10 best mobile miter saw stand for 2020
It took days of going through more than a thousand customer reviews and conducting expert researches to narrow down the list. Weve included a comparison table below to give you a quick summary of our top 10 mobile miter saw stand. Its followed by an in-depth review of each mobile miter saw stand. Hopefully, once you are done reading this article, you will be well informed about mobile miter saw stand and be able to select the right mobile miter saw stand for you without any hesitations.
Best mobile miter saw stand
1. BOSCH Portable Gravity-Rise Wheeled Miter Saw Stand T4B
2. POWERTEC MT4000 Deluxe Portable Miter Saw Stand with Wheels
Feature
Innovative mobile saw stand, constructed with round steel tubingSupports up to 330lbs. 8-Inch rubber wheels for easy transport
Accommodates most 10" and 12" miter saws. Support arms extend to 79-1/4-Inch, retract to 46-Inch
Spring-loaded locking legs for easy set-up and break down. Universal quick-release mounting brackets included
Two 11-1/2" steel rollers insure a smooth feed
Description
The POWERTEC MT4000 Deluxe Miter Saw Stand with Wheels and 110V Power Outlet is the ultimate portable saw workstation. The stand is constructed with steel tubing and locking steel legs which provides a weight capacity up to 330 lbs. Miter saws, and other bench top saws and planers can be easily secured and removed with quick-dash release universal mounts. Two adjustable steel rollers support your work piece along the stand length smoothly and accurately. Useful flip- down supports for lumber or material storage offer easy accessibility to work materials. The stand also includes a convenient 3-outlet power strip which makes being near an electric outlet unnecessary. For stability, the leveling feet are adjustable for uneven surfaces. For ease of mobility, this stand comes with two 8-inch rubber wheels; just roll the stand to your preferred location (and work away). Height: 32-1/4" (819 mm); Extended Width: 79-1/4" (2013 mm): Maximum Load Capacity: 330 lbs. (150 kg); Outlet Input Voltage: 125V AC; Input Ampere: 15 Amps; Net Weight: 40 lbs. (18 kg); Gross Weight: 42 lbs. (19 kg).3. WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets
Feature
Universal design fits nearly every miter saw on the market, including all WEN miter sawsCollapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage
Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground
Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long
Includes three onboard 15A 120V outlets, two height adjustable rollers, quick-release brackets, two table extensions, a powder-coated finish and a two-year warranty
Description
Remember when you could adequately support both your miter saw and your workpiece? With the WEN Collapsible Rolling Miter Saw Stand, youll have a sturdy and reliable support system for all your sawing needs. Three pre-mounted 120V outlets provide you up to 15 amps of power, meeting the needs of saws and tools of all sizes. Two 8-inch never flat wheels combine with foldable design for a safe and easy transportation and storage solution. The sliding arms extend anywhere from 32 to 79 inches in width, providing support for boards up to 10.5 feet long. Quick-release brackets tightly lock the miter saw in place for simple installation and adjustments. The 1-1/2-inch-diameter steel frame provides over 330 pounds of support to your saw and materials while the powder-coated finish prevents corrosion and marring to the stands body. Adjust the height of the detachable rollers to best match the specific requirements of your project. Both rollers also operate as work stops, helping make consistent and even cuts every time. The universal design allows for compatibility with the majority of miter saws on the market, including the entire WEN miter saw series. If you want to know whether or not your particular miter saw will fit onto the WEN Rolling Miter Saw Stand, simply measure the distance between the front and back mounting holes. If this distance is less than 15 inches and on a centerline, the stand will fit. And because its a WEN product, your miter saw stand comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.4. PROTOCOL Equipment Contractor Miter Saw Workstation, Universal Mount, Durable Steel Construction, Foldable Legs for Portability, Adjustable Width, Supports 500 lbs.
Feature
PORTABLE WORKSTATION - Portable wheeled workstation with adjustable tool mount brackets and extendable material supportsPROFESSIONAL GRADE STRENGTH - Made of high-grade steel that can support up to 500lb of materials so you can tackle big jobs faster
UNIVERSAL MOUNT - Adjustable tool mount brackets have six inch handles and work with most brands of miter saws
2 MATERIAL SUPPORTS - 2 adjustable material supports each feature an end stop to make quick work of repeat cuts
FOLDING LEGS - Folding legs have quick-release levers for easy setup and take-down and on one side feature fold-down material storage brackets
ADJUSTABLE TOP WIDTH - Infeed and outfeed material supports adjust from a compact 35-inches to a maximum of 77-inches
CAPPED FEET - Capped feet on each support leg allow use on finished surfaces without damaging them
Description
Youre all about earning sweat equity, but to be efficient on the job, you need equipment that will work as hard as you. Good thing the PROTOCOL Equipment WS-077 Contractor Miter Saw Workstation always outperforms its competitors. Constructed of high-grade and corrosion-resistant, powder-coated steel, this stand has a 500 pound weight capacity and the adjustable tool mount brackets work with most brands of miter saws and other bench-top tools. The tool mounts have a sliding rail that lets you adjust the center of gravity of any mounted tool and create a steady foundation while cutting. The tubular, powder-coated steel legs are capped for use on finished surfaces and have quick-release levers for easy setup and take-down. One pair of legs feature fold-down storage brackets that can hold a variety of builder materials. The top width adjusts from 35-inches to 77-inches, allowing for an extensive workload. There's a convenient carrying handle and sturdy wheels that make transporting this workstation effortless.PROTOCOL tools are designed to exceed the requirements of entry-level pro contractors and DIY customers shopping in select retailers.
5. DEWALT Miter Saw Stand With Wheels (DWX726), Yellow
Feature
Wide adjustable infeed and outfeed work supports provide up to 8' of material supportEasily adjustable mounting rails adapt to nearly any miter saw
Wide rubber grip wheels provide easy jobsite mobility
Three-position pneumatic assisted raising and lowering for the ultimate in flexibility and ease of set up
Durable tubular steel construction allows for a 300-Pound maximum weight capacity
6. DEWALT Table Saw Stand, Mobile/Rolling (DW7440RS)
Feature
Lightweight design weighs only 33lbs. delivers 20% less weight to carry than other competitive mobile standsHeavy-duty kickstand allows the stand to balance upright for mobility and storage
Quick connect stand brackets attach to saw for easy detachment from stand for loading and unloading
Wide stand base and offset rear legs provide stability and support for material feed control
Folding legs with quick release levers collapse under the stand, minimizing overall size for transport.
7. DEWALT Miter Saw Stand, Heavy Duty (DWX723)
Feature
Universal design works with all brands of miter saws. Extended Tool Width 151 inch. Folded Tool Width 70 inch. Folded Tool Height 6 inchLightweight aluminum construction (35pounds.) allows for easy transport to and from the jobsite
5 1/2 Inch beam extends to support up to 16 Feet of material and up to 500 pounds
Miter saw mounting brackets allow easy and secure mounting of miter saw to stand
Non marring feet on tool mount will not scratch material.Extended Tool Height:32 inch
8. DEWALT Miter Saw Stand, Compact (DWX724), Silver
Feature
Universal design works with all brands of miter sawsCompact design allows easy transport and storage.
Lightweight aluminum construction (29.8 lbs.) allows for easy transport to and from the jobsite
40-Inch beam extends to support up to 10 feet of material and up to 500 lbs.
Legs provide superior support and fold for easy storage. Extended Tool Height 32 inches,Extended Tool Width 100 inches,Folded Tool Height 8 inches,Folded Tool Width 44 inches
Tool mounting brackets allow easy and secure mounting of miter saw to stand
9. Makita WST05 Miter Saw Stand
Feature
Compact design (46" folded) for convenient transportation to and from the jobsite and easy vertical or horizontal storage2-Position adjustable stand provides additional height set up for increased comfort
"Tool-less" adjustable miter saw bracket holders for easier installation/removal of saw
Weighs only 58 lbs
Fits all Makita miter saws
10. WEN MSA658 Multi-Purpose Rolling Planer and Miter Saw Tool Stand with Extension Rollers
Feature
Adjustable rollers expand up to 54. 3 inches for additional workpiece supportMetal top provides a reusable work surface that requires no drilling unlike MDF alternatives
Retractable swivel caster quickly turns the stand from stationary to mobile
Compatible with the majority of saws and planers on the market
Designed to support any WEN Benchtop Planer or Miter Saw
Recent Comments