e3 miner buyer’s guide for 2019
We spent many hours on research to finding e3 miner, reading product features, product specifications for this guide. For those of you who wish to the best e3 miner, you should not miss this article. e3 miner coming in a variety of types but also different price range. The following is the top 10 e3 miner by our suggestions:
Best e3 miner
1. I-Miners Cooler Fan Simulator Emulator for Antminer S9 D3 L3+A3 T9 Z9 E3 Oil 3M Novec - Pack of 2
Feature
Included: 2 x I-MinersSmall neat device without cables
Designed to trick any Bitmain Antminer Fan (or server/other device) into spinning at full speed
You can completely remove fans if you are cooling your device with immersion cooling (oil or 3M Novec)
Does not need configuration
2. Bitmain Antminer E3 190MH/s Ethereum Ethash ETH Miner Mining Machine Include Bitmain APW7 PSU Power Cord
Feature
World first ASIC Ethash Ethereum ETH Mining MachinePower consumption: 760W 10%, include Bitmain Antminer APW3++ and power cord
Mining Hash Rate: 190MH / s
Most Powerful Efficient Eth Miner
Total quantity of hash chips 18 PCS
Description
Special provisionBreaking down cryptocurrencies involves financial risks. These risks may relate to changes in the exchange rate of the cryptocurrency or to changes in the algorithm used to mine the cryptocurrency. Please consider carefully before you make a purchase, as we do not accept refund requests for orders of this batch.
Description
1.Mining Hash Rate: 190MHs
.
2. Power Consumption:760W 10 %.
.
3. Power Efficiency: 4 J/MH +4%.
.
4. ASIC Chip: 18 PCS Hash chips.
.
5. Dimensions: 399mm ( L) * 130mm (W) * 128mm (H).
6. Weight: 10.5 kg
.
7. Networking connection mode: Ethernet Cable
3. Bitmain Antminer E3
Feature
Ethereum ASIC MinerHashing Rate: 190 MH/s 5%
Power Consumption: 800W 10%
Built-in Web Management Portal - No Separate Host Computer or Software Required
Power Supply Sold Separately (AntMiner APW3++ PSU Recommended)
Description
*POWER SUPPLY IS NOT INCLUDED* Bitmain recommends using the APW3++ power supply for those with 110v or 220v power sources. Specifications: 1. Hash Rate: 190 MH/s 5% 2. Power Consumption: 800W 10% 3. PCIe Power Connectors: 7 (two per Hashing board and one for the controller) 4. Dimensions: 400mm*130mm*329mm(H) 5. Network: Ethernet cable is not included Notes: 1. Due to the nature of these products, there are higher than normal restocking fees (typically 40%). The warranty will be voided by overclocking. 2. The AntMiner E3 requires SEVEN 6-pin PCI-e connectors. There are three hash boards that each require TWO 6-pin PCI-e power connectors and one additional 6-pin PCI-e power connector on the controller. All SEVEN 6-pin PCI-e power connectors are required. Do not connect more than one PSU to the same hashing board! 3. Power consumption figures will vary with your PSU's efficiency, the ambient operating temperature and the accuracy of the power meter. 4. Power supply unit is not included. Bitmain recommends the APW3++ for those with 110v or 220v power.4. Cooling Fan for Antminer Bitmain 6000RPM Dual Ball Bearing 4-pin Connector, 120x120x3.8mm / Works for S9i, S9j, S9, S7, S5, V9, T9, A3, D3, L3+, L3++, E3, Z9, Z9 Mini. Also for GPU Miners
Feature
Works for Bitmain Antminers S9i, S9j, S9, S7, S5, V9, T9, D3, A3, L3+, L3++, E3, Z9, Z9 mini, X3 and more. Also works for GPU miners120*120*3.8mm /// SHLF1212CHE-03
Speed: 6000RPM / Dual Ball Bearing
Material: Plastic Connector: 4 Pin
Cable Length: 10 inches / 25 cm
Description
Brand New Antminer Bitmain Fan Replacement Dual Ball Bearing / Works for S9i, S9j, S9, S7, S5, V9, T9, D3, A3, L3+, L3++, E3, Z9, Z9 mini, X3 and more. Also works for GPU miners / 120*120*3.8mm /// SHLF1212CHE-03 / Cable Length: 10 inches / 25 cm / 3 Month Warranty5. BitcoinMerch.com White Magnetic Fine Fan Filter (fits Antminer S3, S5, S5+, S7, S9, T9, T9+, L3+, L3++, A3, E3, X3, B3, V9, D3) (White)
Feature
Keeps bugs and dust away from your expensive mining equipment.Deigned for operating 24/7 with latest miners from Bitmain.com.
Fits Antminer S3, S5, S5+, S7, S9, T9, T9+, L3+, L3++, A3, E3, X3, B3, V9, D3.
Magnetic backing - no screw needed. No need to void warranty. Snap it on the back of the miner and you are done.
Reusable - re-washable. We recommend to check and clean filter regularly.
Description
Keep out dirt, bugs or anything else from entering your Antminer. The filter is designed to be attached to the back of the unit where the air comes in from. It's magnetic backing make it an effortless way to protect your investment miners - they do not require any screwing in, so you don't have to take your Antminer apart. Just install it in the back of the miner (where the airflow comes in to the miner) and the magnetic backing will attach to the back metal fan guard. Fits: Antminer S3, S5, S5+, S7, S9, T9, T9+, L3+, L3++, A3, E3, X3, B3, V9, D3 and any 6" 120mm fan sizes. Washable and reusable. Gentle hand wash only. Do not bend, do not wash in a washing machine. Clean every couple of weeks or when dust appear.6. 120mm to 4 Inch Fan Shroud for Antminer S1 S3 S5 S7 S9 S9i L3+ L3++ E3 T9 D3 A3 V9 X3 Duct Cooling Vent Hose Exhaust Adapter Converter for Bitmain Miner Bitcoin Crypto
Feature
Perfect for redirecting heat to increase the efficiency by lowering internal temperatureCreated to fit the standard 120mm fan & screws that come with any Bitmain Antminer
Connect the other end to a 4 inch vent hose or any other ducting accessory
Solid back wall with 200mm layer height & made with 100% Black ABS plastic
Proudly designed & manufactured in Canada
Description
120mm to 4 Inch Fan Shroud for Antminer S1 S3 S5 S7 S9 L3+ E3 T9 D3 A3 V9 X37. 10 Units of Bitmain Antminer Power Cable Cord Heavy Duty 3ft 14 AWG NEMA 6-15P to C13 Power Cord Rated up to 15A 250V NEMA 6-15P cUL CSA (Black)
Feature
Works for Bitmain Antminers APW3++ / S9 T9 S9i V9 A3 D3 L3+ L3++ E3 Z9 Ethereum Miners Ethereum Classic Zcash Zencash Miners10 Units of Male Plug: NEMA 6-15P / Female Receptacle: IEC60320 C13
14 AWG 3 Conductor Wire SJT black wire - Rated up to 15A 250V
3 feet long with cUL and CSA approvals
Works for all ASIC and GPU miners like S9, S9i, S9j, Z9, A3, L3+, L3++, D3, E3, T9, V9, X3, and all older models. Also for Innosilicon and all Miners
Description
10 Units - FREE AND FAST PRIORITY SHIPPING IN THE US * Male Plug: NEMA 6-15P * Female Receptacle: IEC60320 C13 * 14 AWG 3 Conductor Wire SJT black wire * 3 feet long with cUL and CSA approvals * Rated up to 15A 250V8. 5 x HEAVY DUTY Power Cord 220-250v UL 14 AWG 6-15P Works for BITMAIN ANTMINER
Feature
5 Units of Male Plug: NEMA 6-15P - Rated up to 15A 250V For Hospital Equipments and Heavy Duty Equipment that require High VoltageFemale Receptacle: IEC60320 C13 / 6 feet long with cUL and CSA approval
14 AWG 3 Conductor Wire SJT black wire
Works for all ASIC and GPU miners like S9, S9i, S9j, Z9, A3, L3+, L3++, D3, E3, T9, V9, X3, and all older models. Also for Innosilicon and all Miners
Free Same Day Priority Shipping!!! Ships same day from Florida to US states will arrive in 1 to 4 days when ordering 2 or more units
Description
5 Units of HEAVY DUTY Power Cord 220-250v UL 14 AWG 6-15P / Works for BITMAIN ANTMINER AND GPU MINERS FREE FAST PRIORITY SHIPPING 5 Thick Male Plug: NEMA 6-15P - Rated up to 15A 250V Female Receptacle: IEC60320 C13 14 AWG 3 Conductor Wire SJT black wire 6 feet long with cUL and CSA approval Free Same Day Priority Shipping!!! Ships same day from Florida We will ship these for free. NEMA 6-15P to C13 power cord: NEMA 6-15 power plug to IEC C13 with 14/3 SJT black wire, 6 feet long with cUL and CSA approvals. Rated up to 15A 250V.// We will ship these for free. 1 to 3 day Priority shipping for more than 3 units bought in 1 order. NEMA 6-15P to C13 power cord: NEMA 6-15 power plug to IEC C13 with 14/3 SJT black wire, 6 feet long with cUL and CSA approvals. Rated up to 15A 250V.9. Heavy Duty Power Cord 220-250v UL 14 AWG 6-15P, Works for BITMAIN Miner APW3++ for Antminer A3, S9, D3, L3, T9, V9 and Also ETH and Many CryptoCoin Miners
Feature
Male Plug: NEMA 6-15P - Rated up to 15A 250V For Hospital Equipments and Heavy Duty Equipment that require High VoltageFemale Receptacle: IEC60320 C13 / 6 feet long with cUL and CSA approval
14 AWG 3 Conductor Wire SJT black wire
Works for all ASIC and GPU miners like S9, S9i, S9j, Z9, A3, L3+, L3++, D3, E3, T9, V9, X3, and all older models. Also for Innosilicon and all Miners
Free Same Day Priority Shipping!!! Ships same day from Florida to US states will arrive in 1 to 4 days when ordering 2 or more units
Description
We will ship these for free. 1 to 3 day Priority shipping for more than 3 units bought in 1 order. NEMA 6-15P to C13 power cord: NEMA 6-15 power plug to IEC C13 with 14/3 SJT black wire, 6 feet long with cUL and CSA approvals. Rated up to 15A 250V.10. Heavy Duty Power Cord 220-250v UL 14 AWG 6-15P, Works for BITMAIN Miner APW3++ for Antminer A3, S9, D3, L3, T9, V9 and Also ETH and Many CryptoCoin Miners
Feature
Male Plug: NEMA 6-15P - Rated up to 15A 250V For Hospital Equipments and Heavy Duty Equipment that require High VoltageFemale Receptacle: IEC60320 C13 / 6 feet long with cUL and CSA approval
14 AWG 3 Conductor Wire SJT black wire
Works for all ASIC and GPU miners like S9, S9i, S9j, Z9, A3, L3+, L3++, D3, E3, T9, V9, X3, and all older models. Also for Innosilicon and all Miners
Free Same Day Priority Shipping!!! Ships same day from Florida to US states will arrive in 1 to 3 business days
Recent Comments