knife blanks clip point buyer’s guide for 2019
We spent many hours on research to finding knife blanks clip point, reading product features, product specifications for this guide. For those of you who wish to the best knife blanks clip point, you should not miss this article. knife blanks clip point coming in a variety of types but also different price range. The following is the top 10 knife blanks clip point by our suggestions:
Best knife blanks clip point
1. 1095 High Carbon Steel Clip Point Partial Tang Knife Blank Blade Hunting Skinning Skinner 1095HC
Feature
1095 High Carbon Steel Clip Point Partial Tang Knife Blank Blade Hunting Skinning Skinner 1095HCDimensions: 7.5 inches Approximate Overall Length, 3.25 inches Approximate Cutting Edge Length, 3.5 inches Approximate Handle Length (Push Tang), 1.25 inches Widest Part of Blade, 0.5 inches Widest Part of Handle, Approximately 4mm Thick (1/8 inch)
High quality 1095HC (high carbon) steel construction.
Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
High carbon steel has extreme durability, resistance to chipping, easy sharpening and high edge retention.
Description
This beautiful blade is custom-made from high quality 1095 steel. 1095 is a high carbon steel (not a stainless steel) and is commonly used in heavy duty tools. It can carry an extremely sharp edge. 1095 makes great steel for heavy duty choppers and survival knives because of its extreme durability and resistance to chipping, easy sharpening and edge retention. It is much tougher than premium stainless steels. Because it is a high carbon steel, it is very important to keep it clean and oiled. Take extra care to store a knife made of 1095 out of its sheath (this is a good idea for all knives) and keep a thin layer of lubricant on the exposed steel (non-black powder coated portions). This knife blank is custom designed by us and 100% hand-forged.2. Clip Point Damascus Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Feature
8.125 inches Approximate Overall Length, 4.5 inches Approximate Blade Length, 2.75 inches Approximate Handle Length, 1.13 inches Widest Part of Blank, 0.5 inches Widest Part of Handle, 4mm (1/8 inch) Thick ApproximatelyHigh Quality Damascus Construction: 1095 High Carbon and 15n20 nickel (Over 200 Layers)
Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place.
Raindrop Damascus Pattern
Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
Description
Clip Point Bowie Blade Style. This blade is handmade from 1095 high carbon steel and 15n20 alternating steel layers. The finger guard is solid brass, and comes pinned to the knife. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening. Blank filework may vary or be absent. We try to keep them all consistent but sometimes the filework may vary or be absent. 100-200 Layers of Damascus Steel. Blade comes sharpened. A final edge may be applied for an even sharper razor edge. This is a stock photo of the item. It is not the exact blank you will receive. Pin hole size(s) and locations may vary. Each damascus pattern will vary and measurements may vary as each blank is hand-made.3. Large Clip Point Damascus Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Feature
9 inches Approximate Overall Length, 5.125 inches Approximate Blade Length, 2.625 inches Approximate Handle Length (partial tang), 1.0 inch Widest Part of Blank, 0.5 inches Widest Part of Handle, 4mm (1/8 inch) Thick ApproximatelyHigh Quality Damascus Construction: 1095 High Carbon and 15n20 nickel (Over 200 Layers)
Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place.
Raindrop Damascus Pattern. Blood groove along both blade sides.
Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
Description
Upswept blade with blood groove. This blade is handmade from 1095 high carbon steel and 15n20 alternating steel layers. The finger guard is solid brass, and comes pinned to the knife. As you may know, 1095 is a traditional and sought after American high carbon steel that is prized for knife blades. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Blank may require additional sharpening. Blank filework may vary or be absent. We try to keep them all consistent but sometimes the filework may vary or be absent. 100-200 Layers of Damascus Steel. Blade comes sharpened. A final edge may be applied for an even sharper razor edge. This is a stock photo of the item. It is not the exact blank you will receive. Pin hole size(s) and locations may vary. Each damascus pattern will vary and measurements may vary as each blank is hand-made.4. (Set of 2) Knife Blade Short Clip Point Skinner Knife Making Blanks w/Guard Knives Hunting Hunter BL050
Feature
YOU WILL RECEIVE 2 BLANKS WITH THIS PURCHASE.Dimensions: 8 1/2 inches Approximate Overall Length, 4 inches Approximate Blade Length, 4 1/2 inches Approximate Tang (Handle) Length (hidden tang style), 1 1/4 inches Approximate Widest Part of Blade, 3/8 inches Approximate Widest Part of Tang (Handle), Approximately 3mm Thick (1/8 inch)
Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
High quality 420 stainless steel construction + brass finger guard. 420 is a general purpose stainless steel containing medium quantity of carbon. It has good strength and reasonable impact resistant properties in both hardened and tempered conditions as compared to 440 grades. It has good corrosion resistance qualities in mild atmosphere, domestic and industrial environments. Its grinding is easy and it produces a fine, vivid and smooth, polished surface.
420 steel, due to its excellent harden-ability, is capable of getting hardened up to 56 HRC Rockwell or higher depending upon carbon contents / composition.
Description
These two blanks are made from 420 steel + brass finger guard. 420 is a general purpose stainless steel containing medium quantity of carbon.It has good strength and reasonable impact resistant properties in both hardened and tempered conditions as compared to 440 grades.
It has good corrosion resistance qualities in mild atmosphere, domestic and industrial environments. It is resistant to ammonia, blood, carbonic acid, crude oil, detergent solutions, dilute nitric acid, fresh water, food acids, many petroleum products, steam and vinegar, etc.
It is also called "surgical steel" because it is being used in production of surgical instruments on large scale around the world due to its good corrosion resistance and its easy machining qualities. It is also used in cutting tools like: Knives, Daggers, Swords, Haircutting Scissors and Domestic Scissors. Its grinding is easy and it produces a fine, vivid and smooth, polished surface.
420 steel, due to its excellent harden-ability, is capable of getting hardened up to 56 HRC Rockwell or higher depending upon carbon contents / composition.
5. Whole Earth Supply Large Partial Tang Clip Point Hunting Damascus Skinning Blank Blanks Blade Knife Knives Making High Carbon Steel
Feature
Large Partial Tang Clip Point Hunting Damascus Skinning Blank Blanks Blade Knife Knives Making High Carbon SteelDimensions: 9.0 inches Approximate Overall Length, 5.0 inches Approximate Cutting Edge Length, 3.5 inches Approximate Handle Length (partial tang), 1.2 inches Widest Part of Blade, 0.5 inches Widest Part of Handle, Approximately 4mm Thick (1/8 inch)
High Quality, One-Piece Damascus Construction: 1095 High Carbon Steel and 15n20 Steel
Raindrop Damascus Pattern
Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
Description
This item is for hunting. This blade is handmade from 1095 High Carbon Steel and 15n20 Steel. It is hardened to about 57-60 on the Rockwell C scale (HRC). This blade is a serious blade that will work well for hunting and fishing. It can be easily sharpened at home or in the field, and will hold an edge very well. It is genuine layered damascus steel (not fake or imitation damascus). Pin hole sizes may vary and we are not able to determine the size of the holes of the exact product you will receive since it will be shipped by Amazon. Blank may require additional sharpening.6. Large Clip Point 1095 High Carbon Steel Knife Blank +Brass Finger Guard for Custom Making Knives Blade Blades Blanks Hunting
Feature
9 inches Approximate Overall Length, 5.125 inches Approximate Blade Length, 2.625 inches Approximate Handle Length (partial tang), 1.0 inch Widest Part of Blank, 0.5 inches Widest Part of Handle, 4mm (1/8 inch) Thick ApproximatelyQuality 1095 high carbon steel, one-piece construction.
Solid brass guard. Brass guard will require additional buffing and/or polishing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place.
Blood groove along both blade sides. 1095 is a high carbon steel (not a stainless steel) and is commonly used in heavy duty tools. It can carry an extremely sharp edge. 1095 makes great steel for heavy duty choppers and survival knives because of its extreme durability and resistance to chipping, easy sharpening and edge retention. It is much tougher than premium stainless steels.
Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
Description
This beautiful blade is handmade from high quality 1095 steel1095 is a high carbon steel (not a stainless steel) and is commonly used in heavy duty tools. It can carry an extremely sharp edge. 1095 makes great steel for heavy duty choppers and survival knives because of its extreme durability and resistance to chipping, easy sharpening and edge retention. It is much tougher than premium stainless steels. Because it is a high carbon steel, it is very important to keep it clean and oiled. Take extra care to store a knife made of 1095 out of its sheath (this is a good idea for all knives) and keep a thin layer of lubricant on the steel when not in use.
This knife blank is custom designed by us and 100% hand-forged.
The solid brass bolster (finger guard) will require polishing and/or buffing. Brass bolster is fitted to the tang. Brass pins are not required to attach the guard. Your handle will hold the brass guard in place.
Specifications:
Upswept Blade Style
9 inches Approximate Overall Length
5.125 inches Approximate Cutting Edge Length
2.625 inches Approximate Handle Length
1.0 inch Widest Part of Blank
0.5 inch Handle Width (partial/hidden tang style)
4mm (1/8 inch) Thick Approximately
Steel Construction: 1095 high carbon steel
Blade comes sharpened. A final edge may be applied for an even sharper razor edge.
This is a stock photo of the item. It is not the exact blank you will receive. Each item may vary and measurements may vary as each blank is custom hand-made.
As this blank is made with high carbon steel which is prone to rusting, small flecks of rust may appear on the blade. These can be rubbed out with out any metal polish. We do our best to keep the blanks completely rust-free, but due to the nature of this metal, this is not always 100% possible.
7. SZCO Supplies Clip Point Blade Hunting Knife, 8-Inch
Feature
8 inches overall length4.25 inch blade length
3.75 inch tang length
Description
This 8 Inch Clip Point Blade Blank by Szco Supplies is 8 inches in overall length with a blade length of 4.25 inches and a tang length of 3.75 inches. It is constructed of stainless steel. It is full tang and comes with a brass guard.8. SZCO Supplies Drop Point Blade Hunting Knife, 8.5-Inch
Feature
8.5 inches overall length4.5 inch blade length
4 inch tang length
Description
This 8.5 Inch Clip Blade Blank by Szco Supplies is 4.5 inches in overall length with a blade length of 4.5 inches and a tang length of 4 inches. It is constructed of stainless steel. It is full tang and comes with a brass guard.9. SZCO Supplies BL-DM2723 Full Tang Clip Point Blank Damascus Blade, 8.25"
Feature
8.25 Inches overall260+ Layers of Damascus steel
Pre drilled for handle rivets
Description
This Full Tang Damascus Steel Clip Point Blank Blade by Szco Supplies is 8.25 inches in overall length. This blade blank is comprised of over 260 layers of patter welded Damascus steel. Holes have been pre drilled for placement of custom handles.10. Premium S Series Make a Knife S12 Knife Blank Dakota Clip Point Bowie
Feature
9cr14MoV Stainless9 7/8" Overall
5 1/4" Cutting Edge
2 - 1/4" pin holes and 1 1/4" lanyard hole
3mm thick
Recent Comments