Top pex pipe heater for 2022
When you looking for pex pipe heater, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable pex pipe heater is not an easy task. In this post, we show you how to find the right pex pipe heater along with our top-rated reviews. Please check out our suggestions to find the best pex pipe heater for you.
Best pex pipe heater
1. EasyHeat 2102 Freeze Free Heating Cable - 100'
Feature
Self-regulating pipe heating systemProvides flexible protection against pipe freeze-ups in even the most challenging applications
Reduces power consumption when the pipe does not require freeze protection
Ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures
Length: 100' and rugged metal braided jacket provides an electrical ground as well as protection against damage
Description
EasyHeat Freeze Free self-regulating pipe heating cables provide flexible protection against pipe freeze-ups in the most challenging applications. The cut-to-length technology is ideal for installations that require protection of numerous pipes of varied lengths. The self-regulating effect of the cable reduces power consumption when the pipe does not require freeze protection. They are ideal for use on residential metal or plastic water supply and drain pipes subject to freezing temperatures; water supply lines underneath manufactured homes; and cottages, barns and outbuildings that are not regularly used.2. EcoSmart ECO 11 Electric Tankless Water Heater, 13KW at 240 Volts with Patented Self Modulating Technology
Feature
Lifetime warranty or residential use. Save up to 60% on your water heating costs with the most advanced, self modulating technology available. Dimensions : 11.5 H x 8 W x 3.75 D inchesNever run out of hot water with an ECOSMART tankless water heater.
Save up to 12 cubic feet of storage space. Digital temperature control in 1-degree increments gives users complete control of hot water
11Kw at 220 is equal to 13kw at 240 and activation flow is 0.3 GPM
The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire.
Description
This Smart Technology electric tankless water heater is configured as a "whole home" model for climates where incoming water temperature is 67F and above. This model is well suited for heating up to 2-Gallon per minute, which is the equivalent of one shower head (with a 1.5 gpm flow) and one sink with a low inlet water temperature of 67F and an output setting of 105F. Digital Temperature Control allows you to set your temperature in increments of 1 Degree. This model can also be used in colder climates as a Point of Use for a sink or other low flow application. All tankless water heaters are sized based on flow rate and temperature rise, and there is a direct relationship between the two. So if used in a cold area requiring a high temperature rise, it will be more limited in the amount of fixtures (gallons per minute) it can heat at one time compared to a warmer climate. When sized properly this water heater will provide endless hot water and only consume the energy needed, giving the user complete control. Prior to purchase and installation please verify this model is the right size for the expected demand and electrical requirements. The ECO 11 requires a minimum 125 amp electrical panel for installation with (1) 60 amp double pole breaker connected to (1) set of #6 awg wire. Plumbing connections are 1/2" compression fitting with the option of 1/2" NPT adapter included. For additional assistance please feel free to contact our support center at 877-474-6473.NOTE : 11Kw at 220 is equal to 13kw at 240.
3. Frost King HC6A Automatic Electric Heat Kit Heating Cables, 6 Feet, Black
Feature
6Ft x 120V x 7W/ft.Keeps water flowing down to (-40) degrees F
For metal and plastic water pipes
Easy to install
4. Frost King HC30A Automatic Electric Heat Kit Heating Cables, 30', Black
Feature
For metal and plastic residential water pipesKeeps water flowing down to (-40) degrees F
For use on 2 in. metal and plastic water pipes.
Easy to install
120V, 7 Watts per foot.
5. HEATIT JHSF 30-feet 120V Self Regulating Pre-assembled Pipe Heating Cable
Feature
JHSF doesn't work unlss the ambient tempeure is below 37F/3 degree C. Please test the cable in a cold envirment. HEATIT is regtered Tradark by zhukeshi(We didn't authorize other sellers in Amazon.com).Suitable for use on plastic and metal water pipes.( including inlet pipe,drain pipe, sewer , palm tree frost protion etc). Self regulating heating cable output will adjust automatically based on the ambient temperature at each point along the cable. No worry about the overheat risk. More Safe. Can be used by straight, spiral and overlap. More functional.
Pre-assembled, easy to install. Including groded plug with light, built in thermtat(turn the cable 37F on 50F off), and instructions. 120 volt, 3 watts/ft at 50 degrees F. Energy-efficient. Protect pipes up to 2" in diameter. For a better freeze protection, at least 1/2 inch thick insulation material is recommended, especially for extremely cold weather.
ETL approved. 2 ft 18/3 cold lead with plug. Industrial grade heat shriage tube for connection.The lowest installation temperature of this heating cable is -10 degree C. Tough XLPE as inner insulation and weather resistant PE (high-low temperature) as out jacket. Ingress Protection 65. Durable
Testing the cable before the instalation. Uncoil the cable, plug in the heating cable and then put the thermtat part of the cable into an ice bucket for few minutes. When the temperature is below 37F, the thermostat will energize the cable to work. Normally you can feel the slight warm on the heating cable in few minutes. Four year limited warranty. If you are not completely satisfied with HEATIT heating cable, please feel free to contact us in any time, we'll try our best to solve your issue
6. Flextron FTWC-S34-18F 18" Corrugated Connector for Water Heater with 3/4" Fip and 3/4" Pex Ends, Stainless Steel
Feature
High-Quality Corrugated Stainless Steel; Flexible for Easier ConnectionMaximized Corrosion Resistance and Performance
Easy & Fast Installation; Wont Crimp or Kink and 100% Leak Tested
Built-in Dielectric Sleeves; No Need for Extra Add-On Unions
Complies with Lead Free Requirments (NSF 61, AB1953)
7. 1/2x1/2 FIP 20" Water Heater Hose Kit with Disconnect Clip - Lead free fittings for Copper Pipe, PEX, CPVC, HDPE and PE-RT plumbing - 100% Satisfaction Guarantee
Feature
INSTALLS IN SECONDS: Quick Push-Fit connection insures a clean leak free connection with no special tools, no soldering, no clamping or crimping, no unions or glue EASY Just push to create a water tight seal.COPPER, PEX, CPVC: TigerBite plumbing fittings fits copper tubing, and CTS CPVC and PEX and connects all three types in any combination.
Push-Fit INSTALLATION TIPS: (1) Gently cut tubing squarely while maintaining tubing roundness. (2) Remove abrasions & deformations from tubing exterior that may inhibit tight O-ring seal. (3) If tubings already stiff and holds roundness discard nylon stiffener (i.e copper, and PEX) To remove stiffener safely, release grip ring contact with disconnect clip, while pulling stiffener with pliers.
(4) For easier install - Apply stiffener to flexible tubing types before inserting into coupling. (5) Mark 1 insertion depth on tubing to indicate when tubing seats properly beyond O-ring. (6) Push tubing beyond O-Ring for water tight seal - Observing mark ends up near coupling body. (7) Disconnecting While pressing disconnect clip towards coupling body to release internal grip ring contact, rotate and pull.
CERTIFIED: TIgerBite fittings are certified to 200 PSI and 200 degrees Fahrenheit (93 degrees Celsius). Certified to ANSI/NSF-61 and ASSE 1061 product standard for use in potable water and hydronic heating water distribution and is the only brand to provide a lifetime warranty.
8. Happybuy Oxygen Non-Barrier PEX Tubing 3/4 Inch 300 Feet Tube Coil - EVOH PEX-B Pipe for Residential Commercial Radiant Floor Heating Pex Pipe
Feature
RELIABLE QUALITY- Color: White; Nominal Diameter:3/4"; Total Length: 300ft. Keep quick & uninterrupted hot/cold water flows. Made of PEX material, non-toxic, crack-resistant, leak-proof. Perfect to at potable water or radiant floor water useSUPERB SEALING- Non broken design, tackle with different weather circumstance, no matter high temperature or cold days, it will not deform, thus to ensure integrity and safe use.
EFFORTLESS INSTALLATION- Send with a pipe cutter & 10 clamps, easily cut pipes to different length and fix them with clamps. Assemble method: Clamp Connection Systems(Cinch Tool + St. Steel Clamps + Crimp Fittings).
PREMIUM FLEXIBILITY- Min. 5ft bending radius, easy to bend for different ground situation. Big pressure capacity:188-217psi at 20 and 101-108psi at 95. Compatible water temperature:-47 to 230. Thus to ensure its good temperature resistant, crack- & leakage-proof.
DIVERSE USE SCENARIO- Suit for radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc.
9. Happybuy 5/8 Inch x 500Ft PEX Tubing Oxygen Barrier O2 EVOH Pex-B Red Radiant Floor Heat Durable Plumbing Flexible for Residential Commercial Radiant Floor Heating Pex Pipe
Feature
RELIABLE QUALITY- Color: Red; Nominal Diameter: 5/8"; Total Length: 500ft. Keep quick & smooth hot/cold water flows. Made of PEX material, crack-resistant, leak-proof. Perfect to at potable water or radiant floor water use.ROBUST O2 RESISTANT- External EVOH layer, stop O2 into the tube, protect metal components. Heating system's service time can be greatly increased with this kind of tube.
EFFORTLESS INSTALLATION- Send with a pipe cutter & 10 clamps, easily cut pipes to different length and fix them with clamps. Assemble method: Clamp Connection Systems(Cinch Tool + St. Steel Clamps + Crimp Fittings).
PREMIUM FLEXIBILITY- Min. 6" bending radius, easy to bend for different ground situation. Big pressure capacity: 188-217psi at 20 and 101-108psi at 95. Compatible water temperature: -47 to 230. Thus to ensure its good temperature resistant, crack- & leakage-proof.
DIVERSE USE SCENARIO- Suit for radiant floor heat system, solar water heater system, central air-conditioning piping system etc. Structural concrete slabs, Non-structural slabs, Staple-up (between joists) radiant floor heating with and without heat transfer plates, "Sandwich" type radiant heating (between sub floor and finished floor), Snow & ice melting systems etc.
10. Heat Cable for Pipe Freeze Protection, 80 feet, with Built-in Thermostat and 16 Feet of High-Temp Installation Tape, Heavy-Duty, Self-Regulating, 120 volt
Feature
THIS CABLE WILL NOT TURN ON UNLESS IT IS IN A COLD ENVIRONMENT. Weve received a couple bad reviews from people testing the cables in their living rooms. Please dont be that guy.USES: Use on the inside or outside of all types of water carrying pipe including copper, steel, PVC, ABS, PEX, concrete and more; can be exposed directly to water and is rated for soil contact.
AMERICAN SUPPORT: Knowledgeable, Minnesota-based company with expert support staff you can actually speak to! We are excited to help with your installation questions.
HEAVY DUTY: Integrated thermostat turns cable on at 37F, off at 50F, greatly reducing energy waste. Cable is 8mm wide and includes a 24 unheated cord (add to stated cable length). Cable has commercial-grade outer jacket for long life and carries a FOUR YEAR WARRANTY.
TAPE INCLUDED: 16 feet of high-temperature glass cloth tape is included with this cable.
Recent Comments