Looking for a rc gyro stabilizer airplane? Have a look at this 2019 guide!
When you want to find rc gyro stabilizer airplane, you may need to consider between many choices. Finding the best rc gyro stabilizer airplane is not an easy task. In this post, we create a very short list about top 10 the best rc gyro stabilizer airplane for you. You can check detail product features, product specifications and also our voting for each product. Let’s start with following top 10 rc gyro stabilizer airplane:
Best rc gyro stabilizer airplane
1. HOBBYEAGLE A3 Super 3 6-Axis Gyro & Flight Controller Stabilizer Half Set Program Card for RC AirplaneDrone UAV
Feature
32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance.6 flight modes, including Gyro-Off mode, Normal mode, Trainer mode, Atti-Lock mode, Auto-Level mode and Auto-Hover mode.
Compatible with most standard receivers, standard PPM single-line receivers and Futaba's S.Bus and S.Bus 2 receivers.
External LED module, integrated with data interface, flat or upright various mounting orientations supported.
Customizable hardware and software low pass filters for gyroscope and accelerometer, enable you to optimize the performance of the gyro as you wish.
Description
SpecificationsMain Controller: 32-bit MCU
Sensor: High-precision 3-axis gyroscope and 3-axis accelerometer
Gyroscope Scale Range: 2000 dps
Accelerometer Scale Range: 4g
PWM Output: 920uS ~ 2120uS with 1520uS center length / 50 ~ 333Hz
Input Voltage: 4.8V ~ 8.4V
Operating Temperature: -10 ~ 50
Size: 432714mm
Weight: 10g (excluding wires)
External LED Module
An external LED module is added to make the gyro even easier and more convenient to install and use.
Trainer Mode
Trainer Mode is added. When flying in this mode, you can only tilt the plane to a certain angle by giving aileron or elevator stick input. Roll and loop are not allowed in this mode, the plane will be stabilized all the time. This prevents the plane from being tilted into a larger angle that may cause a danger. This mode can be used as emergency rescue, or in other applications, e.g. to have a training for new beginners or to use for FPV
6-position Mode Switching
This new feature allows you to switch the flight mode among all modes supported during flight, by using a mixing of a 2-position and 3-position toggle switch on your transmitter
Programming Examples for 6-position Switch Mixing
Pass-through Channels
Pass-through function is available for [A2] and [E2] channels. When the second aileron or elevator channel is unused, the input signal applied to [A2] or [E2] will directly be passed to the output [OUT4] or [OUT5]. With this feature, the [A2] and [E2] can be used as any other purpose as you need, e.g. throttle, gear or flap, etc
2. HOBBYEAGLE A3 Aeroplane Flight Controller Stabilizer System 6-axle Gyro for RC Drone Airplane Fixed-Wing Copter
Feature
Standard Wing Type, Delta-Wing and v-Tail.Separated Gain Adjustment for Each Flight Mode.
Please Confirm The 13-Bit Unique Product Series Number (s/n) On The Bar Code Label When Purchasing. This Number Can Be Verified At Our Website and It Is Also Required In The After-Sale Service, Please Keep It Securely!
Before Power On, Put The Aileron, Elevator and Rudder Sticks In The Middle Position. The Controller Needs To Perform Self-Calibration and Stick Centering After You Plugging The Battery
The Led Will Keep Blinking Blue Rapidly For About 3 Seconds While Calibrating, Just Don't Move The Plane And The Sticks Until The Initialization Is Done.
Description
Video Tutorial:http://www.hobbyeagle.com/2014/a3super2.php
http://v.youku.com/v_show/id_xnzq2mtczndmy.html
http://v.youku.com/v_show/id_xnzq2mtc3mjyw.html
http://v.youku.com/v_show/id_xnzq3mdy4odc2.html
http://v.youku.com/v_show/id_xnzq3mdu5odk2.html
Features:
One-Click Hover, Self-Hover.
Standard Wing Type, Delta-Wing and v-Tail.
Remote Master Gain.
Servo Frequencies: 50hz/125hz/250hz;
Separated Gain Adjustment for Each Flight Mode.
Automatic Stick Centering.
Hv (7.4) Operating Voltage Supported.
Futaba S.Bus/s.Bus 2 Supported.
Easy To Use, Extremely Well-Suited To Beginners.
Caution Notes
Please Confirm The 13-Bit Unique Product Series Number (s/n) On The Bar Code Label When Purchasing. This Number Can Be Verified At Our Website and It Is Also Required In The After-Sale Service, Please Keep It Securely!
Before Power On, Put The Aileron, Elevator and Rudder Sticks In The Middle Position. The Controller Needs To Perform Self-Calibration and Stick Centering After You Plugging The Battery, The Led Will Keep Blinking Blue Rapidly For About 3 Seconds While Calibrating, Just Don't Move The Plane And The Sticks Until The Initialization Is Done.
It's Extremely Important To Verify That The Gyro Reacts In The Correct Direction Before Flight, or It Could Lead To Losing Control or Even Crash During Flight!
You Need To Restart The Controller After Changing The Receiver Type To Make New Setting Take Effect.
Never Use The Delta-Wing or v-Tail Mixing Functions of Your Transmitter. The New A3 Series Supports a Wide Working Voltage From 5 To 7.4v, You Can Use HV Receiver or Servo Directly.
The Radio Control Models Are Not Toys. The Propellers Rotate At High Speed and Pose Potential Risk, Please Carry Out Debugging and Flying In Open Space Far Away From The Crowd. The Beginner Should Be Directed By Someone Experienced.
3. HobbyEagle A3 Pro 6-Axis Flight Control Gyroscope Balancing Apparatus Airplane Gyro Stabilizer for Fixed Wing
Feature
The new A3 Pro is a high-performance and functional 6-axis gyro and stabilizer designed for R/C airplanes. This gyro can be used with nearly any size and type of R/C airplanes and it will make the flying even easier and comfortable32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance
6 flight modes, including Gyro-Off mode, Normal mode, Trainer mode, Atti-Lock mode, Auto-Level mode and Auto-Hover mod
3 wing types: standard fixed-wing, delta-wing(flying-wing), v-tail
Compatible with most standard receivers, standard PPM single-line receivers and Futaba's S.Bus and S.Bus 2 receivers
Description
Download files:http://www.hobbyeagle.com/manuals
/A3Pro_User_Manual_v1.0_en.pdf
//www.hobbyeagle.com/manuals/A3Pro_Menu_Overview_en.pdf
Separated basic gain adjustment for aileron, elevator and rudder.
Remote master gain supported.
Sub Trim and Travel Limit settings supported.
Specifications
Main Controller: 32-bit MCU
Sensor: High-precision 6-axis gyroscope and 6-axis accelerometer
Gyroscope Scale Range: 2000 dps
Accelerometer Scale Range: 4g
PWM Output: 920uS ~ 2120uS with 1520uS center length / 50 ~ 333Hz
Input Voltage: 4.8V ~ 8.4V
Operating Temperature: -10 ~ 50
Size: 432714mm
Weight: 10g (excluding wires)
Connection
A3 Pro has 5 separate input channels which used to connect to the receiver and 3 output channels for servos, and supports standard receivers, PPM and Futaba's S.BUS(or S.BUS 2) single-line receivers. [AIL], [ELE] and [RUD] should be connected to aileron, elevator and rudder channels of the receiver. [MOD] is used to change the flight mode using a 3-position switch of the transmitter. Usually you can connect it to the gear or any of aux channels of the receiver. Of course, you have the option to not connect this channel, if so, the gyro will always work in the mode which is set for position-1 in the Setup Menu. [PPM/Bus/G] is used for remote master gain, it allows you to adjust the master gain of the gyro by using a proportional knob or slider of the transmitter. However connecting this channel is not a must if you don't want to change the gain in the flight. [PPM/Bus/G] is also used as the input channel when a futaba's s.bus or PPM single-line receiver connection is being used.
4. Soulload 3-axis Flight Control Controller Stabilizer System Gyro for FPV RC Airplane, Fixed Wing Aircraft
Feature
Specially designed for RC airplane, 3 axis gyro improves fly stability.Support common fixed wing aircraft; delta wing; V tail RC modelsGliders.
Remote control can shut down 3AXIS gyro system, convenient for skillful players to operate planes manually Improve stability & flexibility
Assemble your planes completely before assemble the 3 axis gyro. Shut down V tail & delta wing multi control function of radio, make the radio work for common planes.
Package included: 1 x 3-axis flight controller +4 x Servo cable.
Description
Features:Specially designed for RC airplane, 3 axis gyro improves fly stability.
Support common fixed wing aircraft; delta wing; V tail RC models.
Remote control can shut down 3AXIS gyro system, convenient for skillful players to operate planes manually.
Improve stability & flexibility.
Assemble your planes completely before assemble the 3 axis gyro.
Shut down V tail & delta wing multi control function of radio, make the radio work for common planes.
Specification:
1. Item Name: 3 axis flight controller
2. Working power: DC 4V -6V
3. Working current: 18mA
4. Transmitter compatible: PPM, PCM, 2.4G
5. Working temperature: -20*~ 65*
6. Dimension: 38 28mm
7. Net Weight: 60g
Indicator light:
a. Red indicator blink: initial status.
b.Red indicator on: 3Axis radio in turn on status.
c.Red indicator off: 3Axis radio in turn off status.
e.Green indicator off: normal airplanes model.
f.Green indicator on: V-tail multiple control model.
g. Green indicator blink: Wing (Triangular empennage) multiple control model.
Package included :
1 x 3-axis flight controller
4 x Servo cable
5. HOBBYEAGLE A3 Super 3 6-Axle Gyro & RC Flight Controller Stabilizer Full Set - Programe Card for RC Airplane
Feature
32-bit MCU, high-precision 6-axis MEMS sensor, improved hardware platform and new firmware solution provide more reliable performance.6 flight modes, including Gyro-Off mode, Normal mode, Trainer mode, Atti-Lock mode, Auto-Level mode and Auto-Hover mode.
Compatible with most standard receivers, standard PPM single-line receivers and Futaba's S.Bus and S.Bus 2 receivers.
External LED module, integrated with data interface, flat or upright various mounting orientations supported.
Customizable hardware and software low pass filters for gyroscope and accelerometer, enable you to optimize the performance of the gyro as you wish.
Description
SpecificationsMain Controller: 32-bit MCU
Sensor: High-precision 3-axis gyroscope and 3-axis accelerometer
Gyroscope Scale Range: 2000 dps
Accelerometer Scale Range: 4g
PWM Output: 920uS ~ 2120uS with 1520uS center length / 50 ~ 333Hz
Input Voltage: 4.8V ~ 8.4V
Operating Temperature: -10 ~ 50
Size: 432714mm
Weight: 10g (excluding wires)
External LED Module
An external LED module is added to make the gyro even easier and more convenient to install and use.
Trainer Mode
Trainer Mode is added. When flying in this mode, you can only tilt the plane to a certain angle by giving aileron or elevator stick input. Roll and loop are not allowed in this mode, the plane will be stabilized all the time. This prevents the plane from being tilted into a larger angle that may cause a danger. This mode can be used as emergency rescue, or in other applications, e.g. to have a training for new beginners or to use for FPV
6-position Mode Switching
This new feature allows you to switch the flight mode among all modes supported during flight, by using a mixing of a 2-position and 3-position toggle switch on your transmitter
Programming Examples for 6-position Switch Mixing
Pass-through Channels
Pass-through function is available for [A2] and [E2] channels. When the second aileron or elevator channel is unused, the input signal applied to [A2] or [E2] will directly be passed to the output [OUT4] or [OUT5]. With this feature, the [A2] and [E2] can be used as any other purpose as you need, e.g. throttle, gear or flap, etc
6. HobbyEagle A3-L Aeroplane RC Flight Controller Stabilizer System 3-axle Stabilizer Gyro for RC Airplane Fixed-wing Copter
Feature
Video Tutorial: http://v.youku.com/v_show/id_XNzQ2MTgzNjU2.htmlFutaba S.Bus / S.Bus 2 Supported.
Adaptive Intelligent Attitude Algorithm is Used To Get The Best Performance.
Easy To Use, Extremely Well-Suited To Beginners.
HV (7.4) Operating Voltage Supported.
Description
Features:Quad+.Quadx.Hex6+.Hex6X.Y6.Y6REV.
HV (7.4) Operating Voltage Supported.
Futaba S.Bus / S.Bus 2 Supported.
Adaptive Intelligent Attitude Algorithm is Used To Get The Best Performance.
Easy To Use, Extremely Well-Suited To Beginners.
Specifications:
Input Voltage: 5 To 7.4v
Gyroscope: 2000dps
Accelerometer: 4g
Operating Temp: -40 ~ 85
Size: 43 27mm
Weight: 11g
Caution Notes:
1. Please Confirm The 13-Bit Unique Product Series Number (s/n) On The Bar Code Label When Purchasing. This Number Can Be Verified at Our Website And It is Also Required In The After-Sale Service, Please Keep It Securely!
2. Before Power On, Move The Throttle Stick To The Bottom. The Controller Needs To Perform Self-Calibration and Throttle Position Calibration After You Plugging The Battery, The Led Will Keep Blinking Blue Rapidly for About 3 Seconds While Calibrating, Just Don't Move The Plane and The Throttle Stick Until The Initialization is Done. The Led Will Keep Blinking Red Rapidly for Alert If The Throttle Isn't At The Lowest Position When Power On!
3. Please Ensure That All The ESCS Have Been Connected To The Controller In Their Correct Order and All of The Propellers Rotate In Their Correct Directions, Please Refer To The Illustrations On The Last Page of This Manual, Otherwise It Could Lead To Losing Control or Even Crash During Flight!
4. You Need To Restart The Controller After Changing The Receiver Type To Make New Setting Take Effect.
5. The New x6 Series Supports a Wide Working Voltage From 5 To 7.4v, You Can Use a HV Receiver Directly.
6. The Radio Control Models are Not Toys. The Propellers Rotate At High Speed and Pose Potential Risk, Please Carry Out Debugging And Flying In Open Space Far Away From The Crowd. The Beginner Should Be Directed By Someone Experienced.
7. QWinOut High Precision JCX-M6 M6 Flight Controller Digital Gyro for RC Fixed-Wing Airplane V-Tail Model Plane FPV
Feature
1.Stable flight: 2.Stunt flight assistance:3.Independent gyro gain adjustment potentiometer and the algorithm of software gyro gain make the gyro into its best automatically.
4.4-digit DIP switcher makes the functional settings for board become easy and convenient
5.Controlling switcher of flight manual is used through the channel of on-and-o on the remote control to controlthe start function.
6.Red and blue LED lights make it easier to tell the work mode and the opposite.
Description
Its small size of 30x42mm, the weight of 6g, and perfect configuration make it easily to be installed and used in any size of planes.lt is supportive to various types of fixed-wing, flying-wing,and V-tail
Specifications:
- Dimension: 30 x 42 mm
- Weight: 6 g
- Voltage: 4-9 V DC
- Current:40 MA(max)
- Sample Rate of Gyro: 2 KHz
- PWM Input: 50Hz PMW
- PMW Output:50Hz PMW
- Operating temperature: -25 to 80
8. SkyRC GC301 Automatic Stability Control Gyro For RC Car, Drift Assist
Feature
Gyroscopically controlled stability control for your RC car. It senses drift and helps maintain car on course.Completely automatically steers your car for you but does not hamper your normal steering inputs
Gain (strength) is adjustable and there is a port for remotely adjusting gain while driving
Precisely maintains vehicle direction regardless of track conditions or outside forces
Adds incredible stability which makes your car easier to drive faster
Description
GC301-Gyro for RC Cars, It is a device using gyro sensor and software algorithm to adjust steering output, providing you with a more stable and controlled driving experience. The Gyro's heading hold effect manages steering output by automatically keeping the car's tires aligned in the direction you choose. It will also precisely maintain car direction regardless of the amount of traction of the track or outside force apply to the car. With heading hold, the car is more maneuverable and controllable. Features Automatic corrective steering action for RC cars GC301 gyro allows you to drive the RC car toward a given direction and take precision turns at high speeds. This makes the vehicle more manageable, controllable and stable. Remote gain function You can adjust gain from the transmitter CH3 by using the remote gain function. Gain can also be adjusted with the trimmer on the GC301.9. HobbyKing TrackStar D-Spec Drift Gyro V2
Description
TrackStar D-Spec Drift Gyro V2is not only simpler to use than our V1 but it is also smaller and easier to fit in tight spaces. This is a fantastic gyro and works by simply plugging it in between your receiver and steering servo. One of the neat features of this gyro is that the gain can be adjusted on the fly by connecting it to the third channel of your receiver so you don't have to take it off the track and remove the body to make adjustments to the gain. You could even change the gain for different sections of your drift course, if some need more gain than others.This is also a great gyro for F1 cars, a trend that seems to be really taking off, and with its small size you won't have trouble finding space to mount it.This is a fantastic little unit and is one of the best gyros we have ever used.Features: Super compact size Wires can be remove All wire outlets are facing upware, fitting wires is much easier Remote gain function avaliable Perfect for those latest narrow graphite structure drift chassisSpecs:Gyro Sensor: Vibration Structure GyroOperating Voltage: 4~8.4VCurrent Drain: 25mAOperating Temperature Range: -10C ~ +45CSize: 21x21x11mmWeight: 3.6g10. Hitec RCD 61076 HG3XA Gyro for Airplanes
Feature
Voltage Range: 5 ~ 6V DCGyro Sample Rate: 1KHz
Dimensions inches: 1.85 x 1.30 x 0.55, Dimensions millimeters: 47.0 x 33.0 x 14.0, Weight ounces: 0.39, Weight grams: 11.0
Recent Comments