10 best holdfast clamps for 2022
It’s not that easy to choose the right holdfast clamps since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top holdfast clamps on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best holdfast clamps on the marketbut dont skip to the end!
Best holdfast clamps
1. Sjbergs 3/4 Inch ST11 Holdfast for Clamping on Sjbergs Workbenches, SJO-33639
Feature
Fits any workbench with 3/4 (19mm) bench dog holes, made for use with Sjbergs Scandi Plus workbenchesMade from heavy duty steel
Perfect for horizontal clamping
Fits Sjobergs Scandi Plus, Nordic Plus, Junior seniors workbenches
2. Sjobergs SJO-33635 Elite 1-Inch Holdfast
Feature
Clamping toolWorks with Sjoberg Elite benches
Easy to use
Quick-acting; Use any dog or trestle hole
One piece, weighs 3.8 pounds
3. DCT 8in Work Bench Holdfast Woodworking Hold-Down Clamp 4in Reach, 5/8in Shaft for Wood Carving, Routing, Sanding
Feature
QUICK AND EASY CLAMPING: Use this DCT Holdfast on your workbench to quickly shift and adjust your woodworking stock with its quick clamping and quick release designUSE ON YOUR WORK BENCH: 8-inch (20.3cm) clamp has a 4-inch (10.2cm) reach and 5/8-inch (17mm) shaft diameter to use with any bench thickness from 2.5 inches (6.4cm) and up
VARIOUS APPLICATIONS: For applications where you need to consistently shift your workpiece; Carving, routing, sanding, finishing, and general woodworking jobs; Rough stem and uniquely hooked profile offers a strong hold on difficult workpieces
EASY TO USE: Drill a vertical 3/4-inch (1.9cm) hole in your workbench top to accommodate the holdfast and drop it in place, when arm contacts top of your stock board, give holdfast head above the top of round shaft a firm tap with a wooden mallet or rubber hammer until it jams tightly in the hole to hold your work firmly; When you are ready to disengage your work from the clamp, tap the backside of the vertical shaft of the holdfast opposite the arm to unjam from the hole and release your work
HELPFUL TIPS: Holdfast will not hold if it is too loose in the dog hole or if your bench top is not thicker than 2.5 inches (6.4cm); If you extend the holdfast too high in an effort to hold something that is out of its working range, it will not be able to develop enough of a bind in the dog hole and will be loose; We suggest using a scrap of wood as a pad between the holdfast and the workpiece so the holdfast can be tapped hard without damaging your stock
4. Eagle America 453-0108 8-Inch Bench Holdfast with 4 Reach
Feature
Quick and Easy ClampingUse in Workbench
Heavy Duty
Made in the USA
5. Fulton Work Bench Holdfast, 8-Inch Long with 3-1/2 Inch Reach and 11/16 Inch Dia.
Feature
Made from solid ductile iron for extended shop use3" reach, 8 " in overall length with an 11/16" diameter shank
Firmly tap the top of the Holdfast with a mallet to secure and tap backside with a mallet to quickly release the clamp
Works in 3/4" holes and sets up in seconds
Quickly make adjustments to your stock
6. Bundle 2 Each Pair Workbench Holdfasts Bench Clamps Ductile Cast Iron 8 Tall 4.25 Reach Use in 3/4" Holes WBHFx2
Feature
Pair, set of 2 each holdfastsUsed to secure boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc.
8 tall, 4.25 reach and 11/16 diameter shaft
Used in 3/4" holes in benchs at least 2 thick
Cast from ductile cast iron
7. Woodworking Hold Fast Hold Down Bench dog clamp for 3/4 dog hole(5/8" diameter shaft) (one single holdfast)
Feature
Hand forged American steel5/8" diameter shaft for 3/4" dog holes
Approximately 10" shaft
Approx. 5" reach
Please email for questions or any issues
8. Craftsman Tool Auto-Adjust Hold Down Peg Clamp Horizontal Dog
Feature
The clamp automatically adjusts to variations in workpiece dimensions while maintaining clamping pressureThe adjustable clamping force adjustment screw is used to adjust a wide range of clamping pressures from very light to heavy
Pivoting spindle adapts to variations in workpiece shape and the reach can be fine tuned
Large soft-grip horizontal handle features soft insets for grip and comfort
9. Workbench Holdfast Bench Clamp Ductile Cast Iron 8 Tall 4.25 Reach Use in 3/4" Holes WBHF
Feature
Used to secure boards to the top and side of workbenchs to allow hands-free planning, carving, drilling, sawing, routing, etc.8 tall, 4.25 reach and 11/16 diameter shaft,
Used in 3/4" holes in benchs at least 2 thick
Cast from ductile cast iron
To use, insert in 3/4" hole, hit with mallet in center of head, tap back side to release
10. Fulton Work Bench Holdfast,16-1/2 inch Long with 7-Inch Reach and 7/8 Inch Diameter
Feature
Made from solid ductile iron for extended shop use7" reach, 16-1/2" in overall length with a 7/8" diameter shank
Firmly tap the top of the Holdfast with a mallet to secure and tap backside with a mallet to quickly release the clamp
Works in 15/16" holes and sets up in seconds
Quickly clamp your stock to your bench for maximum holding power
Recent Comments