10 best traxxas slash brushless motor gearbox transmission for 2022

It’s not that easy to choose the right traxxas slash brushless motor gearbox transmission since there’s a ton of things you need to consider first. Some of the factors we paid attention to in our evaluation when reviewing the top traxxas slash brushless motor gearbox transmission on the market. Through our research, weve looked through catalogues to pick out the very best for you. Through our comparison table, in-detail reviews of each product, were going to reveal the name of our best traxxas slash brushless motor gearbox transmission on the marketbut dont skip to the end!

Best traxxas slash brushless motor gearbox transmission

Product	Features	Editor's score	Go to site
	Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue		Go to amazon.com
	BANDIT VXL VELINEON 3500 VXL BRUSHLESS MOTOR RUSTLER SLASH #3351R TRAXXAS #24076-3		Go to amazon.com
	Traxxas 2388X Complete Planetary Gear Differential with Steel Ring Gear		Go to amazon.com
	Traxxas 6878 Slipper Clutch (Complete)		Go to amazon.com
	Traxxas Slash, Stampede, RUSTLER 2WD BRUSHLESS OR Brushed 272 Magnum Complete Transmission and Slipper Clutch Parts for Assembly		Go to amazon.com
	Slash 58034-2-86T Tooth Spur Gear amp 23T Pinion Gear Set 48P Traxxas		Go to amazon.com
	Traxxas 1/10 Slash 2WD TITAN 12T BRUSHED 550 MOTOR & 19T PINION GEAR		Go to amazon.com
	Traxxas 3691A Left and Right Gearbox halves (grey) with Idler Shaft		Go to amazon.com
	Traxxas 7575X Brushed Motor 370 (28-Turn)		Go to amazon.com
	GoHobby Aluminum Gearbox Case Transmission Case Housing with Motor Plate and Arm Mounts for 1/10 Traxxas Slash 2WD Rustler Stampede Bandit Replace of 3691		Go to amazon.com

Related posts:

1. Traxxas 5830 Low-CG Conversion Kit for 1/10 Scale Slash 2WD, Blue

Feature

Complete Low Center-of-Gravity chassis conversion kit for 2WD Slash models
Lowers chassis one inch (33mm/1.3in); over 45% lower battery position
Low center of gravity enhances handling and increases cornering speed
Includes chassis, lower chassis, Nerf bars (2), battery hold-down; front and rear battery retainers, and front shock springs
Complete kit, no additional parts required
Lowers chassis one inch (33mm/1.3in)
Over 45% lower battery position
Genuine Traxxas quality and precision

Description

Traxxas now offers a complete Low Center-of-Gravity chassis conversion kit for 2WD Slash models. The Low-CG Conversion Kit lowers the chassis, battery and electronic components to bring all the advantages of a low center of gravity to the 2WD short-course trucks including the Slash, Raptor and Robby Gordon Edition Dakar Slash. No matter where you want to race, on the track or off, you will experience superior handling and better corner speed. The conversion kit includes all the parts and hardware required to convert one 2WD Slash to the Low-CG configuration.

2. BANDIT VXL VELINEON 3500 VXL BRUSHLESS MOTOR RUSTLER SLASH #3351R TRAXXAS #24076-3

Feature

Genuine Traxxas Replacement Parts
Will fit many 4wd Traxxas 1/10 models: Slash, Stampede, Rally, Rustler, Bandit...
NOT compatible with older style traxxas 3355X ESC
Traxxas recommends this motor to be used with matching ESC: 3355r

Description

Removed from brand new RC model kit. Never used. Will come in our OEM packaging. SPECIFICATIONS: Type: Sensorless brushless RPM/volt: 3500 (10-turn) Wire size: 12-gauge Maxx Cable Max RMP: 50, 000 Weight: 9.24 oz (262g) Current Ratings: 65A constant / 100A peak/burst Magnet type: Ultra High-Temp. Sintered Neodymium Connection type: Solder tab / TRX 3.5mm Bullet

3. Traxxas 2388X Complete Planetary Gear Differential with Steel Ring Gear

Feature

Complete planetary gear differential with steel ring gear and hardware
Fits electric Bandit, Stampede, Rustler, and Slash 2WD
Replaces worn or damaged parts
This product is made from high quality materials and designed for lasting performance
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles

4. Traxxas 6878 Slipper Clutch (Complete)

Feature

Complete slipper clutch assembly for Traxxas 1/10 scale 4x4 models
Pre-assembled with 54-T, 32-pitch spur gear installed
Replaces entire clutch assembly
Accepts #6893X optional bearing adapter for high-power applications
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles

5. Traxxas Slash, Stampede, RUSTLER 2WD BRUSHLESS OR Brushed 272 Magnum Complete Transmission and Slipper Clutch Parts for Assembly

Feature

THIS IS A TRAXXAS 272 MAGNUM TRANSMISSION WITH COMPLETE SLIPPER CLUTCH ASSEMBLY FOR YOUR 2WD SLASH
COMES WITH SPUR GEAR 4690, SLIPPER CLUTCH 5552X, SLIPPER PRESS PLATES 5556, BEARING 5116, SCREWS 2554, DUST COVER 3792 TOTALLY ASSAMBLED AND READY TO SCREW INTO PLACE

6. Slash 58034-2-86T Tooth Spur Gear amp 23T Pinion Gear Set 48P Traxxas

7. Traxxas 1/10 Slash 2WD TITAN 12T BRUSHED 550 MOTOR & 19T PINION GEAR

Feature

Titan 12 T 550 Motor (Part # 3785) Includes Two (2) Capacitors and Two (2) Leads with Connectors Specifications Can Diameter: 1.25" (38mm) Shaft Diameter: 0.12" (3mm) Length Including: Shaft 3.2" (81mm) Length Not Including Shaft: 2.3" (57.5mm) Input Battery Voltage: Up to 8.4v Pinion Gear 19T (48 Pitch) with Set Screw (Part # 2419)Buyer agrees to contact manufacturer for all warranty replacements. No term warranty provided by Dollar Hobbyz. No liability shall b
Includes: Titan 550 12T Motor (Part # 3785) 48P 19T Pinion Gear w/Set Screw - Steel (Part # 2419) - This product is NEW in OEM Retail Packaging.
Important Note: The first image is for illustration purposes only. Please refer to the product description for exact contents.
Requires Assembly: This product is NOT ASSEMBLED. Any assembly pictured is for illustration purposes only.
Part number(s) included (in factory packaging): 3785 2419

8. Traxxas 3691A Left and Right Gearbox halves (grey) with Idler Shaft

Feature

Left and right gearbox halves
Grey plastic
Includes idler gear shaft
Use Traxxas stock and hop-up replacement parts to get the most out of you Traxxas RTR vehicles!
This product is made from high quality materials, and designed for lasting performance.
This is for use on RC vehicles such as the Traxxas Rustler, consult your user's manual for exact parts listings.

9. Traxxas 7575X Brushed Motor 370 (28-Turn)

Feature

Replacement 370 brushed electric motor (28 turn)
Fits LaTrax 1/18 scale vehicles
Ready to install with pre-soldered bullet connectors
Direct OEM replacement
Use Traxxas stock and hop-up replacement parts to get the most out of your Traxxas RTR vehicles

10. GoHobby Aluminum Gearbox Case Transmission Case Housing with Motor Plate and Arm Mounts for 1/10 Traxxas Slash 2WD Rustler Stampede Bandit Replace of 3691

Feature

Alloy Gearbox Housing Only, Do not contain Gears, shafts, or bearings, slipper, spur gear, etc.
The Alloy works with: Traxxas Bandit Electric, Rustler VXL Velineon Brushless, Rustler XL-5, Slash 2WD all versions, Stampede Electric, Stampede VXL, Stampede XL-5.
Top-Quality Materials & Superb Craftsmanship
CNC machined 6061 aluminum motor plate with added motor heat sink, Longer motor mounting slot to accommodate a greater gear ratio range.
Gohobby Quality Guarantee- 100% custumers satisfaction warranty

Conclusion

By our suggestions above, we hope that you can found the best traxxas slash brushless motor gearbox transmission for you. Please don't forget to share your experience by comment in this post. Thank you!