bushings press buyer’s guide for 2019
We spent many hours on research to finding bushings press, reading product features, product specifications for this guide. For those of you who wish to the best bushings press, you should not miss this article. bushings press coming in a variety of types but also different price range. The following is the top 10 bushings press by our suggestions:
Best bushings press
1. ABN Ball Joint Press 10pc Set Ball Joint Tool, Bushing Removal Tool Service Tool Kit with 4-Wheel Drive 4WD Adapter
Feature
EASILY PULL PARTS: Use the ABN Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicleBUILT TO LAST: Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion
FITS YOUR VEHICLE: Compatible with most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints
EASY STORAGE: Ball joint tool / bushing removal toolkit is enclosed inside a heavy-duty 11" x 3" x 15" inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization
PACKAGE CONTENTS: Package includes (1) C-frame press and forcing screw, (3) installation adapters with cups, (3) removal adapters with cups, (3) receiver tubes - 2.75" x 3", 2.25" x 2.5", 1.75" x 2", and (1) carrying case for your convenience
Description
Everything you need to service ball joints on your vehicle is included in the ABN Ball Joint Press & Adapter Set. With this kit, you can effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle. All parts are constructed from forged steel with a black-oxide finish on the adapters for maximum strength and longevity that resists rust and corrosion. We recommend a 7/8-inch or 22mm socket to turn the C-clamp and spare steel plates or large washers to help when space is tight. This package includes (1) C-frame press and forcing screw, (3) installation adapters with cups, (3) removal adapters with cups, (3) receiver tubes, and (1) carrying case. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.2. OrionMotorTech Heavy Duty Ball Joint Press & U Joint Removal Tool Kit with 4x4 Adapters, for Most 2WD and 4WD Cars and Light Trucks
Feature
🔴 ESSENTIAL TOOL FOR BALL JOINT SERVICE ---- Use the ORION MOTOR TECH Ball Joint Press Set Ball Joint Tool / Bushing Removal Tool with 4WD Adapter to effortlessly remove press fit parts including ball joints, U-joints, brake anchor pins, and more on most 2-wheel drive (2WD) and 4-wheel drive (4WD) vehicles without removing the control arm from the vehicle.🔴 PROFESSIONAL GRADE QUALITY AND DURABILITY ---- Off road weekend warriors, novices, and professional mechanics trust the ORION kit because ORION MOTOR TECH sources the highest quality components from around the world. Constructed from heavy-duty forged steel with black-oxide finish on adapters for maximum strength and longevity that resists rust and corrosion.
🔴 UNIVERSALLY COMPATIBLE WITH A WIDE RANGE OF VEHICLES ---- Fit most American domestic and imported 2-wheel drive (2WD) and 4-wheel drive (4WD) cars and light pickup trucks that have press-fit type ball joints, include 4-wheel drive (4WD) adapter that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).
🔴 CONVENIENTLY ORGANIZED IN CUSTOM MOLDED CASE ---- Ball joint press / bushing/ removal tool kit is enclosed inside a heavy-duty 11" x 3" x 15" inch (27.9cm x 7.6cm x 38.1cm) plastic blow-molded carrying case with handle for easy storage, safe storage, and quick organization. Package include: 3x Receiving Tube, 1x Removal Adapter, 1x Installation Adapter, 1x Screw, 1x Install Cup Adapter, 1x Forcing-screw Press, 1x Receiving Cup, 1x Installing Cup.
🔴 BACKED BY LIFETIME WARRANTY ---- All ORION MOTOR TECH automotive tool kits are heavy duty, professional grade, so it's easy to stand behind everything we sell. ORION's customer service is second to none. Buy confidently knowing that your 4x4, car, or truck is in good hands.
Description
Try our brand new Ball Joint Service Tool and Master Adapter Set which includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes with blow molded carrying case, making it easier to keep the tools organized and easy to transport.Specifications:
Package Dimensions: 11.8" x14.0" x 3.54"
Package Weight: 18.1lbs
Materials: Carbon Steel
Three Receiving tubes sizes:
2-3/4" x 3"
2-1/4" x 2-1/2"
1-3/4" x 2"
Package includes:
10 Pieces Ball Joint Service Tools and Master Adapter
1x Molded Case
3. OrionMotorTech Universal Ball Joint Service Kit, Ball-Joint Press U-Joint Puller Removal Separator, Upper & Lower Control Arm Bushing Tool
Feature
Solid Carbon Steel Construction with Anti-Rust Finish, Durable and VersatileDesigned to Remove and Replace Press-Fit Upper and Lower Ball Joints
All-in-One Set Includes: All Receiver Tubes, Removing/Installing Adapters etc.
Forged C-Frame Press Can be Used to Remove and Replace Universal Joints
Blow Molded Case Keeps the Tools Securely Organized and Easy to Transport
Description
Try our brand new Ball Joint Service Tool and Master Adapter Set, which includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes with blow molded carrying case, making it easier to keep the tools organized and easy to transport.Specifications:
Package Dimensions: 24.0" x 19.69" x 4.72"
Package Weight: 33.3lbs
Materials: Carbon Steel
Package includes:
21 Pieces Ball Joint Service Tools and Master Adapter
4. Astro 7865 Ball Joint Service Tool Kit with 4-wheel Drive Adapters
Feature
Heavy duty forged steel tool and set is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pinsWill remove rusted and corroded parts
Set contains C-frame press, 3 receiver tubes sizes: 2-3/4"x3"", 2-1/4"x 2-1/2" & 1-3/4"x2", installation and removing adapters
Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles)
Blow molded case for easy storage and transport
Description
Astro Pneumatic's 7865 Ball Joint Service Tool with 4-wheel Drive Adapters is a heavy duty forged steel tool and set that is excellent for removal/installation of press-fit parts such as ball joints, universal joint and truck brake anchor pins, even removing rusted and corroded parts. Astro 7865 contains a C-frame press, 3 receiver tubes sizes: 2-3/4x3", 2-1/4x 2-1/2 & 1-3/4x2, installation and removing adapters. The Set also includes 4-wheel drive ball joint service kit that allows service for 1967 thru current 1/2 and 3/4 ton 4WD vehicles having the Dana 30 or 44 front axle (found on Ford, GM, Dodge, IHC and Jeep vehicles).5. Alltrade 648617 Kit #46 Master Ball Joint / U-Joint Service Tool Set - 23 Piece
Feature
Removes and installs pressed-in type ball joints found on most vehiclesChanges ball joint without removing control arm from the vehicle
Tools can also be used to remove and install U Joints
Remove and install pressed-in Ball Joints found on most vehicles
Remove and install special threaded upper Ball Joints found on many Chrysler vehicles
Allows changing the ball joint without removing the Control Arm from the vehicle
Tools can also be used to remove and install U Joints
Kit includes step-by-step usage instructions
Description
Look no further for a perfect tool set to install and remove vehicle ball and U joints. The Powerbuilt Ball Joint & U Joint Service Set includes 23 tools perfect for working with pressed-in type ball joints found on most vehicles. It saves you work by letting you change ball joints without removing control arm from the vehicle. This set includes receiving and installing tubes, cups, and adapters, and all the accessories you'll need to get the job done. Carry case includes usage photos and instructions. Meets or exceeds ANSI standards. Lifetime warranty. This set includes: - Plug:OD 7/8" - Receiving Tube: OD 2-1/4" ID 2", 2"- Installing Tube: OD 2" ID 1-3/4", 3" - Receiving Tube: OD 2-1/2" ID: 2-1/4", 1-1/2" - Receiving Cup: OD 2 -1/4" ID 1-7/8", 7/16" - Receiving Tube: OD 2 1/2", 2-1/4", 3/4" - Receiving Tube: OD 2-7/16" ID 2-3/16", 3-3/16" - Remover/installer: OD 1-7/16" ID 3/4", 1" - Installing Tube: OD 2" ID 1-3/4", 2-5/16" - Receiving Cup: OD 2-1/8 ID 1-3/4", 1/2" - Receiving Tube: OD 2-1/2" ID 2-1/4", 2-3/4" - Receiving Tube: OD 3" ID 2-3/4", 2-1/4" - Receiving Tube: OD 2-3/4", ID 2-7/16", 2-1/4"- Receiving Tube: OD 2-7/8" ID 2-5/8", 2-7/8" - Screw -C-frame - Receiving Tube: 1-3/4" X 2" - Receiving Tube: 2-1/4" X 2-1/2" - Receiving Tube: 2-3/4" X 3" - Removal Adapter - Install Adapter 3/4"dr. X 1-59/64" - Install Adapter 3/4"dr. X 2-9/64"- Blow Molded Case -Removes and installs pressed-in type ball joints found on most vehicles -Changes ball joint without removing control arm from the vehicle -Tools can also be used to remove and install U Joints -Carry case includes usage photos and instructions -Meets or exceeds ANSI standards6. Astro 7897 Ball Joint Service Tool Kit and Master Adapter Set
Feature
Removes and replaces press-fit upper and lower ball jointsForged C-frame press alone can be used to remove and replace universal joints
Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles
Blow molded case keeps the tools organized and easy to transport
Made of carbon steel
Description
Astro Pneumatic's 7897 Ball Joint Service Tool and Master Adapter Set includes all the receiver tubes and removing/installing adapters needed to work on press-fit upper and lower ball joints on most GM, Ford, and Dodge 2 and 4 wheel drive pickups, vans and sport utility vehicles. Comes in blow molded carrying case, keeping the tools organized and easy to transport.7. OEMTOOLS 27212 Manual Bushing Installation and Removal Tool Set
Feature
Reduces the possibility of damaging the bearing/suspension housingsSupplied with four stepped end plates and four force screws in carry-case;
Plates and sleeves can also be used in a standard workshop press when on site access isn't possible;
Comes with 20 cups and receivers for 100's Combinations
Sleeve wall thickness: 5mm, sleeve height: 94mm;
Description
Comprehensive kit for fast and effective removal/installation of wheel bearings/suspension bushings and seals. Allows the technician to service a wide range of bushings without removing components from the vehicle. Works on silent bearings, hydraulic bearings, ball bearings, shaft seals, rubber bearings, etc.8. Powerbuilt 648604 Kit 25 Upper Control Arm Bushing Service Tool Set for Ford, GM and Chrysler
Feature
Made to be the most reliable tools in the market todayTool solutions for most all situations
Built to exceed tool standards
11-Piece tool set for removing and installing press-in bushings
Allows changing the press-in bushings without removing the control arm
For use on rear wheel drive Ford, GM and Chrysler vehicles
For use on autos only - Not designed for trucks
Storage case includes usage photos
Description
Powerbuilt by Alltrade Tools LLC is a global leader in the design, manufacturing and marketing of tools and shop equipment. Founded in 1979, the Long Beach, California based firm is privately held, with global manufacturing and sales facilities serving customers on every continent. The company's mission statement: Alltrade designs, markets and supplies tools and shop equipment that meet and exceed our customers' expectations of quality, service and value, while achieving profits to ensure the Company's and its employees' future growth and development. Alltrade offers our customers innovation, flexibility and speed to market.9. 8milelake 14 Piece Master Ball Joint Service Adapter Set for Ball Joint Replacement and Repair - 2WD and 4WD Cars, Trucks and SUVs
Feature
This Ball Joint Service Tool Set is excellent for the removal and installation of press-fit upper and lower ball joints, U-joints, and truck brake anchor pins.Made from high carbon steel with a black oxide finish, this set will work on GM, Ford, Dodge pick-ups, vans and SUVs through 1997 and is excellent for removing even the most rusted and corroded ball joints.
Works on press-fit upper and lower ball joints
Includes all the receiving tubes and removing/installing adapters needed to work on most GM, Ford and Dodge 2-wheel and 4-wheel drive pick-ups, vans and sport utility vehicles through 1997
Package includes: 13 adapters (sizes 3", 2-1/2", 2-1/4", 2-1/8", 2-2/3", 2", 1-3/8", 2-1/2", 2", 2-7/8", 2-1/4", 2-1/2", 2-1/2") and the pin is 5/8" diameter, one carry case for easy storage.
Description
Features:This Tool kit is designed to provide adaptors for all cars, vans, and light trucks with press fit type ball joints.
Screw cup:
7/8" 0D x 3"
Receiving cup:
1-3/4" ID x 2-1/8" OD
1-13/16" ID x 2-1/4" OD
Installing tube:
1-3/4" ID x 2" OD
1-3/4" ID x 2" OD
Remover / installer:
3/4" ID x 1-7/16" OD
Receiving tube:
2" ID x 2-1/4" OD x 2" L
2-1/4" ID x 2-1/2" OD x 1-1/2" L
2-1/4" ID x 2-1/2" OD x 3/4" L
2-1/4" ID x 2-1/2" OD x 2-3/4" L
2-3/4" ID x 3" OD x 2-1/4" L
2-7/16" ID x 2-3/4" OD x 2-1/4" L
2-5/8" ID x 2-7/8" OD x 2-7/8" L
2-3/16" ID x 2-7/16" OD x 3-3/16" L
10. RAM-PRO Ball Joint Press Service Repair Kit, Removal Tool Set, 2/4 Wheel Drive Vehicle Remover Installer Adapters Also Used to Remove/Install Brake Anchor Pins and U-Joints (10 Pcs)
Feature
The Ram-Pro 4-in-1 Ball Joint Removal Tool Kit is specially designed for use on All Cars and Light Trucks Tires that have Press-fit type ball joints, and it will help remove & install ball joint bearings without the need to remove the control arm from the vehicle.YOU GET: C-Frame Ball Joint Press - Jackscrew - 3 Receiving Tubes - Install Adapter - Remove Adapter - Installing Cup - Receiving Cup - Install Cup Adapter - and Durable Storage Case. - Please see Description below for detailed Product Dimensions.
DESIGN: Made for all types of Cars, Vans and Trucks that have press-fit type of joints, and will do the same great job on U Joints and Air Brake Anchor Pins - Will easily remove Rusted and Corroded Parts - Perfectly designed for 2WD and 4WD Vehicles.
QUALITY: Made from Solid Crafted Heavy Duty Drop-Forged Steel to improve Strength & Durability, Black Oxide-Treated Adapters to resist Corrosion and Rust. Heavy Duty Sturdy Auto Parts that will last through the toughest repair jobs consistently.
EASY TO USE: From Beginner to Professional Mechanics This 4-in-1 joint repair kit will remove & install upper and lower ball joints, universal joints, and truck air brake shoe anchor pins. Easy-to-understand Operating Instructions are included inside. Comes in a Blow Molded Case for safe & easy transport and Storage.
Description
About Ram-Pro Auto Ball Joint Replacement Puller Kit The Problem: Detecting a bad Ball Joint or Truck Brake Anchor Pin and having to replace it is always a headache and most importantly an enormous expense. Our Solution: 1 Extractor Kit and Installation Tool for 4 Applications! With this Complete Joint Set you will be able to: Remove Upper/Lower Ball Joints.Install Upper/Lower Ball Joints.
Remove/Install Brake Anchor Pin.
Disassemble/Assemble Universal U Joints. SPECS: 1 Ball joint Press (C-Clamp).
1 Jackscrew (Forcing C-Screw).
Receiving Tube #1 2.25 L x 2.72 Inside x 3" Outside.
Receiving Tube #2 1.75 x 2.25 x 2.5".
Receiving Tube #3 1.75 x 1.75 x 2".
Install Adapter 1.12 x 0.94 x 3".
Remove Adapter 1.14 x 0.5 x 3".
Installing Cup 3.67 x 1.75 x 2".
Receiving Cup 2.5 x 2 x 2.25".
Install Cup Adapter 0.84 x 1.87 x 2.25".
Carrying Case COMPATIBILTY: Compatible with all Cars, Vans and Trucks that have press-fit type upper and lower ball joints.
Perfect for 4-Wheel Drive ball joint service/repair (for 1967 thru current 1/2 and 3/4 Ton 4WD vehicles having the Dana 30 or 44 Front Axle).
Make sure you clean out the ball joint area before installing the new spherical bearings.
Remember to grease the threads before use, it makes it a lot smoother.
STORAGE:
Comes in a Heavy Duty Blow Molded Case to protect Components on transports and for a convenient Storage. Buy this Kit and Save a Ton of Money! Kit Pays for Itself with One Use!
Recent Comments