Best plywood holder for 2019
If you looking for plywood holder then you are right place. We are searching for the best plywood holder on the market and analyze these products to provide you the best choice.
Best plywood holder
1. Gator Lift Plywood and Sheetrock Panel Carrier, 0 to 1 1/8", Heavy Duty Metal Gripper, Sheet Goods Carry Handle (Single)
Feature
HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of plywood, panels, sheets, and slabs. Use the Gator Lift to grip and carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper accommodates panel thicknesses of 0 to 1 inch.GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds. Get the job done quicker with this convenient sheet and panel mover.
SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use.
EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand. Rather than bending over to lift materials from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift.
SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety of different kinds of panels and sheet goods. As soon as you start lifting, the clamp automatically adjusts to the thickness of the panel or sheet. This innovative tool can hold up to two panels or sheets simultaneously.
Description
The Gator Lift is a must-have tool for anyone who needs to lift drywall, plywood, sheet metal, stone slabs, etc. Our innovative design allows a single person to lift full sheets of materials with only one hand. The tool consists of a gripper clamp and a handle. The handle is connected to a joint in the clamp, making the clamp self-adjusting. To use, place the clamp portion of the tool over the top edge of the material you need to lift. Then simply lift! As you lift, the clamp automatically adjusts to the thickness of the sheet or panel, gripping it tightly. The clamp has a rubber grip surface that applies even pressure to the sheet or panel. When you're ready to remove the Gator Lift, simply set the material down and the clamp will automatically release its hold. Our versatile, yet simple design allows the Gator Lift to hold onto a variety of materials. Use it to carry MDO panels, MDF panels, OSB, and other kinds of plywood, as well as melamine, drywall/sheetrock, tabletops, stone slabs, sheet metal, and other sheet goods. The gripper accommodates material thicknesses of 0 to 1 inch, and it can securely hold onto loads of up to 200 pounds. You can use it to safely lift up to two panels or sheets at a time. This tool is exceptionally well built. It has a solid metal construction: the clamp and the handle arm are machined from aerospace-grade aluminum, and the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. The Gator Lift is so ridiculously well made that we offer an unlimited warranty-simply send us the damaged Gator Lift and we'll send you a replacement. This tool makes lifting panels and sheets significantly easier, and it makes lifting easier on your back as well. Rather than bending over to lift panels and sheets from the bottom, you can use the Gator Lift to hold panels and sheets from the top. Compared to competitors' prices, the Gator Lift represents the best value on the market!2. Gator Lift Plywood and Sheetrock Panel Carrier, 0 to 1 1/8", Heavy Duty Metal Gripper, Sheet Goods Carry Handle (2 Pack)
Feature
HEAVY-DUTY HOLDER FOR CARRYING DRYWALL, PLYWOOD, ETC. - Gator Lift presents one of the most innovative tools for lifting and carrying all kinds of plywood, panels, sheets, and slabs. Use the Gator Lift to grip and carry MDO or MDF panels, OSB, melamine, drywall, tabletops, sheet metal, and other sheet goods. The self-adjusting gripper accommodates panel thicknesses of 0 to 1 inch.GRIP HANDLE FOR ONE-HAND CARRYING - This panel/plywood lifter features a durable, impact-resistant ABS handle that makes it easy for a single person to lift and carry full sheets of material with only one hand. The clamp can hold up to two sheets or panels at once, accommodating loads of up to 200 pounds. Get the job done quicker with this convenient sheet and panel mover.
SOLID METAL CONSTRUCTION - This tool is built to last, with a heavy-duty solid metal construction. The clamp and the handle arm are machined from aerospace-grade aluminum, while the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. This high-quality construction ensures that the tool can hold up to a lifetime of strenuous use.
EASY ON YOUR BACK - Carrying drywall, plywood, and sheet goods can be very hard on your back. This handy tool takes the strain off your back and allows you to carry heavy materials with a single hand. Rather than bending over to lift materials from the bottom, simply place the clamp over the top edge of the material, then lift. The self-adjusting clamp holds materials tight as you lift.
SELF-ADJUSTING GRIPPER CLAMP - This piece of equipment by Gator Lift has a versatile, yet simple design that allows the clamp to grip onto a variety of different kinds of panels and sheet goods. As soon as you start lifting, the clamp automatically adjusts to the thickness of the panel or sheet. This innovative tool can hold up to two panels or sheets simultaneously.
Description
The Gator Lift is a must-have tool for anyone who needs to lift drywall, plywood, sheet metal, stone slabs, etc. Our innovative design allows a single person to lift full sheets of materials with only one hand. The tool consists of a gripper clamp and a handle. The handle is connected to a joint in the clamp, making the clamp self-adjusting. To use, place the clamp portion of the tool over the top edge of the material you need to lift. Then simply lift! As you lift, the clamp automatically adjusts to the thickness of the sheet or panel, gripping it tightly. The clamp has a rubber grip surface that applies even pressure to the sheet or panel. When you're ready to remove the Gator Lift, simply set the material down and the clamp will automatically release its hold. Our versatile, yet simple design allows the Gator Lift to hold onto a variety of materials. Use it to carry MDO panels, MDF panels, OSB, and other kinds of plywood, as well as melamine, drywall/sheetrock, tabletops, stone slabs, sheet metal, and other sheet goods. The gripper accommodates material thicknesses of 0 to 1 inch, and it can securely hold onto loads of up to 200 pounds. You can use it to safely lift up to two panels or sheets at a time. This tool is exceptionally well built. It has a solid metal construction: the clamp and the handle arm are machined from aerospace-grade aluminum, and the joint is made from a solid steel bar. The handle itself is made of durable, impact-resistant ABS polymer. The Gator Lift is so ridiculously well made that we offer an unlimited warranty-simply send us the damaged Gator Lift and we'll send you a replacement. This tool makes lifting panels and sheets significantly easier, and it makes lifting easier on your back as well. Rather than bending over to lift panels and sheets from the bottom, you can use the Gator Lift to hold panels and sheets from the top. Compared to competitors' prices, the Gator Lift represents the best value on the market!3. Bora Portamate PM-1800 Panel Carrier Full 4x8 Sheet Carrier Board Cart Table Saw Feed Stand That Allows One Person to Easily Move and Cut 4x8 Sheets
Feature
SPECIFICALLY MADE FOR LARGE BOARDS - Ingenious design allows for easy moving of unwieldy sheets of plywood, paneling, and moreTHE STRENGTH TO HANDLE SEVERAL BOARDS 350 lb. capacity, with the a 2-1/4" bottom lip of the support arm being wide enough for 2-3 sheets at a time
IT FLIPS UP AND ADJUSTS! The support arm can tilt and lock horizontally, and is adjustable from 28" high to 38" high
IT'S A TABLE SAW FEED STAND. The support arm can be locked at 90 deg, height adjust and support leg extends for a rock-solid table saw feed stand
BORA PORTAMATE QUALITY - Built with meticulous care by Bora Portamate, you'll use this in your shop for years to come
Description
Imagine effortlessly handling and moving 4x8 sheets without a helper. Even better, you can bring a piece of material from your truck and run it through your table saw without it ever touching the ground! This becomes possible with the Port-A-Mate PM1800 panel carrier, our sheet carrier / board cart is specifically designed for moving and working with large sheets of material (even full 4x8 sheets!) The best way to describe our sheet carrier is it's like a hand truck specifically made for boards. Well, that comparison would be more valid if a normal hand truck flipped up and locked into a level, horizontal table-saw feed stand, of course! Because that's exactly what this one does - the height is fully adjustable from 28" to 38", meaning just about any table saw can be accommodated. The bottom support leg locks into place, giving you the stability you need to cut with confidence, and then go back for another sheet or three! It's strong, sturdy, and can handle 2-3 sheets at a time, making it a true workhorse for your shop. And it's built by Port-A-Mate, so you know it's going to last for years to come.4. Flameer 2X Panel Carrier Gripper Handle Carry Drywall Plywood Sheet Lifting Carrying, perfect for the construction industry
Feature
Material: ABS PlasticColor: Black
Size: Approx. 18.5x 12.5x 13cm/ 7.28x 4.92x 5.12inch
100% brand new and high quality
An unique lifting and carrying tool perfect for the construction industry.
Description
Description:
- 100% brand new and high quality
- An unique lifting and carrying tool perfect for the construction industry.
- Its ergonomic design allows one person to carry heavy panels from the top with one hand.
- A soft handle is also equipped to relieve the hand pressure and greatly reduce the risk of injuries to back, neck, shoulders, arms and hands.
- Function: handling heavy panels, saving labor and reducing the risk of injury
Specification:
- Material: ABS Plastic
- Color: Black
- Size: Approx. 18.5x 12.5x 13cm/ 7.28x 4.92x 5.12inch
Package Includes:
2 Pieces Panel Grippers
Note:
The color may have different as the difference display, pls understand.
Please allow 1-3mm error due to hand test.
Your satisfaction is our priority. So we would deliver the highest quality products and services to meet your satisfaction.
5. Pentagon Tools 83-DT5648 Panel Pusher Dolly | Plywood-Doors-Drywall
Feature
THE FEATURES YOU NEED: Adjustable up to 9 inches - "T" screw handle locking systems makes adjustments easy and fastMAKING THINGS BETTER: Easy moving 10 inch inflatable wheels
STORAGE SPACE: Small and lightweight for easy storage and maneuverability
MADE THE RIGHT WAY: Top grade / quality steel
MULTI USE YOU SAY: Holds up to 600LBS worth of doors, drywall, plywood, and other assorted sheeted material
Description
The Pentagon Tool Panel Pusher Dolly is ideal for moving large, heavy or bulky objects such as doors, drywall panels, wood paneling, or other large objects that usually take two or more people to move. 10 inch inflatable wheels make using the panel pusher on most terrain possible. Assembly is quick and easy only taking a few minutes to get ready for all your hauling needs. Always ensure your load is stable and secure in the dolly before moving.
- THE FEATURES YOU NEED: Adjustable up to 9 inches - "T" screw handle locking systems makes adjustments easy and fast
- MAKING THINGS BETTER: Easy moving 10 inch inflatable wheels
- STORAGE SPACE: Small and lightweight for easy storage and maneuverability
- MADE THE RIGHT WAY: Top grade / quality steel
- MULTI USE YOU SAY: Holds up to 600LBS worth of doors, drywall, plywood, and other assorted sheeted material
- 1 Year Warranty
6. Drywall Lift Plywood and Sheetrock Panel Carrier Handle Heavy Duty Metal Gripper Portable Sheet Goods Tool
Feature
Good MaterialPanel carrier handle is made of high quality iron material, hard, tough and durable, not easy to deform.Self-Adjusting Gripper ClampThis piece of equipment has yet simple design high hardness, uneasy to broken. As soon as you start lifting, the clamp automatically adjusts to the thickness of the panel or sheet.
Advanced Ergonomic DesignErgonomic design allows one to carry heavy panels from the top with one hand. labor-saving,back-saving, makes it easy for people to lift and carry sheet goods, reduces strain on back, neck, shoulders & arms, promotes personal safety in multiple ways.
Easy to UseWhen you use it, just need to put it on the material needed to carry, and then lift it by hand.
MultifunctionalThis plywood carrier one of the most innovative tools for lifting and carrying all kinds of plywood, panels, sheets, slabs and boards. Use this gripper to clamp and grip melamine, drywall, tabletops, metal plates and other sheets.
Description
Specification:
Condition: Brand newMaterial: Nylon + iron
Color: Black
Suitable range: Panel lifting
Handle length: 14.8cm/ 5.8in
Size: Approx. 12.3 x 12 x 20cm / 4.8 x 4.7 x 7.9in
Package list:
1 * Panel Carrier
Note:
Please allow 1-3cm error due to manual measurement and make sure you do not mind before ordering. Please understand that colors may exist chromatic aberration as the different placement of pictures.
7. Stanley 93-301 14-Inch Yellow Panel Carry Handle
Feature
Panel carry helps you easily hand-carry panels of flat wood or other materialProvides increased balance and control during transportation
Angled handles keep hands away from panel for added comfort
Comes in high-visibility yellow
Includes 14-inch handle for extra reach
Description
This item is Stanley 93-301 14-Inch Yellow Panel Carry Handle . Used for Handtools & Tool Organizers, Hammers. The product is manufactured in United States.8. Gorilla Gripper 'Advantage'
Feature
Ergonomic design for one person, Cushion-handle for all day comfortSuper leverage 'Advantage' Rate up to 100 pounds
High-strength glass-filled nylon polymer gripper plates
Labor-saving. Back-saving.
American Engineered and Made in the USA
Description
Gorilla Gripper's 'Advantage' 44015 is a GP (General Purpose) Panel Carrier is a unique Lifting & Carrying System and is not just for construction industry. Its ergonomic design allows one person to carry heavy sheet goods (such as plywood, drywall, particle board, melamine, thick glass panels & lots of other such materials), from the top using only one hand. Comes with a ergo cushion- handle for all day comfort. The Gorilla Gripper simplifies that task, greatly reduces the strain & risk of injury to the back, neck, shoulders, arms & hands. Gorilla Gripper works by clamping onto the top of the panel, creating a sturdy temporary handle for the person who is carrying it. It grips & won't let go until you lower the handle. It allows the user to lift & move such materials with a straight back, eliminating the requirement of bending over to get under the bottom, thus avoiding the torqued back & the aches & pains that are far too familiar to construction workers, woodworkers even do-it-yourself. Gorilla Gripper is made of an eXtremely durable glass-filled nylon polymer gripper plates & epoxy coated steel supports arms. Has a continuously self- adjusting from zero (0) to 3/4" (zero (0) to 21mm). It's also excellent for carrying signs (Single or multiple up to the full 3/4" thickness capacity of the gripper). The special rubber gripping pads mounted on both plates protect the surfaces of the materials from being damaged or marred. Rate up to 100 pounds. Sporting the Gorilla Gripper logo. American Engineered & Made in the USA. There's nothing priced or like the Gorilla Gripper Lifting & Carrying System... In other words the Gorilla Gripper 'Advantage' ROCKS - it works!9. Hi-Craft HC545 Lift and Carry Panel Mover
Feature
Carry up to 150 lbs.Handle angled to carry material away from hands
Rubber pads prevents movement of material while carrying
Durable plastic construction
Description
Hi-Craft HC545 Lift and Carry Panel Mover10. Gorilla Gripper 'GP' 0 to 3/4" (0 to 22mm)
Feature
Automatically clamps onto any stock from 0''-3/4''Ruggedly built; indestructible
Made in the USA from aircraft aluminum
Load rating of 200 lbs.
Labor-saving. Back-saving
Recent Comments