iv tubing caps buyer’s guide for 2019
We spent many hours on research to finding iv tubing caps, reading product features, product specifications for this guide. For those of you who wish to the best iv tubing caps, you should not miss this article. iv tubing caps coming in a variety of types but also different price range. The following is the top 10 iv tubing caps by our suggestions:
Best iv tubing caps
1. ALWSCI Yellow GL45 Safety Cap with Four Holes for 1/16 Inch OD Tubing, 1pc/pk.
Feature
Cap Material: PolypropyleneCap O.D.: 53.8 mm
Cap I.D.: 51.5 mm
Cap Height: 32.5 mm
Insert Material: PTFE
Description
GL45 safety caps are made with PTFE insert inside the cap for maximum inertness on a wide variety of solvents. The GL45 cap is design with the inner body rotates independently of the outer collar to prevent twisting of tubing when the cap is removed or attached. It is design to minimize chemical evaporation. 1 pc/pk. Commonly use on HPLC solvent bottle for use with 3 semi-rigid tubing equal to 1/8 outside diameter and 1/4-28 PEEK Fitting for 1/8'' OD tubing.2. 2 1/4" SQUARE TUBING END CAP PLUG - QUANTITY OF 4
Feature
FITS 1.99" to 2.08" TUBE IDSturdy Black Plastic
Pebbled Finish
Easy to Install
Description
SQUARE TUBING PLUG/END CAP - 2 1/4; BLACK PLASTIC - QUANTITY 4 - Check our other listings for different sizes.3. 3" SQUARE TUBING END CAP PLUG - QUANTITY OF 4
Feature
FITS 2.49" to 2.64" TUBE IDSturdy Black Plastic
Pebbled Finish
Easy to Install
Description
SQUARE TUBING PLUG/END CAP - 3"; BLACK PLASTIC - QUANTITY 4 - Check our other listings for different sizes.4. 2 1/2" SQUARE TUBING END CAP PLUG - QUANTITY OF 4
Feature
FITS 2.24" to 2.33" TUBE IDSturdy Black Plastic
Pebbled Finish
Easy to Install
Description
SQUARE TUBING PLUG/END CAP - 2 1/2"; BLACK PLASTIC - QUANTITY 4 - Check our other listings for different sizes.5. 2" X 4" RECTANGLE TUBING END CAP PLUG - QUANTITY OF 4
Feature
FITS 1.732"-1.834" 3.73"-3.83" TUBE IDSturdy Black Plastic
Pebbled Finish
Easy to Install
Description
RECTANGLE TUBING PLUG/END CAP - 2" x 4" - BLACK PLASTIC - QUANTITY 4 - These are true 2" X 4" and not the metric plugs some sell as 2" X 4" that are too small!! Check our other listings for different sizes.6. 2" Black Plastic Plugs for Square Tubing by Caplugs Package of 4
Feature
Package of 4.Suitable for Gorilla Lifts, Fitness Equipment End Caps. Fencing Post End Caps. Furniture gliding caps.
Made of High-Grade LDPE. Made in the USA
Fits tubing with outside diameter of 2" .56 inch deep
Description
Series SQR Square Plugs feature a series of externally tapered ribs designed to accommodate a wide range of tubing gauges while also satisfying the fit adjustments on tubing with inside dimensional fluctuations. The exterior ribs are High-Grade to provide a sure grip inside a tube without the unsightly plastic shavings found on many straight wall glide installations. Not subject to rust or corrosion.7. (Pack of 2) 4" Square Tubing Plugs (7 - 11 Ga- for ID 3.64" to 3.76") Flexible LDPE Ridges - Heavy Duty Impact Resistant Top CAP | 4 x 4 Inches - Fencing lamp Post Finishing Inserts - Furniture Decor
Feature
(Pack of 2) 4" Square Tubing Plugs (7 - 11 Ga- for ID 3.64" to 3.76") | Flexible LDPE Ridges - Heavy Duty 0.3" Impact Resistant Tough Design Top CAP | 4 x 4 Inches - Fencing lamp Post Finishing Insert - Furniture Dcor - Fitness Eqpt End Caps || by SBD* Durable construction and excellent gliding edges. Not subject to rust or corrosion. Material: High Grade Plastic LDPE, Color: Black
* Provides clean finish on completed products. Strong Heavy Duty 0.3" thick Impact Resistant Tough Design top CAP
* High Grade LDPE Make. Flexible Ridges.
Description
(Pack of 2) 4" Square Tubing Plugs (7 - 11 Ga- for ID 3.64" to 3.76") | Flexible LDPE Ridges - Heavy Duty 0.3" Impact Resistant Tough Design Top CAP | 4 x 4 Inches - Fencing lamp Post Finishing Insert - Furniture Dcor - Fitness Eqpt End Caps || by SBD8. HUAHA 2 Pcs 150ML Large Plastic Reusable Measuring Syringe with 100cm(40") Tubing, 4 Pcs Caps, 10 Pcs Dispenser Needles
Feature
Large Plastic Hydroponics Measuring Syringe FilterEasy to inject correct amount of liquid into container.
Package includes: 2 pcs 150 ml syringe, 100 cm plastic tubing, 4 pcs storage cap, 5 pcs tapered pinhead dispenser needle 14G, 5pcs 1/2" blunt tip
Ideal for hydroponics measuring, Motoring applications and many other uses.
Description
Package includes: 150 ml plastic syringe injector + 100 cm clear tubing + 4 pcs storage cap + 5 pcs tapered pinhead dispenser needles + 5pcs blunt tipMaterial: Plastic
Syringe Diameter: about 38 mm
Tube Diameter: 8 mm Length: 100 cm
9. 2" X 3" RECTANGLE TUBING END CAP PLUG - QUANTITY OF 4
Feature
FITS 1.732"-1.834" 2.732"-2.834" TUBE IDSturdy Black Plastic
Pebbled Finish
Easy to Install
Description
RECTANGLE TUBING PLUG/END CAP - 2" x 3" - BLACK PLASTIC - QUANTITY 4 - Check our other listings for different sizes.10. HUAHA 2 Pcs 100ML Large Plastic Reusable Measuring Syringe with 100cm(40") Tubing, 4 Pcs Caps, 10 Pcs Dispenser Needles
Feature
Large Plastic Hydroponics Measuring Syringe FilterEasy to inject correct amount of liquid into container.
Package includes: 2 pcs 100 ml syringe, 100 cm plastic tubing, 4 pcs storage cap, 5 pcs tapered pinhead dispenser needle 14G, 5pcs 1/2" blunt tip
Ideal for hydroponics measuring, Motoring applications and many other uses.
Description
Package includes: 100 ml plastic syringe injector + 100 cm clear tubing + 4 pcs storage cap + 5 pcs tapered pinhead dispenser needles + 5pcs blunt tipMaterial: Plastic
Syringe Diameter: about 38 mm
Tube Diameter: 8 mm Length: 100 cm
Recent Comments