Top rework flux paste for 2022
If you looking for rework flux paste then you are right place. We are searching for the best rework flux paste on the market and analyze these products to provide you the best choice.
Best rework flux paste
1. SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar
Feature
The ideal flux for electrical and electronic repairsContains 2 ounce in a "hockey Puck" jar
Formulated for use with tin/lead and lead-free alloys
Description
This petroleum/rosin contains NO Zinc Chloride or Ammonium Chloride, making it a better choice for electronic repairs. Rosin leaves a protective coating over soldered area once job is finished2. Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip - SMD291
Feature
Remove QFDs, PLCCs, SOICs and chip components without costly equipmentUse with existing rework equipment or temp controlled soldering irons
Special removal alloy has excellent wetting ability
Low melting temperature
Safe, affordable, easy and won't damage sensitive components
Description
Remove QFDs, PLCCs, SOICs and chip components without costly and complex equipment. Use ChipQuik with your existing rework equipment or temperature controlled soldering irons. Special removal alloy has excellent wetting ability with a low melting temperature of 136F (58C). To use: apply paste flux to all leads with syringe; melt ChipQuik alloy on all pins of SMD; with wide iron tip; maintain alloy in a molten state long enough to release chip; lift chip from board with pick-up tool. Safe, affordable, easy and won't damage sensitive components. NoClean Paste Flux; 10cc syringe with tip.3. MG Chemicals - 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)
Feature
Superior fluxing abilityInstant wetting
After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
Compatible with lead free and leaded solder systems
Thixotropic paste; RoHS compliant
Description
No Clean Flux Paste. Convenient syringe dispenser ideal for touch up and repair of surface mount assemblies. A unique mixture of high grade synthetic resin and thixotropic agents designed specifically for use with high temperature lead free and conventional Sn/Pb alloys. It provides the fluxing activity levels that promote fast wetting action and maximum wetting spread. Flux paste is a no clean formulation therefore the residues do not need to be removed for most applications. Excellent wettability, no clean, non-conductive, non-tacky residues, compatible with lead free and leaded solder systems, thixotropic paste and RoHS compliant. RoHS compliant.4. Kester EP256 Solder Paste, No-Clean 63/37, Syringe Dispenser (1)
Feature
Packed as pictured. 8cc syringe contains 35 grams of solder pasteKit Includes five 19-gauge dispensing tips (0.033" inside diameter)
63/37 Tin/Lead, the most common for electronics work
No-clean flux formula
Description
Legendary Kester Solder in a convenient Dispense-Pak Saves You Money!
35 gram syringe - includes bonus dispensing tips
Kester EP 256 is a paste solder developed for high volume SMT reflow soldering. It is a no-clean solder paste specifically designed for maximum robustness in reflow profiling. EP256 has the widest possible reflow processing window.
Residues that remain after soldering are almost colorless, leaving a cosmetically appealing repair. The residue is safe to be left on the assembly after soldering.
Features:
* Kester EP256 63/37 Tin/Lead, the most common for electronics work
* Packed as pictured. 8cc syringe contains 35 grams of solder paste
* Kit Includes five 19-gauge dispensing tips (0.033" inside diameter)
* Stable wetting behavior over a wide range of profiles
* Excellent solderability to a wide variety of metals
* No-clean flux formula. Residues don't need to be removed for typical applications
* Flux residue is non-corrosive and non-conductive
* Stored in refrigeration until shipment
* Factory fresh, NOT SURPLUS. Shipped in labeled package with date code. Shelf life 6mos from DOM
Warnings and cautions:
* For industrial use only
* Repacked from a bulk package. Product is guaranteed to be as labeled
* We can not offer application advice. For use by experienced electronics technicians
* User assumes all risk for application. Warrantees are limited to replacement or refund of product.
* Always wear safety glasses when working with soldering equipment and materials
* Always use adequate ventilation when working with soldering equipment and materials
* Avoid breathing flux fumes emitted during soldering. Flux fumes may cause pulmonary irritation or damage.
* This product may contain chemicals known to the state of California to cause cancer and/or other reproductive harm.
5. CS-FLUX reballing Low viscosity Halogen-free liquid flux for BGA component rework reflow 15g . Ideal for VGA GPU repairs
Feature
CS-FLUX when heated at around 150 degrees (Celsius) turns into liquid and covers the small gap between the BGA component and the PCB complitelly. This way all solder balls are covered with CS-FLUX and durring reflow or removal of the BGA componets all PCB and componet pads and balls are protected from oxydation.CS-FLUX is no clean flux and causes no corrosion if not cleaned, but if needed it can be cleaned very easily with alcohol. It causes no corossion on the PCB or components.
Thank's to it's liquid nature, a very small amount of CS-FLUX is needed for each repair resulting in a much cleaner work enviroment. CS-FLUX is also Lead Free and halogen free and produces minimum amount of fume .
CS-FLUX is very sticky and specially designed to keep the solder balls inside the stencil durring the reballing proccess. It is also ideal for reflow of BGA components (with heatgun) when needed equipment for reballing is not avaliable. Due to it's liquid nature is perfect for microsoldering even for not experienced technitians.
CS-FLUX is produced in EU (Greece). We keep stock all around the world so that it can be shipped to your workshop very fast.
6. BGA Activated Rosin Solder Paste Tin Rosin-Based Flux Paste Cream for Soldering Rework Station Circuit Board PCB BGA SMD Soldering Repair (80g)
Feature
MECHANIC Advanced Paste Flux Soldering for mobile phone motherboard Repair, electric Soldering Iron Welding Fluxes for phone circuit board repair.Its boiling point only slightly higher than the melting point of the solder, For mobile phones, PC cards and other sophisticated electronic chip-level help welding.
High bond strength, PH value neutral, insulation is strong, welding surface smooth, is no corrosive for IC and PCB.
Wipe the surface of the object before soldering, apply the paste flux to the solder joint, solder the tin to the solder joint with soldering iron.
Specifications: Model: MECHANIC-UV80; Color: Yellow, Weight: 0.08kg; Viscosity: 0.2Pas; Granularity: 0.22um; Packing: Aluminum box.
7. Rectorseal 14010 4-Ounce Nokorode Regular Paste Flux
Feature
Item Weight: 4.9 lbCountry of Origin: China
Brand name: Rectorseal
Item Dimensions: 2.25"L x 2.25"W x 2.75"H
8. 50g Rosin Soldering Flux Paste No Clean Lead Free Solder Welding Grease Cream for Phone, PC Cards and Other Sophisticated Electronic Chip-Level Flux Welding
Feature
Net Content: 50g;Rosin flux is used to facilitate soldering.Application Scope: for mobile phones, PC cards and other sophisticated electronic chip-level flux welding.
It cleans and prevents metal oxidation which allows solder to create strong, long lasting mechanical and electrical bonds.
It also acts as a wetting agent, increasing the flow of solder and the efficiency of the soldering process.
Formulated for use with tin/lead and lead-free alloys,Quality Activate Rosin Flux Soldering Paste helps solder flow smoothly;
9. No Clean Tacky Soldering Flux 5 Grams
10. Kester RF741 No-Clean Electronics Rework Flux 6cc Syringe
Feature
6cc syringe contains enough flux for 15-20 BGA repairsHigh Viscosity- stays where you put it.
Compatible with most no-clean solders and fluxes.
Lead Free - RoHS compliant.
18 gauge dispensing tips as pictured for precision dispensing of flux.
Recent Comments