The 10 best buck converter step up 2019
Finding the best buck converter step up suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best buck converter step up
![[2-PACK] Adjustable DC-DC Converter Automatic Wide Boost Buck Voltage Regulator XL6009 DC to DC 5.0-32 V to 1.25-35 V Voltage Module Board](https://images-na.ssl-images-amazon.com/images/I/51tTuDCuWhL.jpg)
1. Gowoops 2PCS 150W DC-DC 10-32V to 12-35V Step Up Boost Converter Module Adjustable Power Voltage
Feature
Convenient for DIY -- You can use this module to DIY an output-adjustable car power supplyInput voltage: DC 10V-32V, Output voltage: DC12V-35V(adjustable)
Input current: 16A (MAX), Output current: 10A (MAX)
Conversion efficiency: 94% (For reference: when Input 19V 2.5A Output 16V)
Easily charging for 60W, 90W etc. laptops which is less than 150W, industrial grade ( -40 degree to + 80 degree) work temperature, suitable for AC adapter, power supply and so on
Description
Featrure:
Easy to drive 65W 90W dual-core notebook. Use a 12V battery drive 19V 3.42A notebook, the module temperature about 45
Conversion efficiency: 94% (For reference: when Input 19V 2.5A Output 16V)
Output Ripple: 2% (MAX) 20M-bandwidth
Operating Temperature: Industrial (-40 to +85) (ambient temperature exceeds 40c, lower power use, or to enhance heat dissipation)
Full load temperature rise: 45
No-load current: 25mA typical
Voltage regulation: 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: None (Please Install fuses and protection circuits at Input port.)
Input Reverse Polarity Protection: None (please comply with a reverse protection or connect a diode at input parts)
Specifiction:
Input voltage: DC 10V-32V
Output voltage: DC12V-35V(adjustable)
Input Current: 16A (MAX) (Please enhance heat dissipation if more than 10A)
Output Current: 10A (MAX)
Output power: natural cooling 100W (MAX), strengthening cooling 150W (MAX) real power
Module Properties: non-isolated step-up module (BOOST)
Size: 65mm x 35mm x 21mm
Package Includes:
2 x 150W Boost Converter
2. Buck Boost Converter, DROK DC-DC Auto Buck Boost Voltage Converter Step Down Step Up Volt Regulator CC CV Adjustable DC 5V-30V 5V 9V to 0.5V-30V 12V 24V Power Supply Transformer Module
Feature
DROK buck boost converter input voltage range is DC 5-30V, output voltage range is DC 0.5-30V, output current of natural cooling is 3A, with strength sinking output current can reach 4A.Automatically Boost or Buck: no matter the input voltage is higher than 12V or lower than 12V, the voltage can be steadily output 12V.
Constant Current: input any value within DC 5-30V, can directly charge storage battery, lithium battery, AA battery; besides, it can adjust LED brightness of constant current.
Setting Value of Constant Current without Multimeter: using one-loop potentiometer with scale to set the constant current value will be more easy.
Protective FunctionMOS-input anti reverse protective, under-voltage shutdown protection, output over-current protection.
Description
Parameters:Input voltage: DC 5~30V
Output voltage: DC 0.5~30V
Output current: 3A (Long-term stability work); 4A (strength sinking can reach)
Output power: 35W (naturally sinking); 60W (strength sinking).
Switch efficiency: Boost voltage 88~91%; Buck voltage 87~90%It will be changed according to voltage difference and load
Working frequency: 180KHZ
Board size: 68*29*21mm
Using Manual
The default factory output voltage is set to 12V and the default constant current value is set to 2A. Please adjust the output constant current value to prevent load damage.
The taller multi-turn potentiometer is used for adjusting the output voltage. The shorter single turn potentiometer is used for adjusting the constant current value. If you need to increase voltage or current, please adjust the corresponding potentiometers clockwise. To decrease, turn the corresponding potentiometers counter-clockwise.
Turn lights in full-chargeA red LED indicates constant current output. A blue LED indicates charging. A green LED indicates that the charging current is less than one-tenth the set value.
Application:
1. Very suitable for the device of large input voltage range and constant output voltage, such as constant voltage battery, solar power generation, power module.
2. Input a constant voltage (such as mobile phone charger or storage battery charging) can get DC 0.5~30V adjustable power.
Package Including:
1 X Auto Buck Boost Voltage Converter Module
3. Boost Buck Converter, DROK Numerical Control Buck Boost Voltage Power Regulator Module DC 6V-40V 24v to DC 0-32V 5v 12v Adjustable Step Down Step Up Volt Transformer Panel 5A 160W
Feature
DROK boost buck converter input voltage range is DC 6V-40V; output voltage range is DC 0-32V; output voltage range is 0-160W; the maximum input voltage is 10A; output current range is 0-5A.This numerical control voltage converter is characterized by that output voltage will always keep stable whatever input voltage is lower, higher than or equals to output voltage.
The volt regulator module is built with color LCD display, it will be convenient for you to review preset voltage, input voltage, output voltage, preset current, output current, output power and brightness of LCD.
Our step up down transformer is with this easy to operate converter, you can do voltage setting and current setting as quickly as possible; you can also set it to cut off output when over voltage, over current and over power.
The power supply stabilizer module is designed with cooling fan, it can well protect this converter and make it a long service life.
Description
Parameters:
Output voltage range: 0V-32.00V
Output current: 0-5.000A
Output power range: 0-160W
Product Weight: about 227g
Display module size: 79*43*41(mm)
Open size: 71mm*39mm
Power module size:93*71*41mm
Length of connecting line: 200mm
Fixed hole center distance: 86mm, 64mm
Max allowable input current: 10A
Output ripple: about 100mVpp
Temperature of the application environment: -10c ~45c
NOTE:
1. If you want to ensure full load output, you must make sure that input is higher than 18V and 180W; pay attention to heat elimination at full load.
2. The connection between the display part and the power part should be connected correctly according to the corresponding words. Otherwise, it will not work by the wrong connection.
Package Includes:
1 X Digital Boost Buck Converter
4. DROK DC-DC 6-32V to 0.8-28V 150W 15A Adjustable Boost/Buck Voltage Regulator 12V/24V Step-up/Step-down Volt Converter Stabilizer Rectifier Power Transformer Module
Feature
This module is non-isolated synchronous rectification boost/buck module, can switch smoothly and automatically between boost and buck, No require of min differential pressureSix-sided high quality aluminum shell, shock-proof and has good heat radiating effect
Equipped with supper bright LED indicator, the Green LED lights on when working and the red LED will be on when there is something wrong, make your operation convenient
With short-circuit protection and reverse connection protection, hence save to use
Connection: Pluggable terminal, 8 terminals on each side max current input of each terminal is 6A, please use multiple ports in parallel when large current
Description
Size: 83 (L) x 45 (W) x 19 (H) mm (excluding input and output terminals)Size: 101 (L) x 45 (W) x 19 (H) mm (including the input and output terminals)
Feature:
Module Properties: non-isolated buck-boost module (high efficiency)
Rectification: synchronous rectification
Input voltage :DC 6-32V (Rated Power, input voltage equal to 9V; if input 6v, output about 90W)
Lowest dropout: 0V (seamless automatic switching buck-boost, no minimum pressure requirements)
Output voltage :DC 0.8-28V (adjustable)
Output Current: 15A (MAX)
Output Power: 150W (MAX) (eg: output 12V 13A)
Conversion efficiency: Up to 97% (the higher the output voltage, the higher the efficiency, the smaller the pressure the higher the efficiency)
Soft-start time: 500mS
Remote control port: Yes, ON/OFF, (Connect 0V, closed), (Connect 5V or Vacant, work).
Output ripple: 1% (MAX), 20M-bandwidth
Operating Temperature: Industrial (-40c to +85c) (if ambient temperature exceeds 40 c, please lower power use, or to enhance heat dissipation)
Full load temperature rise: 40c
Load regulation: 1%
Voltage regulation: 0.5%
Dynamic response speed: 5% 200uS
Short circuit protection: Yes, output current limiting (current limit of about 17A)
Input Reverse Polarity Protection: Yes
Input over-voltage protection: Yes, over-voltage protection is 33V, the maximum input voltage can not exceed 36V.
Indicator: Yes, working properly (Green), not working or protection (Red)
Connection: Removable terminal, The eight input and output terminals,Maximum current per port 6A, Please use multiple ports in parallel when large current.
Package Includes:
1 x DC/DC Converter
5. Aideepen XL6009 Boost Buck DC Adjustable Step Up Down Converter Module Solar Voltage
Feature
Model specificationDSN6000AUD XL6009 buck step up moduleModule propertiesnon- isolated boost (BOOST)
RectificationNon- Synchronous rectification
Conversion efficiency< 94% ( greater the pressure , the lower the efficiency )
Regardless of the input voltage is 5V or 12V or 32V, the output can be stabilized at 12V
Description
Auto start voltage will be pulled down to 7V less or smaller engine at high speed when the voltage up to 15V or higher. For 12V electrical work hard at work, this automatic buck module solves this problem , regardless of the input voltage is 5V or 12V or 32V, the output can be stabilized at 12V.Wide input voltage 5V ~ 32V;
Wide Output Voltage 1.25V ~ 35V ( with automatic buck , scope of work, any voltage inputs can be arbitrarily regulated voltage output ) ;
Built- 4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
high switching frequency of 400KHz, the ripple is smaller and smaller . (LM2577 frequency only 50KHz)
Application:
Car regulator , solar photovoltaic, wind power and other applications of voltage instability .
Technical parameters:
Model SpecificationDSN6000AUD Automatic Buck module
Module PropertiesNon- isolated boost (BOOST)
RectificationNon- Synchronous Rectification
Input Range3.8V ~ 32V
Output Range1.25V ~ 35V
Input Current3A ( max ) , no-load 18mA (5V input , 8V output , no-load is less than 18mA.
Higher the voltage , the greater the load current . )
Conversion efficiency< 94% ( greater the pressure , the lower the efficiency )
Switching frequency400KHz
Output Ripple50mV ( the higher the voltage , the greater the current , the greater the ripple )
Load Regulation 0.5%
Voltage Regulation 0.5%
Operating Temperature-40 ~ +85
Package Included:
1* XL6009 Boost Buck DC Converter
6. [2-PACK] Adjustable DC-DC Converter Automatic Wide Boost Buck Voltage Regulator XL6009 DC to DC 5.0-32 V to 1.25-35 V Voltage Module Board
Feature
Wide input voltage: 5V-32V; Wide Output Voltage: 1.25V-35V(with automatic step-up and down, within the scope of work, any voltage input can be regulated any voltage output)Model specificationXL6009 step up down Converter module
With 4A high efficiency MOSFET switches, the efficiency of XL6009 can be up to 94%
With ultra high switch frequency 400KHz , even if small capacity filtering capacitors can achieve very good results
Application:Car regulator , solar photovoltaic, wind power and other applications of voltage instability .
Description
Product FeaturesAuto start voltage will be pulled down to 7V less or smaller engine at high speed when the voltage up to 15V or higher. For 12V electrical work hard at work, this automatic buck module solves this problem , regardless of the input voltage is 5V or 12V or 32V, the output can be stabilized at 12V.
Parameters:
Wide input voltage: 5V-32V
Wide Output Voltage: 1.25V-35V
Built- 4A efficient MOSFET switches enable efficiency up to 94%; (LM2577 current is 3A)
high switching frequency of 400KHz, the ripple is smaller and smaller . (LM2577 frequency only 50KHz)
Input Current: 4A(MAX); no-load 18mA (5V input , 8V output , no-load is less than 18mA.Higher the voltage , the greater the load current)
Output Ripple50mV ( the higher the voltage , the greater the current , the greater the ripple )
Load Regulation 0.5%
Voltage Regulation 0.5%
Operating Temperature-40 ~ +85
Size: 48.1x24.9x14.0 mm
Weight: 17g
Application:
1.Car regulato
2.solar photovoltaic
3.wind power and other applications of voltage instability
How to use
1.Access the power supply (5-32V), the power indicator light, the module is working properly.
2.Adjust the blue potentiometer knob (usually clockwise rotation boost, counterclockwise rotationStep-down) and monitor the output voltage with a multimeter to reach the required voltage.
3.A customer reflects the module output voltage can not be adjusted, always equal to the input voltage. When you encounter this problem, please first counterclockwise rotation potentiometer 10 laps above, and then use the module can be normal adjustment of the voltage
7. Boost Buck Converter, Yeeco Auto Buck-Boost Board Numerical Control Step Up Down DC 10V-40V 12v 24v 36v to 0-38V 5v 9v 6A 240W Adjustable Constant Current Voltage Regulator Power Power Supply Module
Feature
Yeeco buck-boost converter,DC DC Digital Boost Buck Voltage Regulator, input voltage range: DC 10-40V and output: 0-38V, high power, high efficiency and stable workingThe voltage regulator module adopt advanced microprocessor control, you can adjust the voltage and current accurately by using the button, the voltage regulator has constant current & voltage output function
This boost buck converter module,4 digit LED digital display provided for you so that you can monitor the output voltage, current; What is more, this digital step up/ down module has LED indicators that you can monitor the working statues in real-time
Our boost buck constant current regulator can be set automatically output after powering on and has memory function which can store 10 groups of data and you can also store or call out the data if you need
The boost buck dc adjustable step up down converter;Dimention: 100mm(length)x80mm(width)x21mm(height); Note: please correctly connect the input, output termianls and make sure that the input voltage is within the range, do not connect reversely
Description
Product Parameter:
Product Property: No-isolated boost buck
Input Voltage: 10-40V
Output Voltage: 0-38V
Conversion efficiency: Maximum 80%
Working Frequency: 150KHz
Short-circuit Protection constant current
Working Temperature: -40- +85
Control Method: Numerical control + Digital display
Voltag Adjustment/Display Resolution: 0.01V
Power Display Minimum Resolution: 0.001W
Current Adjustment/Display Resolution: 0.001A
Capacity Display Minimum Resolution:
Output Ripple: 50mV
Wiring Method: with wiring terminals
Dimention(LxWxH:100x80x29mm
Package include:
1xBoost Buck Converter
8. Buck Boost Converter Display, DROK Buck-Boost Board DC 5.5-30V 12v to DC 0.5-30V 5v 24v Adjustable Constant Current Voltage Step UP Down Voltage Regulator 3A 35W Power Supply Module
Feature
DROK buck-boost converter input voltage range is DC 5.5-30V; output voltage range is DC 0.5-30V, can be arbitrary adjustable; output current range is 0-3A, can be arbitrary adjustable, if enhance heat dissipation, it can reach 4A; max output power is 35W, if enhance dissipation, it can reach 50W.LCD Display: the voltage regulator module is designed with LCD, can display input and output voltage, output current and output power; voltage display resolution is 0.05V, current display resolution is 0.005A.
Safe Protection: the volt transformer board is with reverse connection protection at input terminal, reverse connection will not burn; stop the current from feeding back protection at output terminal; short circuit protection.
Application: the switching power supply can be used as an ordinary buck-boost module with over-current protection; used as a battery charger; used as a high-power LED constant current driver module.
Button Control: button control output voltage ON / OFF status, and you can set the default output state is ON or OFF of the next time power-on.
Description
Parameters:
Input voltage range: DC 5.5-30V (when the input voltage is 5V, the boost and buck can be achieved, but the voltage and current measurement is inaccurate; under 4.7V, under voltage protection will be activated)
Output voltage range: DC 0.5-30V
Output current: can stably work at 3A for a long time, when enhance heat dissipation can reach 4A
Output power: 35W (natural cooling), when enhance heat dissipation can reach 50W
Voltage display resolution: 0.05V
Current display resolution: 0.005A
Conversion rate: about 88%
Soft start: Yes, (a large power load module may fail when it is started)
Input reverse connection protection: yes
Output stop the current from feeding back protection: yes
Short circuit protection: yes
Working frequency: 180KHZ
Size: 66 * 48 * 21mm
Mounting hole: 4mm in diameter
Package Including:
1x Buck Boost Converter Module
9. Icstation DC to DC Voltage Regulator Step Down Up Power Supply Converter Module 3.5V-28V to 1.25V-26V 3A LM2596 XL6009
Feature
Icstation DC Step Up and Down Power Supply Module enable to support step up and step down voltage, the voltage regulator module equiped with high quality XL6009E and LM2596S buck and boost converter chip.Rated parameters: Input voltage: DC 3.5V to 28V, Input current: 1A; Output voltage: DC 1.25V to 26V, Output current: 1A.
Absolute Maximum Rating: Input voltage: DC 32V, Input current: 3A; Output voltage: DC 32V, Output current: 3A.
Module size: 53 x 38 x 15 mm / 2.09 x 1.50 x 0.59 inch (L*W*H).
--- Replacement for free in 30 days, please send an email to our service team, in case you received broken components or defective item, or if you have any question in using, we will follow up your order in 12 hours, please rest assure to purchase and test this module.
Description
Icstation DC voltage regulator module is equipped with high quality XL6009E and LM2596S converter chip which enable to support step up and step down voltage, regulating function ideal for DIY power supply.Specifications:
(I) Rated parameters:
Input voltage: DC 3.5V to 28V, Input current: 1A
Output voltage: DC 1.25V to 26V, Output current: 1A.
(II) Absolute Maximum Rating:
Input voltage: DC 32V, Input current: 3A
Output voltage: DC 32V, Output current: 3A
Module Size: 53 x 38 x 15 mm / 2.09 x 1.50 x 0.59 inch (L*W*H)
Package Included: 1X DC Step Up and Down Power Supply Module
Steps: Connect to power source, adjust the swirl button on the blue potentiometer and monitor voltage with multimeter to get the needed voltage.
10. DROK 5-32V to 1.2-36V DC to DC Voltage Converter Regulator, 2A Adjustable Buck Boost Transformer, High Efficiency Step Up & Step Down Voltage Stabilizer Adapter with LED Digital Display
Feature
WIDE RANGE CONTINUOUSLY ADJUSTABLE: DROK buck boost voltage regulator stabilizer is able to tolerate the widest continuously adjustable voltage range (DC 5-32V to DC 1.2-36V), no differential pressure.SIMPLE KNOB OPERATION: This up down converter is provided with sensitive knob for you to adjust the voltage, handy and easy.
LED DIGITAL DISPLAY: With clear & high-quality LED monitor, DROK voltage regulator is not only a digital converter but also can be a voltage tester, handy for you to check the voltage value.
LARGE CAPACITANCE, LOW RIPPLE: Our voltage adapter adopts high quality large capacitance, which is with high-frequency filter, low voltage ripple and flat output voltage.
MULTIPLE PROTECTION: Our electric converter owns over-temperature protection, input reverse connection protection, output short-circuit protection, effectively protecting the module and your device from damage.
Description
Product Features:Our voltage regulator has large-capacitance high-frequency filter, low voltage ripple, and flat and straight output voltage.
It is provided with high conversion efficiency which is up to 96%, low heating.
With over-temperature protection, it will automatically close the output when exceeding the temperature.
It can be used for power supply and charger of various electronic equipments
Product Parameters:
Input Voltage: 5-32V
Output Voltage: 1.2-36V (Adjustable)
Output Current: 2A (Related to power of power supply)
Display: 3 Digits
Conversion Efficiency: 96%
Input Reverse Polarity Protection: Yes
Output Short-circuit Protection: Yes
Dimension: 90 * 64 * 34mm
Note: It's forbidden to exceed voltage and make short circuit.
Package Included:
1 x Voltage Regulator
Recent Comments