Best shotgun light with mount

If you looking for shotgun light with mount then you are right place. We are searching for the best shotgun light with mount on the market and analyze these products to provide you the best choice.

Best shotgun light with mount

Product	Features	Editor's score	Go to site
	NcDe Tactical Barrel Clamp Mount With Rail For 12 Gauge Shotguns And Magazine Tubes Fits Remington 870 1100 11-87 SP-10 Mossberg 500 835 Maverick 88Winchetser 1300		Go to amazon.com
	Elzetta ZSM-T Flashlight Mount for Tactical Shotgun, Remington 870, Mossberg 500, Quick Release Thumbscrew Model		Go to amazon.com
	Streamlight 88066 ProTac Rail Mount HL-X Fixed Mount Ten Tap, 1,000 Lumens,Black		Go to amazon.com
	Orion H40-W 500 Lumen LED Tactical Flashlight with Pressure Switch and Rifle Mount		Go to amazon.com
	High Power 1000Lm Flashlight Set, One Mode Bright Tactical Light Torch Lamp with Pressure Switch, Battery, Charger, Mount for Camping Cycling Emerency Use		Go to amazon.com
	WindFire Cree Xm-l T6 LED 1600 Lumens 5 Modes Tactical Flashlight with Remote Switch Pressure Tail Switch Wire Extended Switch and Flashlight & Laser mount for Gun/Rifle/Shotgun plus 2x 18650 Rechargeable Batteries and AC Charger Complete Set		Go to amazon.com
	Monstrum Tactical Shotgun Accessory Mount with 1 inch Flashlight Mount and Sling Swivel | for Full Length Mossberg 500/590 and Similar Shotguns		Go to amazon.com
	AcidTactical 1000 Lumen T6 CREE LED Gun Shotgun Rifle Flashlight, Rail Mount, Pressure Switch		Go to amazon.com
	Elzetta Tactical Shotgun Flashlight Mount		Go to amazon.com
	CDM MOD-C - Shotgun Flashlight Mount		Go to amazon.com

Related posts:

1. NcDe Tactical Barrel Clamp Mount With Rail For 12 Gauge Shotguns And Magazine Tubes Fits Remington 870 1100 11-87 SP-10 Mossberg 500 835 Maverick 88Winchetser 1300

Feature

High strength aircraft aluminum alloy with Anodized Black Matte Finish.
The solid hollow structure design utility model has simple and compact whole structure which conforms to principle of mechanics, solidly.
Attach tactical flashlights or laser scope sights,and other different accessories.
Lightweight, mounts light or laser scope sight, securely
Package Included: 1x NcDe Tactical Barrel Mount, 1x Hex wrench

Description

NcDe Tactical Light / Laser Clamp Mount!

The NcDe mount/rail is a quality item, and fit perfect on the shell tube, for tactical flashlights and laser sights.
This clamp has made it easy and quick to attach different accessories.
It's easy to attach your barrel and does not slide when fastened tightly.
The clamp mount is light and durable.
You have you choice where to attach, left side, right side, bottom.

Features:
1. High strength aircraft-grade aluminum alloy with Anodized Black Matte Finish, Rust-proof, Sturdy, Lightweight, don't increase any burden.
2. Friendly 4pieces Hex Screws design,easy to installation and more sturdier.

Diameter: 25.4mm

Package Included:
1x NcDe Tactical Barrel Mount
1x Hex wrench

2. Elzetta ZSM-T Flashlight Mount for Tactical Shotgun, Remington 870, Mossberg 500, Quick Release Thumbscrew Model

Feature

Fits Remington 870, Mossberg 500 and 590, Benelli M4 and Others
Requires 1.75 Inches of Free Space on the Magazine Tube and Barrel
Sizing Adapters Accommodate Flashlights From 0.70" to 1.05" in Diameter
Quick Release Thumbscrew Allows Rapid Installation and Removal of Flashlight
Attaches to Either Side of Shotgun

Description

Elzetta ZSM-T Tactical Shotgun Flashlight Mount (flashlight sold separately) attaches to barrel & magazine tube. The Elzetta ZSM-T is designed for 12-Gauge shotguns and also comes with gauge adapters to accommodate some 20-Gauge and .410 shotguns. Elzetta ZSM-T includes sizing adapters allowing installation of flashlights from 0.70 to 1.05 inches in diameter (18 to 27 mm). This includes flashlights from popular manufacturers such as InForce, Streamlight, Pelican, Laser Devices, SureFire, and of course, Elzetta Modular Flashlights. (Sizing adapters are not required when using an Elzetta Flashlight or other 1-inch Light). The Quick-Release Thumbscrew allows flashlights to be installed and removed rapidly and without tools. ZSM-T can be mounted to either side of the shotgun to accommodate left-handed or right- handed shooters. This glass-filled polymer construction provides outstanding durability, impact resistance, scratch resistance and light weight. It also withstands high temperatures, vibration, and most chemicals. The Elzetta ZSM-T works with Remington 870, Remington 1100, Remington 1187, Mossberg 500, Mossberg 590, Mossberg 590A1, Mossberg 835, Mossberg 930 SPX, Benelli M1, Benelli M2, Benelli M3, Benelli M4, Benelli Nova, Benelli Super Nova, Winchester Defender, and many other shotguns that have 1-3/4" (44 mm) of free space on the magazine tube and barrel. All Elzetta products, including the ZSM-T, are designed, engineered, and manufactured in the USA using American materials, tooling, and labor.

3. Streamlight 88066 ProTac Rail Mount HL-X Fixed Mount Ten Tap, 1,000 Lumens,Black

Feature

1000 Lumen mountable flashlight
Multi battery versatility
High for a super-bright beam: 700 Lumens; 12,000 Candela; 219M beam distance; runs 1
25 hours
Medium for bright light and longer run time: 300 Lumens; 5,000 Candela; 141M beam distance; runs 3
25 hours

Description

The Streamlight 88066 ProTac Rail Mount HL-X is a 1,000-lumen weapon-mounted light featuring a rail clamp designed to rapidly and securely attach/detach from rifles, carbines, and submachine guns with a MIL Standard 1913 Rail. It uses either a remote switch with momentary/constant on operation or a standard push-button tail switch, and can run on either two CR123A lithium batteries or one Streamlight rechargeable 18650 battery.

4. Orion H40-W 500 Lumen LED Tactical Flashlight with Pressure Switch and Rifle Mount

Feature

Equipped with the Cree XM-L U2 500 lumens LED, this is one of the brightest Lights you can mount on your rifles
Comes with a constant on button switch and a momentary on pressure switch for different tactical need
The bundle includes a Picatinny/Weaver single Rail mount, ready to be installed
Compact, recoil-proof and water resistant
Robust one-year worry free warranty (Free replacement on any defective or broken parts)

Description

Designed for peak performance in the harshest environments, Orion H40-W Tactical Lights are compact, recoil-proof due to their virtually indestructible LED emitter. Comes with both constant-on clicky switch and momentary-on pressure switch, it is ready to be mounted on any rifle with standard picatinny rails. Redesigned in 2013 with the newest CREE XM-L U2 LED, the Orion H40-W emits a powerful 500 lumens white beam, ideal for identifying threats and overwhelming the sight of adversaries.

Specification
* LED type: Cree XM-L U2 (Cool White)
* Output and Runtime:
* * LED lumen: 640
* * ANSI FL-1 lumen: 500
* * Runtime: 75 min
* Lens: Waterwhite glass lens w/ harden treatment
* Reflector: Smooth aluminum reflector
* Beam Profile:
* * Center lux: 6400
* * Center spot angle: 9.6
* * Spill light angle: 58
* * Beam distance: 175 yards / 160 meters
* Battery: 2 x CR123A (included) or 1 x 18650
* Dimensions: 5.2" (L) x 1" (D)
* Weight: 3.4 oz (without battery)
* Material: High-strength aerospace aluminum body, hard-anodized for extreme durability
* Waterproof: IPX-7 standard

Package includes
* 1x Orion H40-W Tactical Light (with regular tail cap switch)
* 2x CR123A Batteries
* 1x Pressure switch
* 1x 1" Picatinny / Weaver rail mount
* 1x Instruction Sheet


Important Notice: Only purchase from US vendors to ensure you get the authentic product and warranty service.

5. High Power 1000Lm Flashlight Set, One Mode Bright Tactical Light Torch Lamp with Pressure Switch, Battery, Charger, Mount for Camping Cycling Emerency Use

Feature

HIGH POWER: Taclight is made from air-craft grade aluminum and can withstand extremes of temperatures, from freezing to boiling. It is water-proof and shock resistant
LONG SERVICE LIFE: The lifetime up to 100,000 hours, slip-resistant, daily Waterproof.
DESIGNED TO mount with proper mounting equipment. This set is really a good choice for your camping, cycling, outdoor activities.
Complete Set: 1x white light flashlight, 1 x battery, 1 x battery charger, 1x pressure switch, 1x Barrel Mount
100% SATISFACTION GURRANTEE: If you don't absolutely love your flashlight or if there are any issues with it at all, We will replace or refund your purchase, no worries at all. We want you to be completely happy with your new flashlight.

Description

Flashlgiht Specification:

LED Emitter: T6
Brightness: 1000 Lumens
Body Material: Aluminum alloy
Switch Mode: 1-Mode
Lamp Life: 100,000 hours
Lens: Convex lens
Battery: 1 x Red rechargeable battery

Dual Switches:

Switch 1: Tail-cap switch On/Off
Switch 2: Light momentary on switch by pressure pad

Mount Features:

Material: Alloy metal
Size: 1.8(W) X 3.6(L) inches
Ring Width: 1inches

Battery Specifications:

Battery Type: Rechargeable battery
Capacity: 3000mAh
Voltage: 3.7V
Material: Lithium
Charge Time: about 5-7hours

Battery Charger Specifications:

Input Voltage: AC100V-240V 50/60Hz
Output Voltage: DC4.2V

Package Included:

1 x 501B Flashlight
1 x Pressure Switch
1 x Mount
1 x Battery
1 x Battery Charger

6. WindFire Cree Xm-l T6 LED 1600 Lumens 5 Modes Tactical Flashlight with Remote Switch Pressure Tail Switch Wire Extended Switch and Flashlight & Laser mount for Gun/Rifle/Shotgun plus 2x 18650 Rechargeable Batteries and AC Charger Complete Set

Feature

WindFire CREE XML T6 U2 LED 1600 Lumen 5 modes Wf-C8 Cree U2 LED 18650 Battery Tactical flashlight
Aluminum alloy casing with o-rings for waterproof and shockproof design.
Coming with Pressure switch,Flashlight laser mount, batteries and charger for this C8 flashlight
Powr Source: work with 1 x 18650 Battery, 5 switch modes, Easy to operate, One-Button-Operation
Super brightness, best suitable for camping, travel, outdoor activities, etc..

Description

Item Specification:
Brand : WindFire
LED Type: CREE XM-L T6 U2 LED.
Light color: White.
Luminous Flux: Max to 1600LM.
Material:
- Structure: Aluminum Alloy.
- Lens: Coated Glass Lens.
- Reflector: Aluminum Smooth/SMO Reflector.
Waterproof Design:Yes.
Switch Location: At the bottom of the flashlight.
Mode Arrangement: 5 Modes(High, Mid, Low, Flash, SOS).
LED Lifespan: 100,000 hours.
Operate Voltage: 3.7V ~ 18V.
LED Lifespan: 100,000 hours.
Power Source: 1 x 18650 3.7V Battery (Included).
Color: Black.
Size:
- Length of the Flashlight: 133mm.
- Head diameter: 30mm.
- Body diameter: 24mm.
Net weight: 97g.
Note: The flashlight itself is not with rechargeable function.

What's In The Box:
1 x WF-C8 5 Modes CREE XM-L T6 LED Tactical Flashlight Torch.
1 x WindFire Remote Pressure Switch for WF-C8 flashlight.
1 x Flashlight & Laser mount for Gun/Rifle/Shotgun.
2 x WindFire 4000mah 18650 rechargeable batteries
1 x 18650 battery charger

WindFire After Service: 30 Days Money Back Guarantee, 12 Months Warranty!

7. Monstrum Tactical Shotgun Accessory Mount with 1 inch Flashlight Mount and Sling Swivel | for Full Length Mossberg 500/590 and Similar Shotguns

Feature

Accessory mounting system for full length Mossberg 500/590 series shotguns
Includes spacing pads for fitment to similar shotguns with full length barrel and magazine tube; Not compatible with the Mossberg Shockwave or shotguns without a full length barrel
Includes both a 1 inch diameter flashlight mount and a quick detach sling mount
Both units are detachable allowing for use together or as standalone units
All parts are constructed from lightweight 6061 grade aluminum

Description

Equip your shotgun for any situation with one seamless attachment - the Shotgun Accessory Mount System from Monstrum Tactical! The mounting system attaches securely to your shotgun between the barrel and magazine tube.

The mount is crafted to fit full sized Mossberg 500/590 series shotguns. Package also includes spacing pads for fitment to similar shotgun models with full length barrel and magazine tube. Note that this product will not fit the Mossberg Shockwave or shotguns without a full length barrel and magazine tube.

The mounting system comes with both a 1 inch diameter flashlight mount and a quick detach sling mount. Both units are detachable from the base allowing for standalone use.

Flashlight mount measures 1 inch in diameter for use with standard 1 inch diameter flashlights. Offset design allows for flexible positioning of flashlight.

The sling mount functions as a modular attachment point for you sling. The sling head can be attached and removed instantly from the base via the push button quick detach mechanism. The swiveling head provides free rotation of sling while remaining securely fastened to base.

All parts are constructed from lightweight 6061 grade aluminum.

8. AcidTactical 1000 Lumen T6 CREE LED Gun Shotgun Rifle Flashlight, Rail Mount, Pressure Switch

Feature

Powerfull 1000 Lumen XML T6 10 Watt LED bulb
Includes Picatinny Mount, Pressure Switch, Battery, Charger, & Storage Case.
Material: Aircraft-grade Aluminum T6160 Alloy
Zoomable Lens to light up small area at a distance or Large areas close up.
5 Light Modes: High Power, Med Power, Low Power, High Strobe, High SOS.

Description

Acid Tactical Tactical Flashlight 1000 Lumen XML T6 CREE LED

These are high quality made with aircraft grade aluminum.

1000 Lumens High Power CREE XML T6 10W LED

Includes:

1 CREE LED Flashlight 1000 Lumens
1 Rechargeable Battery (18650) 2200MAH (included)
1 AAA Battery insert - Can run off 3 - AAA batteries(not included) or the 18650 battery(included)
1 Picatinny / Weaver Rail Mount
1 Battery Charger
1 Pressure switch (Multi-Function)
1 on/off button cap
1 Allen Wrench
1 ring mount shock adsorption strip. (rubber strip that goes on the picatinny ring mount to absorb recoil)
1 Plastic Ammo Box / Gift Box as pictured.

Multi Function Wire Pressure Switch: The multi function wire pressure switch has a built in on/off button that can be clicked and left on. It also has a momentary pressure pad section that can be quickly depressed as needed.

5 Light Modes: This light has five modes that can be cycled if the switch is depressed within 4 seconds. If the switch is not depressed within 4 seconds it will always revert to High intensity.

Mode 1: Full power High Intensity
Mode 2: Medium Intensity
Mode 3: Low intensity
Mode 4: High Intensity Strobe
Mode 5: High Intensity SOS signal

We've designed these for night hunting backyard vermin. The zoomable focus can light up a small area at a distance. Great for night hunting. The zoom can also be adjusted for a wide angle light to illuminate a larger area.

Specifications:

Length Contracted: 5 3/8"
Length Extended: 6 1/8"
Tube Width: 1 1/8"
Head Width: 1 5/8"
Weight: 8oz with battery, mount, & pressure switch

9. Elzetta Tactical Shotgun Flashlight Mount

Feature

Tactical flashlight mount for Remington, Mossberg, WInchter shotguns
No rails required
Constructed of glass-filled polymer
Able to hold flashlights from 0.70 to 1.05 Inch in diameter
Sizing adapters included

Description

Every Elzetta ZSM comes with Sizing Adapters, giving the Flashlight Mount the ability to hold flashlights from 0.70 to 1.05 Inch in diameter (18 to 27 mm). The Elzetta ZSM is designed for 12-Gauge Shotguns and also comes with Gauge Adapters that allow the Elzetta ZSM to be used with 20-Gauge and.410 shotguns. When installed correctly, the Elzetta ZSM will not move under recoil nor allow the flashlight to move.

10. CDM MOD-C - Shotgun Flashlight Mount

Feature

Small and light weight Milstd Type III hard coat aluminum
Weighs just 1.8oz.
Ability to add a rail on one side
Includes QDPB sling swivel docking point
Fits 1" Flashlights

Description

MOD-C shotgun light mount The CDM Gear MOD-C light mount is a superior, light weight clamp (weighs only 1.8oz), small and compact enough to reduce your shotgun profile so it reduces hang ups and snags. Spaced between the barrel and magazine tube it will not block your parallel peripheral sight picture. Manufactured from 6061-T6 aluminum and hard coat anodized, it will not crack, break or shrink over time like plastic mounts. One tool for one bolt is all that is needed to attach and remove this clamp in seconds. Holds lights from .980" to 1.032" and comes with all wrenches and 3M polyurethane no slip grip pads to protect your finish. Includes a built in non rotational sling swivel cup for QD PB sling swivels.CDM Gear offers a factory look with a low profile that doesn't need to be removed when stowed in a case or riding in a gun rack. The design makes for a cleaner look with less snags to worry about, giving you professional control of your weapon. With illumination and targeting systems getting smaller, lighter and more compact, we're offering a professional mounting platform that provides for a stronger, less complicated attachment for your weapon. Fits 12 ga. shotguns with 1" of space on a 1" magazine tube. Fits Remington 870, 1100, 1187, Mossberg 500 7 shot, 590 (not the 590A1 or SPX models, see MTC clamp), Winchester 1300, 1200 and SXP Defender.

Conclusion

By our suggestions above, we hope that you can found the best shotgun light with mount for you. Please don't forget to share your experience by comment in this post. Thank you!