Best oxyacetylene welding

If you looking for oxyacetylene welding then you are right place. We are searching for the best oxyacetylene welding on the market and analyze these products to provide you the best choice.

Best oxyacetylene welding

Product	Features	Editor's score	Go to site
	Coxreels 112WL-1-100 Welding Hand Crank Hose Reel: 1/4" I.D, 100' twin oxy-acetylene welding hose capacity, less hose, 200 PSI		Go to amazon.com
	Oxygen Regulator Low Pressure for Oxy-Acetylene Welding		Go to amazon.com
	Thoroughbred GasPony1 Portable Welding/Cutting Torch Outfit, Model# TB-GP1		Go to amazon.com
	Welder's Handbook: A Guide to Plasma Cutting, Oxyacetylene, ARC, MIG and TIG Welding, Revised and Updated		Go to amazon.com
	Basic Oxyacetylene Welding		Go to amazon.com
	Cast Iron Oxy-Acetylene Welding Rod		Go to amazon.com
	Hot Max 24076 Medium Duty Victor Style Gas Heating Tip/Nozzle for Oxy-Acetylene, Size 0 (0-W-1)		Go to amazon.com
	SA - Oxygen and Acetylene Regulators Welding Gas Gauges -Pair - Rear Entry - LDP series		Go to amazon.com

Related posts:

1. Coxreels 112WL-1-100 Welding Hand Crank Hose Reel: 1/4" I.D, 100' twin oxy-acetylene welding hose capacity, less hose, 200 PSI

Feature

Manual rewind for hand crank action
Steel for strength and durability with 2-point axle support for stability during operation
Brake assembly for braking or locking drum at desired length
Nitrile swivel seals for durability and resistance to oils
Temperature range of -20 to +225 degrees F

Description

Industrial-grade manual rewind oxyacetylene hose reel handles a twin line, 100ft. x 1/4in. long hose (hose not included). Working pressure of 200 PSI. Finish Type: Powder-coat, Hose Diameter (in.): 1/4, Material: Steel, Hose Type: Oxy-acectylene, Brake Type: Adjustable tension brake, Mount Type: Wall, floor, ceiling, bench, vehicle, Operating PSI: 200, Product Type: Welding hose reel, Wheel Width (in.): 8, Color: Blue, Hose Fitting Size (in. NPT): 9/16-18 UNF welding, Hose Included: No, Hose Length (ft.): 100, Stores/Maintains Hose (ft.)(in.): 100 x 1/4, Dimensions L x W x H (in.): 18 3/4 x 12 x 13 1/4, Bearing Type: Composite bearings

2. Oxygen Regulator Low Pressure for Oxy-Acetylene Welding

Feature

Stable line pressure regardless of bottle pressure
Copper-Nickel filter protects high pressure seat
Reinforced laminated neoprene diaphragm
Auto reset relief valve
3 year warranty

Description

These regulators are manufactured using the latest technology. Dual diaphragm assures stable line pressures. Filtered high pressure seat does away with Decay-Rise.

3. Thoroughbred GasPony1 Portable Welding/Cutting Torch Outfit, Model# TB-GP1

Feature

Victor -style torch
Flint lighter
Shade 5 goggles

Description

GasPony 1 gives you an all-in-one package with everything you need for medium-duty welding, torching and brazing projects (except the gas). The 10 cu. ft. acetylene and 20 cu. ft. oxygen Thoroughbred cylinders can be exchanged at over 1300 locations, then you'll be ready to weld mild steel up to 5/16in. and cut up to 1/2in. Complete outfit stores in an easy-carry tote. Product Type: Torch kit, Works With: Oxygen/Acetylene, Tool Length (in.): 9 in. torch handle; 7 1/2 in. cutting attachment (16 1/2 in. total), Single, Pair, or System: System, Welds Up To (in.): 5/16, Typical Application: Welding/cutting, Cuts Up To (in.): 1/2, Tip Type: Acetylene, Degree of Angle ( deg ): 90, Regulator Included: Yes (oxygen, acetylene), Hose Length (ft.): 12 1/2 twin hose

4. Welder's Handbook: A Guide to Plasma Cutting, Oxyacetylene, ARC, MIG and TIG Welding, Revised and Updated

Description

A newly-updated, state-of-the-art guide to MIG and TIG arc welding technology.

Written by a noted authority in the field, this revised edition of HP's bestselling automotive book-for over 20 years-is a detailed, instructional manual on the theory, technique, equipment, and proper procedures of metal inert gas (MIG) and tungsten inert gas (TIG) welding.

5. Basic Oxyacetylene Welding

Feature

Used Book in Good Condition

Description

Book by Griffin, Ivan H.

6. Cast Iron Oxy-Acetylene Welding Rod

Feature

Retains good color match.
Can be ground, milled, drilled, and tapped after welding.
Post heating is not as critical as with NI rod.

Description

For welding Cast Iron while retaining good color match and machinablity. You get 4 sticks 1/4" square by 20" long. Weight of 4 rods is 1.2 lbs.

7. Hot Max 24076 Medium Duty Victor Style Gas Heating Tip/Nozzle for Oxy-Acetylene, Size 0 (0-W-1)

Feature

Victor Style Gas Heating Tip/Nozzle, Medium Duty
For Oxy-Acetylene
Gas heating tips/nozzles are used to protect the quality of your welding or cutting

Description

Hot Max Victor Style gas heating tip/nozzle is always a nice option for anyone with an oxy-acetylene cutting torch. It can be used for most anything from heating up bolts for loosening to beating or bending flat steel. Some people try to make a cutting tip do the job of a heating tip but most generally there is not enough heat. Of course there is always the risk of blowing right through the metal with the oxygen from your cutting tip. For safety, efficiency, and many other reasons, we always recommend using the right tool for the job. Most of the heating tips that are available for cutting torches are made for use with acetylene gas.

8. SA - Oxygen and Acetylene Regulators Welding Gas Gauges -Pair - Rear Entry - LDP series

Feature

***READ THIS BEFORE YOU BUY*** Please check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and Hoses.
Small regulator for portable Oxy-Acetylene Welding and Cutting Kits
Rear Connector CGA-540 fits all Oxygen Tanks and CGA-200 fits Acetylene MC Tanks
9/16" - 18 RH & LH Outlet Hose Fittings
Oxygen Delivery Gauge: 0-100 PSI / Acetylene Delivery Gauge: 0-30 PSI

Description

***READ THIS BEFORE YOU BUY*** Please check all the Pictures with the Dimensions of the Connectors, and make sure that these Regulators fit your Tanks and Hoses. Small regulator for portable Oxy-Acetylene Welding and Cutting Kits Rear Connector CGA-540 fits all Oxygen Tanks and CGA-200 fits Acetylene MC Tanks Solid machined brass body Standard 9/16" - 18 RH & LH Outlet Hose Fittings Oxygen Delivery Gauge: 0-100 PSI / Acetylene Delivery Gauge: 0-30 PSI

Conclusion

By our suggestions above, we hope that you can found the best oxyacetylene welding for you. Please don't forget to share your experience by comment in this post. Thank you!