Top 10 swr meter hf vhf uhf for 2022
Shopping swr meter hf vhf uhf has never been easy. You may come many of website, read swr meter hf vhf uhf reviews, check the price… It will really makes you headache and tired. Don’t worry! I’ve found ways to make it less painful. Let’s find in below article.
Best swr meter hf vhf uhf
1. Astatic (302-PDC2) SWR/RF/Field Strength Test Meter , Black
Feature
3 functions: tests for SWR, RF power and field strengthDesigned to test any 50 ohm antenna and antenna coax used for CB operation
Mounting bracket and hardware included
Description
Designed to indicate the condition of any 50 ohm antenna and coax for cbs. 10 watts and 100 watts switches, forward and reverse switches.2. Gam3Gear SURECOM SW-33 Mark II 100 W 125-525 Mhz Mini Digital VHF UHF Two-Way Radio Handheld Power & SWR Meter
Feature
SURECOM SW-33 Mark II 125-525 Mhz Mini Digital VHF/UHF Power & SWR MeterVSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 100W
3 seconds check your antenna SWR, also check your radio RF power watt.
Easy to install handheld Radio
Description
Features:- VSWR. Forward and reflected power direct digital readout, without any calibration.
-Max. measurable power range up to 100W. - 3 seconds check your antenna SWR, also check your radio RF power watt.
- Easy to install handheld Radio
Specifications:
- Measurable power range: 0.1-100W
- Max. power: 100W Accuracy: mean + / - 5%
* Not for the DMR digital radio.
- MAX. Power in: 100W
- V.S.W.R: 1.00~19.99
- Frequency Range: COVER - 125MHz~525MHz
- Insertion Loss: < 0.15dB(VHF) , < 0.25dB(UHF)
- Temperature: 0~70
- Battery Built-in: Li-ion Battery
- Size:(WHIT OUT SMA): 25*25*60 (mm)
- Power in: 5V (micro usb)
- Interface (in and out ): SMA female
- Impedance: 50
- Weight: 160g
Features function
Push red button and hold 3 sec.to" Power on " and "SWR "mode "
Push red button -" Power Meter "mode
Push red button -" SWR "mode
Push red button and HOLD -" POWER OFF
How to use Power meter
Push red button -switch on
Push red button at once to mode "POWER meter "
Connect the SMA (mark TX) to Radio output .
Connect the SMA to DUMMUY Load
Caution:
Please use correct dummy load, High power will damage the dummy load.
How to use SWR meter
Push red button -" Power on " and "SWR "mode
Connect the SMA (mark TX) to Radio output .
Connect the SMA to ANTENNA
When the the led show 1.00 to 1.50 , mean the antenna is suit the frequency,
When the the led show 1.50 to 3.00 , mean the antenna is not good suit the frequency,
When the the led show up to 5.0 to 19.99 , mean the antenna is not suit the frequency.
Package includes:
1 x Surecom SW-33 Mark II
1 x SMA Dummy Loads
1 x English Manual
1 x USB Charge Cable
1 x USB AC Adapter 00-240V
3. Mcbazel Surecom SW-102 Digital VHF/UHF 125-525Mhz Antenna Power & SWR Meter
Feature
VSWR. Forward and reflected power direct digital readout, without any calibration. NOTE: DOES NOT compatible with Digital Radio.Maximum measurable power range up to 120W.
Low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency country . Interface: N-J Interface
Frequency range: 125 - 525MHz. Version: 4.5
Description
Warning: DOES NOT compatible with Digital RadioDescription
VSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W.
low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter.
All Function display ( Frequency, Power, SWR, FW, RW, Battery voltage)
Functions
Frequency range: 100 - 520MHz
Measurable power range: 0 - 120W
Input Frequency counter
Maximum power: 120W Accuracy: mean + / - 5%
Impedance: 50
Battery : 3.7V Li-ion Rechargeable Battery
Interface: N-J Interface
Size: 66*68*37 (mm)
Weight: 220g
Specification
MAX. Power in: 120 W
V.S.W.R: 1.00~19.9
Frequency Ranger: COVER 100MHz~520MHz
Insertion Loss: < 0.15dB(VHF) , < 0.25dB(UHF)
Temperature: 0~60
Input Frequency counter: Yes
Battery Voltage Display: Yes
Battery Build-in: 600 mAh Li-ion Battery
Auto Power Off: 1-9 mins
Charger in: 5V (micro usb)
Backlight: AUTO OFF 1-9 mins
Interface (in and out ): N(SL16)
Version: 4.5
Connect the Output of your transceiver to "TX" and Antenna or Load to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
1) Adj. RF Forward %
Press 2 second the [Red button] to power on or power off
Function Memory SAVE
1 Press MENU (Blue button)
2 Press F1 (Red button) (Select 1-6 Function)
3 Press Blue button ( - ), Yellow button (+)
4 Press the Red button for 2 seconds
5 Press the Blue button to SAVE and EXIT
Package List
1x SURECOM SW-102 Meter
1x Charger Cable
1x Users Manual
4. SWR / Power METER for VHF / UHF Ham Radio 120 - 500 MHz 150 Watt - Workman Model 104
Feature
VHF / UHF DualBand Meter.120-525 Mhz
5. Youmei RS-50 Digital SWR/Watt Meter VHF/UHF 125-525MHz 120W for Two-Way Radio
Feature
Forward/Reflected/VSWR ration in one push buttonLCD backlight display for easy reading
Convenient control layout for easy operation
Powered by two AAA batteries/rechargeable batteries or external USB port
Low insertion loss(0.3dB or lower) structure allows it to be connected permanently
Description
Specifications:
Frequency range: 125-525 Mhz
Center calibrated: 145Mhz(VHF) 435Mhz(UHF)
Power range:0-120W +/- 5%
Impedance: 50 ohm
Connector: M-J(So-239 (M))
Dimension: 70W x 78H x 30D mm
Net Weight: 220g
Measurement:
1. Apply output of transceiver to "TX" and antenna or load to "ANT".
2. "POWER" on for ready to use.
3. LCD display show simultaneously "Fwd/Ref Power and SWR".
4. For back-light, please switch "LIGHT" to "ON".
5. No function in 30 seconds, the backlight will automatically off.
6. Once PTT launched, the backlight will be back.
Battery installation:
1. Remove the black screw from the cover to open the rear panel.
2. Install 2 pcs "AAA" batteries.
3. Can be used with alkaline or Ni-Ca, Ni-MH rechargeable battery.
4. This unit has no built-in charging circuitry.
5. Be sure to correct polarity of battery.
6. Remove the battery if the unit won't be used in long period.
Packages includes:
1 x SWR/Watt Meter(no batteries)
6. Gam3Gear Surecom SW-102S SO239 Connector Digital VHF UHF 125-525Mhz Power & SWR Meter
Feature
VSWR. Forward and reflected power direct digital readout, without any calibration. NOTE: DOES NOT compatible with Digital RadioMaximum measurable power range up to 120W.
Low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter . Interface (in and out ): SO239.
Frequency range: 125 - 525MHz. Version: 4.5.02
Description
Warning: DOES NOT compatible with Digital RadioModel: SW-102S v4.5.02
Features:
1 VSWR. Forward and reflected power direct digital readout, without any calibration.
2. Maximum measurable power range up to 120W.
3 low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
4.Build in Frequency counter . 5. All Funtion display ( Frequency,Power , SWR,FW,RW,Battery Level)
Specifications:
Frequency range: 1025 - 525MHz
Measurable power range: 1 - 120W(+-0.5%)
Input Frequency counter (min 0.5 W input)
Maximum power: 120W
Impedance: 50
Size: W 76 X H 77 X D35 mm.
Weight: < 220 grams
Battery : 3.7V Li-ion
Rechargeable Battery Interface: SO239
Interface MAX. Power in: 120 W (Measurable power,Radio must be ANALOG)
V.S.W.R: 1.00~19.9
Frequency Ranger:
COVER : 100MHz~520MHz
Insertion Loss: < 0.15dB(VHF) , < 0.25dB(UHF)
Temperature: 0~60
Frequency counter: Yes ( TX input must be minimum 0.5W + - 0.5%)
Battery Voltage Display: Yes
Battery Build-in: 3.7V 900MAH (14500 Li-ion Rechargeable)
Auto Power Off: 1-9 mins
Size: 66*68*37 (mm)
Charger in: 5V (micro usb)
Backlight: AUTO OFF 1-9 mins
Interface (in and out ): SO239
Weight: 220g (include battery)
7. Surecom SW-102 SW102 125-525Mhz Digital VHF/UHF Antenna Power & SWR Meter+MF Connector
Feature
Maximum measurable power range up to 120W.low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter.
VSWR. Forward and reflected power direct digital readout, without any calibration.
will ship with a SL16 to SMA-F and SL16 to SMA-M connector
Description
DescriptionVSWR. Forward and reflected power direct digital readout, without any calibration.
Maximum measurable power range up to 120W. low insertion loss (0.3 decibels or less) structure allows it to be permanently connected.
Build in Frequency counter.
All Function display ( Frequency, Power, SWR, FW, RW, Battery voltage)
Functions
Frequency range: 100 - 520MHz
Measurable power range: 0 - 120W
Input Frequency counter
Maximum power: 120W Accuracy: mean + / - 5%
Impedance: 50
Battery : 3.7V Li-ion Rechargeable Battery
Interface: N-J Interface
Size: 66*68*37 (mm)
Weight: 220g
Specification
MAX. Power in: 120 W
V.S.W.R: 1.00~19.9
Frequency Ranger: COVER 100MHz~520MHz
Insertion Loss: < 0.15dB(VHF) , < 0.25dB(UHF)
Temperature: 0~60
Input Frequency counter: Yes
Battery Voltage Display: Yes
Battery Build-in: 14500 Li-ion Rechargeable
Auto Power Off: 1-9 mins
Charger in: 5V (micro usb)
Backlight: AUTO OFF 1-9 mins
Interface (in and out ): N(SL16)
Version: 4.5
Connect the Output of your transceiver to "TX" and Antenna or Load to "ANT". Proper adaptor/cable is required if your device has different type of connectors.
1) Adj. RF Forward %
Press 2 second the [Red button] to power on or power off Function Memory SAVE
1 Press MENU (Blue button)
2 Press F1 (Red button) (Select 1-6 Function)
3 Press Blue button ( - ), Yellow button (+)
4 Press the Red button for 2 seconds
5 Press the Blue button to SAVE and EXIT
Package List
1x SURECOM SW-102 Meter
1x Charger Cable
1x Users Manual
8. Fumei DG-503 Digital LCD 3.5" SWR/Watt Meter HF 1.6-60MHz & VHF/UHF 125-525MHz 1-200W for Two-Way Radio
Feature
Large LCD (3.5") display for easy of readingForward/Reflected/VSWR ration in one push button
Support measurement of HF/VHF/UHF frequency range
Convenient connection and control layout and for ease operation
High accuracy: (AVG) +/- 5% & Low insertion loss: < 0.3dB
9. Power SWR Meter Digital VHF UHF Power SWR Meter and Frequency Counter - HF RF Meter HAM Two-Way Radio (PM-100W)
Feature
VSWR. Forward power direct digital readout, without any calibrationMaximum measurable power range up to 100W
3 seconds check your antenna SWR, also check your radio RF power watt
Easy to install handheld Radio
10. AURSINC NanoVNA Vector Network Analyzer 10KHz -1.5GHz HW V3.5 HF VHF UHF Antenna Analyzer Measuring S Parameters, Voltage Standing Wave Ratio, Phase, Delay, Smith Chart with 2.8'' Touchscreen
Feature
This is a DIY product that provides perfect vector network measurement capabilities(without case)The metal shield for tiny vector network analyzer is designed to reduce the external interference and improve the measurement accuracy
Designed a practical and simple control application on PC, you can download touchstone(SNP) files for radio design and simulation software. Added a case, which is protective and dust-proof. Disply: 2.8 inch TFT (320 x240)
The default firmware of AURSINC Nanovna main function is used for antenna performance measurement. The TX/RX method can measure the complete S11 and S21 parameters. If you need to obtain S12 and S22, you need to manually replace the transceiver port wiring
Package include NanoVNA host (with battery)(without case) x1, USB Type-C data cable x1, 30mm SMA male to male RG174 RF cable x2, SMA simple calibration kit x1, SMA female to female connector x1
Recent Comments