List of the Top 10 hinged air return grille you can buy in 2019
When you want to find hinged air return grille, you may need to consider between many choices. Finding the best hinged air return grille is not an easy task. In this post, we create a very short list about top 10 the best hinged air return grille for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 hinged air return grille:
Best hinged air return grille
1. 24" X 12 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 26.5"w X 14.5"h]
Feature
24"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.75" Width X 14.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
24" X 12 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White24"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.75" Width X 14.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
2. 20" X 14 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 22.5"w X 16.5"h]
Feature
20"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.75" Width X 16.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
20" X 14 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White20"w X 14"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.75" Width X 16.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
3. 14" X 20 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 16.5"w X 22.5"h]
Feature
14"w X 20"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 16.75" Width X 22.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
14" X 20 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White14"w X 20"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 16.75" Width X 22.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
4. Accord ABRFWH2020 Return Filter Grille with 1/2-Inch Fin Louvered, 20-Inch x 20-Inch(Duct Opening Measurements), White
Feature
Steel construction, 1/2-in spaced finsFor sidewall or ceiling application
Removable hinged face accepts nominal 1-in thick filters for easy installation and cleaning
The number of louvered columns and mounting holes will vary based on the size of the grille ordered
Listed product sizes refer to the duct opening measurements, not the register itself
Description
Accord Ventilation model ABRFWH2020 is a white, 20-Inch x 20-Inch (Duct Opening Measurements), return filter grille with a 1/2-inch spaced fins. To determine the correct size to order, measure the size of the duct opening (not the old vent itself). Each Accord Ventilation product is crafted using high quality materials that provide strength and durability. Accord Ventilation produces floor registers, grates, and vents in a variety of designs and sizes. Accord Ventilation products are sure to enhance any home decor. Our Lifetime Limited Warranty covers every floor register, vent, grate, and grille manufactured by Accord Ventilation.5. 20" X 10 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 22.5"w X 12.5"h]
Feature
20"w X 10"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.75" Width X 12.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
20" X 10 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White20"w X 10"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 22.75" Width X 12.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
6. 18" X 12 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 20.5"w X 14.5"h]
Feature
18"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 20.75" Width X 14.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
18" X 12 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White18"w X 12"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 20.75" Width X 14.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
7. 30" X 16 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 32.5"w X 18.5"h]
Feature
30"w X 16"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 32.75" Width X 18.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
30" X 16 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White30"w X 16"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 32.75" Width X 18.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
8. 25" X 20 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 27.5"w X 22.5"h]
Feature
25"w X 20"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 27.75" Width X 22.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
25" X 20 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White25"w X 20"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 27.75" Width X 22.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
9. 24" X 18 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 26.5"w X 20.5"h]
Feature
24"w X 18"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.75" Width X 20.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
24" X 18 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White24"w X 18"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.75" Width X 20.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
10. 24" X 8 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White [Outer Dimensions: 26.5"w X 10.5"h]
Feature
24"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.75" Width X 10.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLEOur Easy To Use Filter Grille Latch is Powder-Coated BEFORE Installation - And Requires No Screwdriver To Open.
High Quality Solid Stamped steel with Counter-Sunk Screw Holes (Screws Included) and No Sharp Edges
Carefully shrink wrapped with cardboard backing to prevent damage in shipment
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful. Looks Like It Was Just Waxed
Description
24" X 8 Steel Return Air Filter Grille for 1" Filter - Fixed Hinged - ceiling Recommended - HVAC DUCT COVER - Flat Stamped Face - White24"w X 8"h Is The Size For The Duct Opening Measurement Only, Actual Front End Outer Dimensions Are 26.75" Width X 10.75" Height - SEE BELOW IN DESCRIPTION HOW TO MEASURE A GRILLE
You may think of grilles and registers as a generic component of the ventilation system in your house. But they are also the most visible representation of you air system.
These grilles and registers give you an extra measure of quality that are visible to your family members and house guests.
High Standard
Every part is hand inspected for quality before it is packaged, no exceptions.
No Sharp Surface Edges. Just run your finger along the edge of the top plate and you will find a smooth finished surface.
Powder-Coat Finish - Smooth, Shiny, Scratch-Resistant, Beautiful.
Quality Packaging - Carefully Shrink Wrapped With Cardboard Backing To Prevent Damage In Shipment
Easy Unrestricted Air Flow For Your HVAC System
This model has " fin design
This model can have the face/door removed.
This model uses a 1" thick filter.
How To Measure A Grille
Overall Size:
Measure the size of the air duct/drywall opening. Do not measure the overall size of the register itself, only measure the "hole" in the wall/duct. Every grille has a front end frame, that will overlap at wall joint.
Total outer size of this grille is; listed size +2.5".
Width vs Height
The first number in a grille size, represents the width, the second number represents the height. Example: If your hole is 20" wide by 14" tall, order a 20x14. If your hole is 14" wide by 20" tall, order a 14x20.
Recent Comments