.
Battery installation:
1.Remove the black screw from the cover to open the rear panel.
2.Install 2 pcs "AAA" batteries.
3.Can be used with alkaline or Ni-Ca, Ni-MH rechargeable battery.
4.This unit has no built-in charging circuitry.
5.Be sure to correct polarity of battery.
6.Remove the battery if the unit won't be used in long period.
Package includes: 1x RS-70
7. MFJ-815D MFJ-815 Original MFJ Enterprises HF + 6M Peak Reading SWR/Wattmeter
Feature
Covers 1.8-60MHzLED Backlighted lamp
Large 3" Cross-Needle Meter
True Active Peak Reading Circuit
All metal black aluminum cabinet measures 6W x 3 1/2H x 4 1/2D inches.
Description
MFJ-815D reads true-peak or average power on a large illuminated three-inch Cross-Needle Meter. Its TrueActive peak reading circuit gives you an incredibly accurate SWR and power reading in SSB and CWover a wide frequency range. The Cross-Needle Meter reads SWR and true peak average, forward and reflected power simultaneously -- all in a single glance. You get Frequency coverage from 1.8 to 60 MHz. Has mechanical adjustment for accurately zeroing the meter. Push button selects range, meter lamp on/off and peak for SSB or average for CW operation. SO-239 Connectors. MFJ-815D has 3000 and 300 Watts forward and 600/60 Watts reflected power ranges. Read SWR from 1:1 to 8:1. LED Meter lamp uses 12 VDC or 110 VAC with optional MFJ-1312D TrueActive Peak Reading Circuit can use 9 Volt battery.8. Tenq Rs-50 Digital Power SWR Meter SWR Meter 125-525mhz
Feature
Connect the Output of your transceiver to "TX" and Antenna or Load to "ANT". NOTE: UV-Band meter utilize "N" type connectors; and"SL16" connectors (normally named "M" connecter) for HF-Band. Proper adaptor/cable is required if your device has different type of connectors.Press the red button to power on. After 2 seconds of LCD self test, it''s ready for normal measurement.
UV-Band meter will display in sequence:"+ XXX P" (pass through power),"- XXX P" (feed back power)," XXX " (SWR value), 2 seconds display for each mode. Press the red button will hold the current display. Press it again to continue the display.
Under the environment of night or weak illumination, just press and hold the red button for 1 second to turn the blue back light on. Press and hold the red button for 1 second again to turn it off.
8 minutes after no power was measured, it will power off automatically. Press and hold the red button for 2 seconds to turn off manually.
Description
Features:100% brand new, high qualtiy
Brand: TENQ Y004 Digital VHF/UHF Power & SWR Meter
100% new, factory packed and never been used.
Specification:
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Frequency range: 125 - 525MHz
Measurable power range: 0 - 120W
Maximum power: 120W Accuracy: mean + / - 5%
Impedance: 50
Size: 70 WX 78 H X 30 D mm.
Interface: M-J Interface
Weight:249g
Package Includes:
1x Digital VHF/UHF Power & SWR Meter 1x TENQ Hand Strap
If you can't make sure this Power SWR Meter can work on your two way Radio,
please contact "TENQ" and tell us Brand and model of your two way Radio.
* TENQ --- Focus on Two Way Radio Accessories. TENQ is a Registered brand.
Welcome wholesale Walkie talkie Accessories - Earpiece/Headset/Speaker/Battery/case/Programming cable/Antenna From TENQ.
9. MFJ-813 HF QRP SWR/Wattmeter
Feature
Great tool for working on your QRP radios1.8 to 50Mhz
Rugged black aluminum case
SO-239 UHF connectors
4-1/2in W x 2-1/4in H x 3in D
Description
Read forward power and reflected power from 0-5 Watts on a calibrated meter scale - plus read SWR and relative power at any power level from 100mW to 50 Watts. Bruene-style bridge circuit detects both RF current and RF voltage to ensure uniform accuracy across a wide range of load impedance's, operating frequencies, and power levels10. Hemobllo Multi Function External Power Meter External for SWR Ham Radio HF/VHF/UHF Radio
Feature
Easy to use: you just need to connect it with your SWR, our product don't need any extera connect except a cable connect with your SWR.Portable: you can put it into your bag, luggage or someplace can put it when you need go to somewhere. Because this wave ratio meter really don't need too much place.
Design for Car use: It can stand near your Short Wave Radio because it have support part can stand up steady.
Size: 12 x 9 x 7cm.
Color: As Shown. - Material: Plastic.
Description
DescriptionThis Wave Ratio Meter work with Yaesu FT-857/FT-897 Short Wave Radio. Can monitor your radio transceiver real time without computer or another device. Also this Ratio meter are portable, you can use your FT-857/FT-897 on your car with this wave ratio meter.
Feature
- Color: As Shown.
- Material: Plastic.
- Size: 12 x 9 x 7cm.
- Easy to use: you just need to connect it with your SWR, our product don't need any extera connect except a cable connect with your SWR.
- Portable: you can put it into your bag, luggage or someplace can put it when you need go to somewhere. Because this wave ratio meter really don't need too much place.
- Design for Car use: It can stand near your Short Wave Radio because it have support part can stand up steady.
Package Including
1 x Wave Ratio Meter
Recent Comments