List of the Top 10 motion zwave you can buy in 2019
When you want to find motion zwave, you may need to consider between many choices. Finding the best motion zwave is not an easy task. In this post, we create a very short list about top 10 the best motion zwave for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 motion zwave:
Best motion zwave
1. GE Z-Wave Plus Smart Lighting Control Motion Sensor Dimmer Switch, In-Wall, Vacancy / Occupancy Sensor, White & Light Almond Buttons, Zwave Hub Required- Works with SmartThings Wink & Alexa, 26933
Feature
ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately)
Wirelessly trigger scenes and send alerts when motion detection has turned lights on or off. Remotely monitor with any mobile device (Requires Z-Wave gateway or controller)
Multiple Operation Modes: Occupancy - auto ON/auto OFF, Vacancy - manual ON/auto OFF, Manual - manual ON/OFF. 3 Sensitivity Levels - low, medium, high
Requires in-wall installation with hard-wired connections - Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included)
Description
Set your life in motion with the Z-Wave Plus In-Wall Smart Motion Switch. This energy-efficient sensor works with your homes gateway to wirelessly trigger scenes and send alerts to your smartphone or tablet whenever motion is has turned lights on or off.* Three different modes offer the best lighting option for you: occupancy, vacancy and manual. In occupancy mode, the lights will automatically turn on when you enter the room and automatically turn off once youve left (customizable between 5 seconds and 30 minutes). In vacancy mode, the lights are turned on manually and will turn off automatically after a preset amount of time. In manual mode, the lights will function as a normal light switch and manually turn on and off. Along with conveniently saving you time and energy costs, the smart motion dimmer can replace any existing light switch in your home, and can be used in 3- and 4-way applications. You may also coordinate the switch with your household decor with the included white and light almond buttons. Experience the comfort of automation in your life when you come home to the Z-Wave Plus In Wall Smart Motion Switch. *Functions may vary depending on gateway or controller.2. Z-wave Plus Motion Detector, Easy to install with PET Immunity, White (PIRZWAVE2.5-ECO)
Feature
Premium components provides accurate and instant motion detection in both Automation mode and security modeOvercomes potential interference of pets as large as 55 lbs, saving nuisance false alarms.
Easy installs with included flush mount and corner mount wall brackets and begins to learn as Soon as batteries power it up.
Five Year battery Life and discrete design keep it out of sight and out of mind when not on alert.
Natively compatible with SmartThings, it works with most brands of Z-wave home security hubs like Vera Plus, Vera Edge, Vera Lite, HomeSeer, D-link staples connect and Piper NV. If your brand is not listed, (e.g. Wink or Alarm.com based security panels) compatibility cannot be guaranteed.
Description
From the leaders in Z-wave plus technology, the Ecolink Motion Detector allows you to improve the safety and security of your home and family easily and effectively. Built with premium components for better performance, these motion sensors provide instant and reliable performance as part of your security system. Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices. Dimensions: 3.5L x 2.3W x 1.8H.3. Dome Home Automation Motion Detector Z-Wave - Light Sensor - Magnetic Mount, White (DMMS1)
Feature
PERFECT FOR HOME SECURITY SYSTEMS - Z-Wave Plus Certified and compatible with Z-Wave Hubs, to seamlessly integrate with Wink, SmartThings, Home Seer, Nexia, and other hubsSENSES MOTION AND AMBIENT LIGHT - Senses current lighting conditions and helps create smart lighting scenes that optimize your personal safety and home security
110-DEGREE MOTION DETECTION FOR ALARM - Detects movement with extra-wide 110-degree coverage and responds by sending an alert to your smart home alarm system
BATTERY-POWERED TO INSTALL ALMOST ANYWHERE - Magnetic mount and battery operation (3-year battery life) for flexible installation in nearly any area of your home
ADJUSTABLE SENSITIVITY - Don't send your neighbors into a panic every time Rover and Spot enter a room
Description
Dome Z-Wave Motion Detector Dome now officially Works with Wink! Your home security system just got bumped up a notch. If anyone is moving along where they shouldn't be, you'll know about it. Lights will go on and sirens will blare--should you choose, or maybe just a notification to your smartphone will be enough, but you get the picture. With the Dome Home Automation Motion Detector you can program your Z-Wave hub to light the way when you enter a room, automatically turn on only the lights you want to, and turn them off when you leave. Built-in ambient light sensors dim lights to their perfect brightness Set it up to monitor your windows and doors, illuminate a hallway, or measure light levels so you're not wasting resources. It's like a camera, laser, and assistant in one, but cheaper and less intrusive. Use with most any Z-Wave Hub including: Wink, Home Seer, SmartThings, Vera, Harmony and more. Three-Year Battery Life and up to 150 foot range. Ambient light detection and advance configuration settings may not be available through all smart Hubs. Visit Dome's How-to page for more information4. Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)
Feature
4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately.NEW IMPROVED VERSION: The included CR123A battery makes the sensor lasts much longer than the previous version. Updated motion detection allows you to get even quicker activity reports.
CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different LED indicator modes (your hub needs to support advanced parameter input).
SECURITY FIRST: This sensor is equipped with bank-grade AES signal encryption. It's Z-Wave Plus certified to ensure it complies with the highest industry standards.
WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Almond (Securify), HomeSeer, Home Assistant, Hubitat, SmartThings Hub with custom device handler (contact seller for instructions), VeraEdge, VeraLite (running under UI7), and VeraPlus.
Description
- NOTE: This sensor is supported by open Z-Wave systems ONLY. It will not work with Wink or Z-Wave alarm panels.
- Model Number: ZSE40 VER. 2.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 1 CR123A battery (included)
- Z-Wave Range: Up to 100 feet line of sight
- Operating Temperature: 5-104 F
- Installation and Use: Indoor only
- Dimensions: 2.25" x 2.25" x 1"
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
Please contact seller if you're not sure your hub is compatible.
- SPECIFICATIONS:
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to get readings from this sensor from Alexa.
Alexa-compatible Z-Wave hubs include:
5. BeSense ZWave Ceiling PIR Motion Detector - Works Natively with Samsung SmartThings Hub
Feature
360 Degree Occupancy Sensor - Motion detector Optimized for SmartThings HUBHEIGHT REQUIRED: The recommended height to get a good detection range is 8 feet. If the space does not allow for that height, the best option for your project is the BeSense Wall Sensor.
Zwave Plus , Anti-tamper alarm, Real- time Battery power level monitoring, Lower consumption (2 years battery working life)
Pet forgiveness allows for three different modes controlled by internal jumper.
Easy set up, 2) AA batteries included. The batteries can be replaced
Description
An attractive, economical and easy to install sensor that senses in all directions (360 degrees), Zwave Plus andSuperior ability to detect & prevent false positives. Low battery consumption. Benefits: 360 degrees coverage Anti-tamper alarm Real- time Battery power level monitoring. Maximize your energy-savingswhen you automate the ON/OFF switching of your lights. They will let you know if someone is walking around where they shouldn't be, or they can automagically turn lights on when you enter the room6. Centralite Micro Motion Sensor (Works with SmartThings, Wink, Vera, and ZigBee platforms)
Feature
Works with SmartThings, Wink, Vera, and ZigBee platforms15-foot detection range
2-year battery life
Built-in temperature sensor
Trigger scenes, notifications, and automation features when used with a ZigBee-compatible hub
Description
The 3-series micro motion sensor adds both security and advanced home automation features to your connected home. You can be notified when theres movement in a certain area and even trigger lighting scenes, HVAC settings, and security alarms based on the detection of motion.7. GE Z-Wave Plus Wireless Smart Sensor, Motion Only, Portable, White, for Scene Activation and Remote Monitoring, 34193
Feature
Requires a Z-Wave certified gateway - Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, Nexia, Trane and Iris.Wirelessly activate scenes or lights and send alerts to your smartphone or tablet whenever motion is detected.
Sensor sits perfectly on a shelf, table counter or desk, and can be mounted to a wall or ceiling using the included mounting hardware - can be placed up to 150 feet from the Z-Wave hub or closest Z-Wave device
Covers an 180 degree range and can detect motion from up to 45 feet away - three (3) adjustable motion sensitivity levels for small or large rooms/areas ( low / medium / high )
Two Power Options - Powered wirelessly by two (2) CR123A batteries (included) for a battery life of up to 2 years or can be powered via micro USB cable and power adapter (cable and adapter sold separately) recommended for high-traffic areas like entry-ways, common rooms, and hallways
Description
Make the move toward convenience with the GE Battery-Operated USB Power Tabletop Motion Sensor with Wall Mount for your home. It sits perfectly on a shelf, table, counter or desk, and can also be mounted to wall or ceiling. Once you decide on the best sensor placement for your home, you may choose to power the sensor using the included batteries for a cordless installation or use a separate micro USB cable and AC power adapter. Never worry about changing batteries again.8. NEO Zwave PIR Motion Sensor,Easy Install, Battery Operated, Z Wave Detector Works with SmartThings,Vera, Zipato, Iris and Fibaro
Feature
Motion & Light Detection:A compact 2-in-1 multi-sensor that detects motion and light for your safety and convenienceAdjustable Sensitivity:Features a wide range of motion sensitivity that can be tailored to your household - an important feature for anyone with pets.
Wireless Notifications:Receive instant alerts via smart phone or laptop if motion is detected inside your home unexpectedly.
APPLICABLE TO MULTIPLE HOSTS:the Sensor is compatible with following brand alarm host:Fibaro/Vera/Zipato.It can't work alone and need work with their alarm host.In the Z-wave network communitcaions,PIR can be connected to any z-wave main controller.Please Note:the pir motion sensor will show as door sensor if you use Wink hub,and it works with smartthings,but need a device handler
SENSES MOTION AND AMBIENT LIGHT - Senses current lighting conditions and helps create smart lighting scenes that optimize your personal safety and home security
Description
What It DoesMotion & Light Detection
A compact 2-in-1 multi-sensor that detects motion and light for your safety and convenience.
Adjustable Sensitivity
Features a wide range of motion sensitivity that can be tailored to your household - an important feature for anyone with pets.
Wireless Notifications
Receive instant alerts via smart phone or laptop if motion is detected inside your home unexpectedly.
Advanced Connections
Connect with other Z-Wave devices for personalized, enhanced security: if motion is detected while you're away, trigger the alarm siren.
Custom Configurations
A large choice of custom parameters lets you control every last detail to best suit your needs.
Z-Wave Plus
Equipped with a new and improved 500 series chip for faster, safer, and better wireless connectivity.
Specification
Motion detection
Measure the light sensitivity
Compatible with 300 series and 500 series
Range:up to 50m outdoor up to 30m indoor
Power supply:CR123A x 1
Standby current : 16 uA
Battery life:1 years
Detection range:7 meters
Viewing angle: 110 degree
Operation temper:0-40 degree
Size (D* W * H):45mm* 45mm*48mm
US version: 908.4MHz
Please Note:the pir motion sensor will show as door sensor if you use Wink hub,and it works with smartthings,but need a device handler,please contact us if you can't pair.
9. Samsung SmartThings Motion Sensor
Feature
The Samsung SmartThings motion sensor can monitor movement in your home and send you alerts if there's unexpected activity when you're awayIt can trigger lights and other connected Devices to turn on when there is movement, and monitor temperature.Samsung SmartThings Motion Sensor
Connects to the Samsung SmartThings Hub to automate and monitor your home from the SmartThings smart phone app or Amazon Alexa.
Detects motion up to 15 feet with 120 degree view range;Monitor motion and temperature
Nearly 1/2 the size of the current smartsense motion, for a more minimal presence in the smart home
Monitor temperature in an area of your home and trigger the thermostat to adjust automatically
Description
Samsung SmartThings Motion Sensor10. BeSense Z-Wave Plus, PIR Motion Detector, Optimized for SmartThings, Pet Immune, Easy Setup
Feature
New SmartThings Handlers.Zwave Plus, Anti-tamper Alert, Real- time Battery power level monitoring, Lower consumption (2 years battery working life)
Pet forgiveness allows for three different modes controlled by internal jumper.
The batteries can be replaced, 2 AA batteries included.
Easy Setup, Zwave alliance.
Recent Comments