How to buy the best flasher led?
When you want to find flasher led, you may need to consider between many choices. Finding the best flasher led is not an easy task. In this post, we create a very short list about top 10 the best flasher led for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 flasher led:
Best flasher led
1. Rigid Industries (40312 3 Amp 12V LED Flasher
Feature
7 Modes3 Amps
12V DC
2 Output
Description
This 3A flasher module provides seven flashing options for your LED lighting components. It is easy to install and works off of the auxiliary switch to your lights. This model features the following modes: 1 - Single Simultaneous: Both sides flash once simultaneously, followed by a short pause. 2 - Double Simultaneous: Both sides flash twice simultaneously in quick succession, followed by a short pause. 3 - Quad Simultaneous: Both sides flash four times simultaneously in quick succession, followed by a short pause. 4 - Alternating: Alternates flashing once per side. 5 - Alternating (variable speed): Same as mode 4, but at multiple speeds. 6 - Simultaneous (variable speed): Same as mode 1, but at multiple speeds. 7 - Random: Randomly cycles through all previous modes. This model is specifically designed to be installed into a 12V electrical system only.2. CEC Industries EF32RL Electronic Turn Signal Flasher Relay, LED Compatible, 2 + Ground Wire Prongs, 12 Volts
Feature
Type: ElectronicPilot Circuit: No
Prongs: 2 + Ground Wire
LED Compatible: Yes
DOT Approved
Description
The EF32RL is an LED compatible 2-prong turn-signal flasher relay.The flasher will resolve the problem with hyper-flashing or no-flashing when you replace your stock incandescent bulbs with LED bulbs
The following features set this item apart from other LED flashers
- Works with LED bulbs AND regular bulbs, or a mix.
- Handles up to 25 Amp, so no worries when towing a trailer that has non-LED bulbs (many cheap LED flashers will burn out if you use regular bulbs)
- Audible Clicking Noise
- Constant Flash Rate, regardless of the type or number of bulbs
- DOT Approved
- Unparalleled Reliability
Installation is very simple: Remove existing 2-prong flasher, plug in EF32RL and connect the flasher's black wire to a good ground (chassis / sheet metal or other ground).
This flasher is designed for vehicles that use a 2-prong flasher with a socket wired to SAE specifications. Some vehicles are not wired correctly at the flasher socket. If you are not sure, please review the images on how to determine how your socket is wired, or read up on www.ef32rl.com, or simply order the EF32RLNP which will work regardless of how the socket is wired
3. iJDMTOY (1) 5-Pin EP27 FL27 Electronic LED Flasher Relay Fix For LED Turn Signal Bulbs Hyper Flash Fix
Feature
LED electronic flasher relay fix for turn signal blinker lights to fix hyper flash problemsOperates at 12V plus has a easy plug-n-play installation
Dimensions: 1.2" x 1.2" x 1.5" - please check to make sure size is compatible, as this flasher relay may be larger than its original counterpart
Designed for 1994-2009 Buick, Chevrolet, Chrysler, Dodge, Ford, Jeep, Lincoln, Mazda, Mercury, Oldsmobile, Plymouth and Pontiac (Note: Does not fit Jeep Grand Cherokee)
This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
This page features for a piece of 5-pin EP27 LED Electronic Flasher Relay Fix for the turn signal blinker lights.
Please note that this LED flash will only fix the LED bulb's hyper flash issue, not the wattage lower than stock bulb related "bulb out" warning message on dashboard.
This EP27 is an electronic turn signal flasher that operates at 12 V. The EP27 is an application specific flasher that is designed for 94-09 Buick, Chevrolet, Chrysler, Dodge, Ford, Jeep, Lincoln, Mazda, Mercury, Oldsmobile, Plymouth and Pontiac (Note: Does not fit Jeep Grand Cherokee) with a simple plug and play installation.
Connection Instructions
Replace the stock relay in the fuse box.
Fit
96-98 Buick Skylark
96 Chevrolet Beretta, 96-05 Cavalier, 96 Corsica
01-02 Chrysler Prowler
98-00 Dodge Dakota, 99-00 Durango, 98-02 RAM 1500, 98-02 RAM 2500, 98-02 RAM 3500, 98-02 Viper
07-11 Ford Crown Victoria, 10-11 Crown Victoria LX, 07-10 Edge, 00-05 Excursion, 97-11 Expedition, 95-10 Explorer, 97-08 F150, 97-10 F250/F350/F450 Super Duty, 05-07 Five Hundred, 04-07 Freestar, 05-07 Freestyle, 05-06 GT, 94-04 Mustang, 95-11 Ranger, 05 Taurus, 08 Taurus X, 95-03 Windstar
97-01 Jeep Cherokee
03-05 Lincoln Aviator, 02 Lincoln Blackwood 2WD, 07-10 Lincoln MKX, 06-08 Lincoln Mark LT, 98-12 Lincoln Navigator, 10-12 Lincoln Navigator L, 04-11 Lincoln Town Car
01-09 Mazda B2300, 98-01 Mazda B2500, 98-07 Mazda B3000, 98-09 Mazda B4000
07 Mercury Grand Marquis, 07-11 Mercury Mariner, 04 Mercury Monterey, 97-10 Mercury Mountaineer, 05 Mercury Sable
96-98 Oldsmobile Achieva
00-01 Plymouth Prowler
96-98 Pontiac Grand Am, 96-05 Pontiac Sunfire
(Note: Does NOT fit Jeep Grand Cherokee)
4. DOCA Flasher Relay,12V Heavy Duty 2 Pin Electronic LED Compatible Turn Signal Flasher Relay- Fits Motors Turn Signal & Hazard Warning
Feature
Electronic LED Flasher Relay will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard.12V heavy duty 2 pin electronic signal flasher (blinker) relay that is a plug and play design. Maybe a resistor are required to use for the LED bulbs.
Uniserval flasher relay fit for many vehicles (1956-2002) that use a 2-prong (2PIN) flasher with a socket wired to SAE specifications.Fixed blinker speed and great for led tail lights.
Hazard warning flasher and turn signal flasher. MAX 20 AMPS & Voltage: 11-15 volts.
24 months warranty and lifetime friendly service,if any product problem please contact with us.
5. Direct Replacement 12V Speed Adjustable 2 Pin Compatible LED Electronic Flasher Relay fix CAR and MOTORCYCLE Turn Signal & Hazard Warn Hyper Flash (Black)
Feature
PLUG AND PLAY,Work to replace Most Standard Factory 2-Pin Flasher.A MUST HAVE ITEM, If You Want Upgrading Stock Bulb or Bulb to LED or for Your Exist LED Tail Lamps of Turn Signal lights.
Operating Voltage: 12V (11V-15V). Max Power: 42W. Switch Power: 0.02A to 12A. Working Temperature: -40C to +80C
SPEED ADJUSTABLE, Clockwise:SLOWER , Counter Clockwise: FASTER. Flashing Frequency: 50 times/min to 200 times/min.
Used for MOST Automotive/Motorcycle/Bike to fix the LED Bulbs Related Turn Signal Light Hyper Flashing, not Function Properly issues.
Description
2-Pin Motorcycle and Car Speed Adjustable LED Turn Signal Indicator Hyper Flasher Relay.This 2-pin Electronic LED Flasher is also speed adjustable.
Universal fit for many vehicles that use a 2-Prong (2PIN) flasher with a socket wired to SAE specifications.
Fit for Harley Davidson,Honda,Kawasaki,KTM,Suzuki,Yamaha and many other brands as well.
Connection and adjustment Instructions:
Clockwise: slower, Counter Clockwise: Faster
You can use a flat head screw driver to adjust the knob on the bottom to set its flashing speeds from 50c/m to 200c/m .
EASY to install the LED bulbs for the car and motorcycle for turn signal lights without having to cut the wires to install the load resistors, completely eliminate the LED rapid flashing problems.
Using advanced SMD chip technology,with automatic short circuit protection, automatic overload protection, reverse polarity protection automatically.Allow more stable LED work.
Tips:
1.If the flashing speed is not up to the individual requirements , flicker frequency can be adjusted to achieve the speed of requirement by adjusting the switch on the relay 2 pins flasher relay, can be fitted on most of motorcycle and car or any custom application .
2.Great for replacing a bad relay or correcting led turn signal problems (fast Flashing, no flashing).
3.Replace the stock relay in the fuse box. Please check your owner manual to locate the flasher. Pin B is power in, and Pin L is the adjustable power out.
6. Audew 2-Pin Electronic Turn Signal Flasher Relay Fix Motorcycle Turn Signal Hyper Flash
Feature
Completely waterproof design. Work for most Motorcycles such as Honda, Kawasaki, KTM, Suzuki, Yamaha and many other brands as wellDirectly replace the OEM two-pin flasher
Eliminate the need for tapping wires to install the load resistors
Allow LED bulbs to blink at the normal rate
The Max Power of the relay is 42W, which mean the power of your ( all ) LED bulbs must low than 42 W. If more than 42 W, load resistors may be required.
Description
The Max Power of the relay is 42W, which mean the power of your ( all ) LED bulbs must low than 42 W. If more than 42 W, load resistors may be required.This auction feature this 2-Pin Electronic LED Flasher Relay, works for most motorcycle/bike to fix the LED bulbs related turn signal light hyper flashing, not function properly issues. By using this 2-pin LED flasher, you can install the LED bulbs for the motorcycle/bike for turn signal lights without have to cut the wires to install the load resistors and completely eliminate the LED rapid flashing problems. Besides, this 2-pin Electronic LED Flasher is also speed adjustable. You can use a flat head screw driver to adjust the knob on the bottom to set its flashing speeds from 50c/m to 200c/m.
Operating Voltage: 12V
Max Power: 42W
Flashing Frequency: 50 times/min to 200 times/min
Switch Power: 0.02A to 12A
Operating Temperature: -40C to +80C Work to replace most 2-pin flasher
Package Included:
1 x 2-Pin Relay
About the Brand:
Brand Name: AUDEW
Our Vision : Provide the most cheap beauty products to help you upgrade your beloved vehicle and let you feel the most sincere service Your encourage is our motivation to discover the trend of fashion and create your dreaming products. Make your car outstanding , enjoy your life
7. 12V Heavy Duty 2 Pin LED Compatible Electronic Fixed Flasher Turn Signal Flasher Relay
Feature
This is a heavy duty 2 PIN 12V electronic signal flasher (blinker) relay that is a plug and play design. Maybe a resistor are required to use for the LED bulbs.Fixed blinker speed and great for led tail lights.It can fit for many cars and universal.
Sub Type: Hazard Warning Flasher, Hazard Warning and Turn Signal Flasher.
MAX 20 AMPS & Voltage: 11-15 volts & Product Dimensions 2.3 x 1.4 x 1.3 inches
If you are upgrading to LED tail lamps of turn signal lights, this is a must have item. Local parts stores carry this product for around $16-$20. Buy it here and save money!
Description
Sub Type: Hazard Warning Flasher, Hazard Warning and Turn Signal Flasher.These flashers retain the reliability of an flasher along with staying extra cool, consuming very little power and extra long lasting life.
The flasher will resolve the problem with hyper-flashing or no-flashing when you replace your stock incandescent bulbs with LED bulbs.
CAUTION: Maybe a resistor are required to use for the LED bulbs.
The following features set this item apart from other LED flashers.
Works with LED bulbs AND regular bulbs, or a mix.
Handles up to 20 Amp, so no worries when towing a trailer that has non-LED bulbs (many cheap LED flashers will burn out if you use regular bulbs)
Audible Clicking Noise.
Constant Flash Rate, regardless of the type or number of bulbs.
DOT Approved.
Unparalleled Reliability.
Installation is very simple
This flasher is designed for vehicles that use a 2-prong flasher with a socket wired to SAE specifications. Some vehicles are not wired correctly at the flasher socket. If you are not sure, please review the images on how to determine how your socket is wired.
It can fit for many cars and universal.
1993-1999 Chevrolet C1500
1996 Chrysler LHS
1988-1993 Ford F-150
Dodge
Cadillac
Chevrolet
GMC
Buick
Pontiac
Renault
Subaru
Ideal
Jeep
Lincoln
Mazda
Mitsubishi
Nissan
Oldsmobile
Honda
Please review the specifications before buying.
8. Dewhel 1 pc CF-13 CF13 EP34 3 Pin Electronic Flasher Fix 12V 0.02A-20A For LED Turn Signal Light Bulbs Hyper Blink Flash No Flash
Feature
3 pin CF13 JL-02 EP34 DC 12V LED Flasher Relay. Suitable for Turn Signal, Blinker LightNominal Voltage:12V Operating Voltage:11V...15V
Switch Current:0.02A - 20A Max. Current:20A
Terminals Number : 3 Terminals;Size : 30 x 30 x 30mm/1.2" x 1.2" x 1.2" (L*W*H)
CF13 features for a piece of 3-pin Electronic LED 12V Flasher Relay Fix for Turn Signal, Blinker Light. This will solve LED related turn signal problems such as rapid flashing, not flashing, or bulb burnt out warning on dashboard. These are designed for most 3-pin Japanese configurations. Simple Plug N' Play.
Description
The LED flasher does not replace all flasher relay. Before ordering, please make sure the 3-pin configuration is the same as your vehicle's. You can usually find your flasher pin out printed right on your flasher. Failure to check this and installation in an incompatible vehicle can blow your fuse, destroy the flasher and void the flasher warranty.9. CEC Industries EF32SS-R Turn Signal Flasher Relay, LED Compatible, 2 Prongs, 12 Volts
Feature
Type: Solid State (no click)Pilot Circuit: No
Prongs: 2
LED Compatible: Yes
Description
This 2-prong solid-state flasher has no moving parts inside, for virtually unlimited life. Unlike many other solid state flashers, this flasher has a 25A switching capacity, so it can be used with LED bulbs, regular bulbs or a mix.IMPORTANT: Since this is a SOLID STATE flasher, it does NOT make a clicking noise. Also, since this is an electronic flasher, the polarity (wiring) of the flasher socket is important: The flasher expects +12V at the X-terminal and the lights (turn-signal switch) at the L-terminal. If the unit does not flash the lights when inserted into the socket, a reversal harness (2 pieces of wire with spade connectors) is required, these can be made DIY or purchased (part number EF2C)
10. A'BLE Sho-Me 7 Pattern LED Strobe Effect Flasher
Feature
Waterproof, epoxy-sealed design for durability and long lifeFlange mount design with mounting screws included for easy installation
7 user-selectable strobe effect flash patterns
Alternating, simultaneous and random patterns up to 1200 flashes per minute
Specifications: 12 Volt DC Rated at 3 amps per side (flashes total of 12 LED lights) Measures 4"L x 2"W x 1/2"H
Recent Comments