multimeter usb buyer’s guide for 2019
We spent many hours on research to finding multimeter usb, reading product features, product specifications for this guide. For those of you who wish to the best multimeter usb, you should not miss this article. multimeter usb coming in a variety of types but also different price range. The following is the top 9 multimeter usb by our suggestions:
Best multimeter usb
1. MakerHawk USB 3.0 Tester, USB Power Meter, 3.7-30V 0-4A Voltage Tester Multimeter, USB Current Meter Tester, IPS Color Display Voltmeter Ammeter, USB Charger Tester AT34
Feature
Guide Video: https://www.youtube.com/watch?v=Alta7jcpgBI . Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance; Measuring voltage: 3.7V-30V; measuring current: 0-4A.The AT34 uses a 0.96-inch IPS high-definition color LCD display to display the state of charge of the appliance, voltage, current, capacity, energy, power, equivalent impedance, temperature and other indicators at a glance. 160 degree wide viewing angle, high brightness and long working life. Fast charge recognition, widely compatible: AT24 supports QC2.0, QC3.0, i Phone 2.4A/2.1A/1A/0.5A, Andriod DCP, fast charge protocol identification, let you know the state of charge of the phone.
Power-off storage, data is guaranteed: AT34 has power-off storage function, which can store capacity and energy data when the mobile power is cut off, which is convenient for subsequent viewing and convenient for capacity energy measurement of mobile power.Note: Other USB testers that do not have a power-down storage function cannot test capacity and energy.
4-bit accuracy for more accurate measurements; Measure the load equivalent impedance and power; Thermometer function, Celsius and Fahrenheit free switching: Using high-precision thermistor sensor; USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test.
Measure the quality of the charger: connect the same load, compare the no-load and the load, the greater the voltage drop, the worse the charger capacity is, the worse the quality; the voltage drop is not obvious or the voltage rises (leisure loss) Compensation function) The better the load capacity of this charger, the better the quality.
Description
Technical Parameters:Model: AT34
Measuring voltage: 3.7-30V
Measuring current: 0-4A
Capacity measurement range: 0-99999mAh
Energy measurement range: 0-99999mAh-999.99Wh
Load impedance measurement range: 1-9999.9
Temperature measurement range: 0C-80C / 32F-176F
Operating temperature range: 0C-45C / 32F-113F
Product size: 64mmx22mmx12mm
Display screen: 0.96 inch color LCD
Voltage measurement resolution: 0.01V
Current measurement resolution: 0.001A
Voltage measurement accuracy: (0.8% + 4 words) 25 C
Current measurement accuracy: (1% + 4 words) 25 C
Power measurement range: 0-120W
Temperature measurement error: 3C / 6F
Refresh rate: 2Hz
Applications:
Testers are widely used in the quality inspection of 3C digital peripheral products, and are the first choice for digital gamers and electronic enthusiasts.
Real-time detection of the state of charge of the appliance, voltage, current, power and other indicators at a glance;
Fast charge recognition, widely compatible: AT24 supports QC2.0, QC3.0, i Phone 2.4A/2.1A/1A/0.5A, Andriod DCP, fast charge protocol identification, let you know the state of charge of the phone .
Power-off storage, data is guaranteed: AT34 has power-off storage function, which can store capacity and energy data when the mobile power is cut off, which is convenient for subsequent viewing and convenient for capacity energy measurement of mobile power.
USB 3.0 interface: Compatible with USB 2.0, support high current test, support USB3.0 interface mobile hard disk and U disk test.
Package Including
1 * AT34 USB Tester
2. AstroAI Digital Multimeter, TRMS 6000 Counts Volt Meter Manual and Auto Ranging; Measures Voltage Tester, Current, Resistance, Continuity, Frequency; Tests Diodes, Transistors, Temperature, Red
Feature
WIDE RANGE of tests for Voltage, Current, Resistance, Continuity, Capacitance, Frequency; Tests Diodes Transistors, TemperaturePROFESSIONAL LEVEL features include Auto-Ranging capability, and True RMS for measuring both AC Current and Voltage
EASE OF USE: Convenient features like Data Hold, Large LCD Backlit Screen, Auto Shut-off and Hanging Magnet, and Kickstand make taking and recording measurements easier than ever before
IDEAL FOR COMMERCIAL settings where it can handle the demands of a long workday, from the durable exterior to the wide range of heavy-duty capabilities
Built-in F400mA/600V and F10A/600V explosion-proof ceramic fuse tubes; Double Protection, more secure and reliable; The fuses can protect the multimeter effectively; Overload protection on all ranges
3 Years Warranty provided by AstroAI
Description
The AstroAI True RMS Multimeter is designed to be safely and accurately used by professionals in a commercial setting or weekend DIYer's that need a little more power utility from their standard digital multimeter. It's easy and safe to operate with advanced features built for measuring seemingly everything. Run tests on diodes and transistors while being able to measure voltage, current, resistance, continuity, capacitance, and frequency, all on one device. This multimeter is designed to be used in commercial settings, but can also be brought home to use with automotive or household electrical problems.Specifications
Digital Display: 5 , 6000
Sampling Speed: 2 times per second
Range Selection: Auto or Manual
Polarity Indication
Overload Indication
Low Battery Indication
Power: 1 x 9V 6F22 Battery Included
Temperature Test: Yes
Transistor Test: Yes
Diode Test: Yes
Continuity Test: Yes
External Current Test: Yes
Capacitance: Yes
Frequency: Yes
Safety/Compliances: EN61010-1 CAT III 600V, CATII 1000V
DC Voltage: 600mV/6V/60V/600V (0.8%+3), 1000V (1%+5)
AC Voltage: 600mV (1.2%+8); 6V/60V/600V (1.2%+6); 750V (1.2%+8)
Temperature: -40C~1370C; -40F~2000F (1-5%+4 depending on temp)
DC Current: 600A/6000A/60mA/600mA (0.8%+5); 6A/10A (1.5%+3)
Transistor hFE: PNP & NPN (lb2A; Vce1V)
Resistance: 600/6K/60K/600K/6M (1.5%+3); 60M (1.5%+5)
Capacitance: 60nF/600nF/6F/60F/600F/60mF
Frequency: 0~60MHz (1%+5)
Package Includes
1 x AstroAI WH5000A True RMS Digital Multimeter
1 x Test Leads (Pair)
1 x K-Type Thermocouple
1 x Multi-Function Socket
1 x User Manual
3. USB Meter, DROK Digital Multimeter USB 2.0, Multifunctional Electrical Tester, Capacity Voltage, Current Power Meter Detector Reader with Dual USB Ports, LED Display, 7 Modes
Feature
*7-MODE USB MONITOR* With 7 different modes, DROK USB tester can be used to measure voltage, amperage, capacitance, power going to your phone/battery pack. One button operation, simple and handy.*DUAL COLOR LED* Our USB charger tester Red and Blue color dual LED display, which is bright and easy to monitor the charge voltage and current of your digital USB devices to ensure the optimal charge rate.
*DUAL USB OUTPUT* There are two USB output available which can be used simultaneously. Output I can be used for device charging and data transfer, while output II is only for charging your mobile phones, tablet PCS and etc. Output I Support QC 2.0 9V & 12V charging, but don't insert any device in Output II when using QC 2.0 Charging.
*MULTIFUNCTION* Our multiple USB Detector can be used for capacitance checking, capacitance clear, over voltage and under voltage alarm, over-current, and short circuit alarm, easily test the power/quality of the chargers and USB cables.
*100% RISK-FREE SATISFACTION GUARANTEE* We offer you 100% risk-free satisfaction guarantee to let you buy with confidence.
Description
Is your mobile device not charging properly, and you suspect the new charger that you bought recently?Do you want to check If your solar charger is giving proper current for your mobile device?
Specification:
Input voltage : 3.20 - 15.0V
Resolution: 0.01V (<10V); 0.1V (>/=10V)
Measuring current: 0.00 -3.00a (10a max, but cannot work in 10a for long time)
Resolution: 0.01A
Capacitance measurement: 0-99999 MA/H
Capacitance accumulation: Yes
Power testing: 0.00-9.99-99.9W
Over-voltage alarm: when voltage >/=5.6V, voltage digital point will Flash quickly
Lacking-voltage alarm
Over-current alarm : when current >/=3A, current digital point will Flash quickly
Short-circuit alarm: current digital point will Flash quickly dual USB output
Output I (dual function - device charging and data transfer)
The charging current, in this case, is determined by compatibility. you can view the voltage and current values at the same time.
Output II (device charging only)
The built-in intelligent charging control IC matches the most appropriate and safest current for your devices automatically. It is used mainly for non-original chargers, but it is suitable for original chargers as well. This universal USB gadget is suitable for most of the mobile phones, mobile power, tablet PCS and other USB devices, like BC1.2, yt/d1591-2009 and non-bc1.2 (including iPad, iPhone and Samsung Galaxy).
Get yours today by clicking add to cart above!
4. TekPower TP9605BT Auto Ranging Digital True RMS Smart Multimeter with Bluetooth & USB Connection, Free App Available for iOS and Android
Feature
Full Function 6000 Counts True RMS Multimeter with Intelligent Connections,USB and smart phone compatible (iOS and Android)World First Cellphone Connected Multimeter, download free Android app "Tekpower" from Google Play Store or download iOS app "Digital Multimeter" developed by Jun Lin from the App Store
Wired USB connection available
Comes with K-Type thermo probe, optical USB cable, PC software and smart phone apps CD, test leads, and user manual
Free APP software and USB Data logger software
Description
The world first Cellphone APP connected Digital Multimeter on the market! We are excited to announce this fantastic TP9605BT meter built with two ways of connection:1. Connected with Android cellphone
2. USB Connection with Windows PC
It seamlessly combines the meter with USB and APP to work with either your computer or cellphone. You can display the test results from the measurement and share it with anyone by Facebook , Twitters or email by just a tap of your finger. It is easy to use and saves the data in a .csv file. You can set sampling speed and send the test results out by email.
This meter has full features of an auto ranging meter, voltage on both AC and DC, 10A Current on both AC and DC. It measures frequency up to 10Mhz and duty cycle. The capacitance measures up to 100mF with high accuracy. It measures Ohms, Diodes and hold the Max and Mini results. The continuity function is useful to pinpoint a short circuit.
With back light to use in dark and data hold for easy reading, this meter is designed for long time measurement with an APP on your cellphone and keep the data for future applications.
Go to App Store and search for "Digital Multimeter" or go to Play Store, search for Tekpower, download the APP.
App Installation Instructions for iPhones (iOS)
- Visit App Store on your iPhone and search for "Digital Multimeter", download the App developed by by Jun Lin
- Go to your iPhone' settings and enable Bluetooth if it's disabled
- Open the downloaded App "Multimeter" on your iPhone, then tap "Connect" at the bottom left corner of the screen, select the detected multimeter to connect and confirm
- Tap "Multimeter" at the bottom center of the screen. Congratulation! Your multimeter is now synchronized with your iPhone, please call us for service 909 628 6088
5. Eversame USB Digital Power Meter Tester Multimeter Current and Voltage Monitor, DC 5.1A 30V Amp Voltage Power Meter, Test Speed of Chargers, Cables, Capacity of Power Banks-Black
Feature
MULTIFUNCTIONAL USB TESTER: USB Meter Tester is mainly used to detect USB charging current, voltage, discharge capacity, quantity of electric charge, power, timing and so on. Meanwhile multimeter USB detector can be applied to the Power Capacity Storage and Over/Low Voltage-current Protection. It allows you to find the charging problem of the USB cables, wall chargers, and car charges more easily.BUILT-IN MORE SAFETY: Each USB meter tester has been built-in circuit with containing CW3002D chip for accelerating Large Current Fast Charging. Plus the Interior Smart System is designed to detect safety. The multimeter tester also supports QC 2.0/3.0 high voltage test, with the function of cutting off automatically when it's fully charged, to protect your valuable devices effectively.
PREMIUM LCD DISPLAY: Crafted from high-grade LCD monitor with low power consumption feature, bright and clear enough to monitor the parameters on the screen. Comes with three various display modes for your choosing. Ideally be broadly applicable to test capacity and electric energy of power bank; test the maximum output current of the charger; and test charging speed and quality of data cable and charging cable.
WIDE TESTING RANGE & SIMPLE OPERATIONInput/Output Voltage: DC3-30V, Current Range: 0-5.1A. This portable USB tester is easy to carry and enables you to put it in your bag or your pocket whenever you go, along with the symmetrical and reversible connector for your simply operation.
PACKAGE: 1X Multimeter USB Tester. 100% SATISFACTION WARRANTY: We stand behind all of our products 100%.Every item includes one year hassle-free guarantee with considerate customer service. Eversame always bear in mind that your satisfaction is our priority. For any reason you are unsatisfied with our product at any time, just feel free contact support for exchange or refund. Our customer service team are here and ready to assist you with any questions.
Description
Eversame Power Meter Tester-Each Power Meter tester from Eversame will be strictly tested by our QC Department, to prove the importance we set on quality.
-Perfect for evaluating whether or not the computer, USB wall charger, USB car charger are outputting acceptable voltage and current range for the device you are connecting
-This Power Meter Tester can plugs directly into any USB socket or cable, which displays on the screen the voltage, current and capacity
-It provides you a rough estimate of the capacity of the device you are charging
Specification
Input Voltage: 3V-30V
Input Current: 0-5.1A
Accuracy: +/- 1%
Display: LED, show voltage and current simultaneously
Maximum Capacity Value: 99999 mAh
Tester three dimensional size: 60*24*14mm
Operation Introduction
(1). The short press is the interface switch, and long press is battery capacity and other data reset;
(2). In the main interface, five-press is the setting of automatic power outages and timing turn-off(Five-press in the main interface, the character in the lower right corner of the display stars flashing, choose three settings of 'AO.. / OFF / 1-24H' by clicking or double-clicking, and when the flashing stops, it means the system saves the current settings automatically);
(3). Six-press is Chinese/English interface conversion.
Warm Tips
-This power meter tester may not support fast charging for some type of smartphones and devices.
-If any tester you bought from Eversame can't display the correct parameters while testing your devices, please feel free to contact us firstly and we will provide quick respond and offer you good solution.
Package Included
1 x Current Voltage Test Meter
Easy-To-Reach Support
Every product includes one year hassle-free guarantee with excellent after-sale service
6. Velleman Multimeter with USB and LAN Cable Tester
Feature
DC VOLTAGE 200 m / 2 / 20 / 200 / 600 Vbasic accuracy: 0.5% of rdg 2 digits for 200 mV range / 0.8% of rdg 2 digits for 2 to 200 V
range / 1.0% of rdg 2 digits for 600 V range
overload protection: 220 VAC for 200 mV range, 600 VAC or 600 VDC for other ranges
AC VOLTAGE 200 / 600 V
basic accuracy: (1.2 % of reading + 10 digits)
frequency range: 45 to 450 Hz
overload protection: 600 VAC or 600 VDC for all ranges
DC CURRENT 2 m / 20 m / 200 m / 10 A
basic accuracy: 1.0% of rdg 2 digits for 2 to 20 mA range / 1.2% of rdg 2 digits for 200 mA
range / 2.0% of rdg 2 digits for 10 A range
overload protection: F200mA/600V (resettable) - FF10A/600V (quick acting)
measuring voltage drop: 200 mV
RESISTANCE 200 / 2 k / 20 k / 200 k / 2 M
basic accuracy:
0.8% of rdg 2 digits for 200 to 200 k range / 1.0% of rdg 2 digits for 2 M range
overload protection: maximum 15 seconds, 220 V rms on all ranges
maximum open circuit voltage: 2.5 V
cable test: RJ11 / RJ12 / RJ45 / USB
maximum display: 1999, LCD display size: 1.8" x 0.7"
power supply: 2 x AAA 1.5 V battery (incl.)
operating altitude: < 6500 ft (2000 m)
operating temperature: 32 F - 104 F, storage temperature: 14 F - 140 F
continuity buzzer, transistor test, diode test and low-battery indication
ranging mode: manual
Description
VELLEMAN DVM630 MULTIMETER with USB + LAN CABLE TESTER. DMM with automatic polarity indication and 3-digit LCD display. Measurements: DC current up to 10 A, AC and DC voltage up to 600 V, resistance up to 2 M, diode, transistor and continuity test with buzzer. USB and LAN cable test. Data-hold function and backlight. Accessories: user manual, test leads, holster, batteries, adapter for transistor measurements, cable test unit.7. V&A Auto/Manual Ranging Digital Multimeter with USB Interface, VA18B
Feature
In conformity with IEC1010 CAT II 1000V,USB Connection with PCAuto power off (can be disabled)
Data hold and relative measurement
Electronic protection system, See chart for Comparison of listed meters
Blue LED Back-lit LCD display
Description
The newly released V&A VA18B DMM is a digital auto-range digital multimeter with a USB interface, which can be conveniently connected to your computer to monitor the real time measurements.This meter is fully featured, you can use it to measure AC/DC voltage and current, resistance, capacitance, frequency, temperature as well as diode check & continuity test.
This meter has won many awards since its release in 2006, one of them is the iF product design award, which is one of the world's three leading design awards and can look back proudly on a 50-year history. Every year at the Hannover Exhibition Center some 2,000 products from around 37 nations are judged by renowned experts, with the best of them receiving an iF seal of outstanding design quality ? a worldwide brand with high recognition value, guaranteeing its owner a place on the cutting edge of contemporary design.
Specifications:
*DCV:0-600m 0.5% 6-60-6000.8%-1kV1.0%
*ACV:0--600mV 3.0% 6-60-600V0.8%-700V1.5%
*DCA:0-600u -6m 1.5% 60m-600m1.8% 6A -10A2.0%
*ACA: 0-600u -6m 1.8% 60m-600m2.0% 6A -10A3.0%
*Resistance:0-600 0.5% 6k-60k-600k-6M0.5% -60M1.5%
*Frequency: 0-100-1000-10K-100K-1M 0.1%
*Temperature: -55 - 0 C 5.0% 0 - 400 C 2.0% 400 - 1000C 2.0%
*Capacitance: 0-60nF 3.0% 600nF-6uF-60uF 3.0% 300uF 5.0%
*Diode test *Audible continuity:< 50 ohm
*Dimensions: 7" X 3 1/4" X 1 1/2"
*Weight: 12 Oz
Accessories: Test leads, K-Type thermo probe, 9V battery, software CD, RS232C-USB cable & User Manual
8. BK Precision 390A Auto-Ranging, Average-Sensing Digital Multimeter with USB Data Connection and Temperature Probe, 20 Amp, 750VAC, 1000VDC, 40 Megaohms, 40 Millifarads, 40 MHz, -50 to 1300 Degrees C
Feature
Digital multimeter measures current, voltage, resistance, capacitance, frequency, and temperatureAverage-sensing meter provides accurate readings when measuring linear loads where the current or voltage has an undistorted waveform
Includes K-type thermocouple probe for taking temperature measurements
Audible continuity sensor confirms a circuit conducts electricity, and diode test detects proper functioning of a circuit's diodes
Meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 1,000V
Description
The BK Precision 390A digital multimeter (also known as a multitester) is an average-sensing, auto-ranging meter for measuring current, voltage, resistance, capacitance, frequency, and temperature in electrical testing applications. The meter comes with a set of detachable test leads. A K-type thermocouple probe is included for taking temperature measurements. An audible continuity sensor confirms a circuit conducts electricity, and a diode test detects proper functioning of a circuits diodes. The LCD shows readings in digits and on a 41-segment bar graph. It displays the present measurement or the highest or lowest reading in a session, for tracking sudden changes in readings. The relative mode stores a reading in memory to use as a zero point for subsequent readings so that multiple readings can be compared. The peak maximum or minimum function records instantaneous peak values for current and voltage. The microamp function identifies current changes in flame detector applications. A hold function keeps a reading on the display, even after the meter has been disconnected. An alarm sounds when the test leads are connected to the wrong jack for the measurement being taken. A USB data port connects the meter to a computer (USB cable and software are included). The unit automatically turns off after 30 minutes of nonuse to conserve battery life, and a low-battery indicator signals when the meter's batteries need to be replaced. The meter's body is made of molded rubber, which helps protect it against damage from falls, impacts, and abrasion.
This average-sensing , or average-responding, meter provides accurate readings when measuring linear loads, such as standard induction motors and incandescent lights, where the current or voltage has an undistorted waveform. When turned on, the meter is in auto-ranging mode and automatically selects the correct operating range for the property being measured. It can be switched to manual-ranging mode, which allows the operator to choose the appropriate operating range. The LCD has a 4,000-count resolution, meaning it can display up to 3,999 units (3-3/4 digits) before the operating range needs to be changed. It meets International Electrotechnical Commission (IEC) safety standard 61010 and is certified for Category III installations up to 1,000V, which covers items used with enclosed building circuit installations (such as service panel parts, branch circuits, and fixed installations that are connected directly to a building's AC power supply).
Specifications
| Maximum alternating current (AC) input | 20 amp |
| Maximum direct current (DC) input | 20 amp |
| Maximum AC voltage input | 750 volts (V) |
| Maximum DC voltage input | 1,000V |
| Maximum resistance detected | 40 megaohms |
| Maximum capacitance detected | 40 millifarads (mF) |
| Maximum frequency detected | 40 megahertz (MHz) |
| Temperature measurement range | -50 to 1300 degrees C (-58 to 2372 degrees F) |
| Power supply | 9V battery (one, installed) |
| Standards met | European Conformity (CE) marked; Underwriters Laboratory listed; International Electrotechnical Commission (IEC) safety standard 61010-1 |
| Weight | 320 g/11.3 oz. |
| Dimensions | 198 x 90 x 40 mm/7.8 x 3.5 x 1.57 inches (H x W x D) |
H is height, the vertical distance from the lowest to highest point; W is width, the horizontal distance from left to right; D is depth, the horizontal distance from front to back.
Multitesters (also called multimeters) are electrical test meters that measure multiple properties of an electrical circuit, such as current, voltage, resistance, capacitance, and continuity. Available in handheld or benchtop models, multitesters diagnose electrical problems in electrical equipment, wiring, and power supplies. A variety of probes, clamps, and leads can be used to connect the meter to a circuit or device. Multitesters display information either in analog or digital form. Factors that influence meter choice include the electrical properties to be measured, the anticipated range of results, and the desired level of protection against transient voltages. Safety ratings are based on the International Electrotechnical Commission's (IEC) standards for low-voltage test equipment. IEC 61010 delineates four overvoltage installation categories. In general, a meter with a category IV rating will provide more protection against transient voltages than a meter with a lower category rating.
BK Precision manufactures test and measurement instruments for research and development, production-line testing, and electronic field service applications. The company, founded in 1951, is headquartered in Yorba Linda, CA. It meets International Organization for Standardization (ISO) standard 9001:2008 and is compliant with Restriction of Hazardous Substances (RoHS) and waste electronic and electrical equipment (WEEE) directives.
What's in the Box?
- BK Precision 390A average-sensing digital multimeter
- (1) Set test leads
- K-type thermocouple probe
- USB data cable
- Software
- 9V battery (installed)
- Spare fuse
- Instructions
9. MakerHawk USB C Meter Tester Type-C USB Multimeter Tester Current Power Capacity AMP Voltage Charger Load Impedance PD Digital Temperature Tester Voltmeter Ammeter Color TFT Display
Feature
Guide Video: https://www.youtube.com/watch?v=Xk7I8IFkt7k . USB Color Display Tester can monitor Voltage, Current, Capacity, Electric Quantity, Power, Temperature, Load Impedance, D+/D- Voltage, Charging Time and other data of USB, and supports Qualcomm QC3.0 compatible QC2.0, BC1.2, i P hone 2.4A and other protocol quick charging voltage ranges, support OTG function. 8192 Pixel TFT Color Display, two in one measurement of USB and Type-C.The download link of user manual and APP: https://drive.google.com/drive/folders/17hwjN1XjAeNLlPRnfzypTqluJ3TNrWIS?usp=sharing. Excellent appearance and color display data make the tester more personalized. Connect the android phone by via Bluetooth, check the charging status at any time on the phone, monitor the charging data in real time when charging and protect the phone intelligently.
1. USB-C male head replacement cost of copper pin contact plug better, tighter current data more reliable. 2.The screen 180 degrees flip display settings function, to adapt to some chargers using inverted display as a positive display. 3.the OTG protocol of Type-C can open the OTG digital function by inserting a random embedded Android switch head in the upper left corner of Android line.
4. The interface settings such as overvoltage, low voltage, overcurrent, backlight time, etc., and switch to the corresponding interface at the short button at the front desk, set up by adding double or three strokes. 5. The built-in PD protocol can open the Type-C interface with the PD protocol's intelligent charger unloaded power output display, so as to facilitate aging and testing. 6. The PD protocol quick charging mode measurement.
Note: 1. This is no communication version. 2. PC software support PC window(Win 7 and above) and Android Phone(Android 5.0 and above, support 12 kinds language(Chinese, English, Russia and so on)
Description
Specification:Voltage measuring range: 3.6V~32.0V Resolution Precision: 0.01V
Current measuring range: 0.00~5.10A Resolution Precision: 0.01A
Capacity cumulative range: 0~99999mAh Resolution Precision: 0.001Ah
Power cumulative range: 0~999999mWh Resolution Precision: 0.001Wh
Power metering range: 000.00~150.00 W Resolution Precision: 0.01W
Impedance Measuring range: 1~999.9 Resolution Precision: 0.1
Temperature Measuring Range: 0~80 Resolution Precision: 1
Maximum Timing: 999Hours 59Minutes 59 Seconds Resolution Precision: 1s
Timer Charging Reminder: Countdown 24 hours, set value arbitrary
USB D+ Voltage Range: 0V~2.999V Resolution Precision: 0.001V
USB D- Voltage Range: 0V~2.999V Resolution Precision: 0.001V
Full Charger Reminder Parameters of Mobile: andlt;2W/0.5Hours
Time to refresh: 500mS/ times
Measurement rate: 0.5 times/s
Alarm Mode: Siren Sound+ Display Hints
Product size: 61mm x 68mm x 10.8mm
Self-consumable flow: andlt;0.02A
Working temperature: -10~+60
Working humidity: 10~80(no doubt)
Pressure of work: 80~106kPa
Certificate: RoHS, CE
System:PC software support PC window (Win 7 and above) and Phone Android (Android 5.0 and above)
Package Including
1 * Color TFT Type-C PD USB Tester
Recent Comments