The 10 best carb stone lid for 2019
Finding the best carb stone lid suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best carb stone lid
1. The Weekend Brewer CarbKegLid Carbonation Keg Lid, Stainless Steel
Feature
SHAKE NO MORE with this convenient kit that makes force carbonating your corny keg a breeze. Simply assemble the lid, dip tube, and stone, install on your cornelius keg. Use your CO2 system to easily inject CO2 into your homebrew.STAINLESS STEEL construction ensures long term durability and reliability. 304 Stainless steel makes sanitation easy. High quality FDA grade Bevlex tubing prevents any off flavors from imparting on your beer.
CARBONATION STONE makes carbonation easy and efficient. 0.5 microns is the perfect size to force carbonate everything from a belgian to a stout.
Fits all oval lid ball lock kegs and includes a lid sealing O-ring and relief valve. Does not fit racetrack style lid openings.
Includes carbonating keg lid, 0.5 micron diffusion stone, and 2' of 1/4" ID food grade vinyl tubing.
Description
This kit allows you to inject C02 into your kegged beer from the bottom, and have it permeate up through the beer in fine bubbles for rapid carbonation (3-6 hours if the beer is 40 F. or less and gas pressure is 20 PSI). Fits all oval lid kegs and includes a lid sealing O ring and relief valve.2. Ferroday Carbonation Keg Lid, Stainless Steel Carbonation lid With 2 Micron Diffusion Air Stone & 19.68 Inch Hose
Feature
Food Grade Material Carbonation keg lid & 2 micron diffusion stone is made of 304 stainless steel.The pressure release valve is stainless steel & plastic. 19.68 inches tube is made of food grade siliconeFit For All Kinds Of KegThis carbonation lidcan use for beer keg that require the standard oval lid (cornelius keg,corny keg,soda keg,pepsikeg,coca cola keg and so on). Replace your old bent,dented,or leaking lids
A Removable Gas Ball Lock PostOur carbonation keg lid has a gas connection post which can attach to ball lock disconnect.Can inject C02 into your beer keg by this ball lock post
Automatic Pressure Release Valve The pressure relief valve will automatically open up at 70 psi. The carbonation lid maximum bear pressure is 130 PSI (900 kPa)
How To Sanitize & Clean Before and after each use,you can take the keg lid & 19.68 inch hose into into acid sanitiser solution to sanitize.And the 2 micron diffusion stone needs to be boiled in water to sanitize & unclog the pores
Description
How to use this carbonation keg lid kit?The center of the keg lid has a ball lock keg post,need you attach the gas quick disconnect on it.
and then inject co2 into keg to carbonate your beer (co2 absorbs better when cold 34-40F)
Our keg lid has a 8mm barbed pillar on the underside. Let our hose attach this barbed pillar.
Take 2 micron diffusion stone insert into hose on the other side to carbonate your beer
How to make your beer get a unique mouth-feel?
The nature of the aeration stone is that it breaks up the gas feed into tiny bubbles to quickly carbonation of the beer.
Less time is required to achieve the same beer/gas exposure using this carbonation keg lid kit
Please Note:
When you want to clean & store our keg lid after carbonation ,
please use a standard lid replace our keg lid
Easy and speedy carbonation,quick and without shake when you use this kit to carbonate,
you can enjoy your beer almost immediately
Package Include:
1* Carbonation Keg Lid
1* Diffusion Stone
1* 19.68 Inch Hose
3. OneBom Lid for Beer Brew, Cornelius Keg Lid Stainless Steel with 20 Food Grade Silicon Tube & 2 Micron Diffusion Stone
Feature
WELL MADE - Constructed from FOOD GRADE stainless steel not only for great looks but also for strength and longevity.NO MORE SHAKING - No need to shake your keg with this keg lid kit. The keg lid with built-in carbonation stone! Move the lid from keg to keg to carbonate as needed.
MULTIPURPOSE - Carbonate beer, soda, water, juice, and even tonic or seltzer water at home; Can be used for carbonation or as a replacement for your current, worn out keg lid
EASY TO USE - It is science the submerged stone will speed things up slightly and give you a finer carbonation; By using the diffuser at the bottom of your keg, the tiny bubbles of gas are dispersed through the water and are absorbed much faster; Clean after each use and make sure that the post is tightened to prevent leaks
100 90 DAY MONEY BACK GUARANTEE - If you are not satisfied for any reason, simply return the products for a full refund, no questions asked. You have nothing to lose.
Description
Carbonation Lid for Corny Keg Stainless Steel with 2 Micron Diffusion Stone and 20'' Silicone TubeDescription
If you use a keg, cooler, and tap for carbonated drinks, the Stainless Steel Keg Lid, Tubing, and Stone Diffuser Water, Soda, Beer Homebrew CO2 Carbonation Cornelius Kegerator is a needed system upgrade.
This lid creates an easy, effective beverage force carbonation process with no need to shake your keg. It has never been easier to carbonate beer, soda, water, juice, tonic, or seltzer water at home.
For best results, chill the beverage beforehand so the CO2 absorbs faster and you are ready for your weekend bash.
How to Use?
To use, install the lid on your beer keg and chill the keg to 40 degrees Fahrenheit or colder. When the keg has been chilled, attach the gas line to the post on the lid and set the dispensing pressure to 25 PSI.
After 6 hours, remove the gas line. Attach your gas line to the gas in post on your keg and release the head pressure in the keg so it is around 6-8 PSI. Your beer will now be carbonated, and you can adjust your gas to whatever pressure you want to dispense at.
Package Includes:
1 x Cornelius Style Carbonation Lid
1 x 2 Micron Air Stone
1 x 20'' Silicon Tube (ID x OD :1/4''x5/16'')
Warm Tips:
Release pressure to remove lid
Working pressure 80 PSI (550kPa)
CO2 absorbs better when cold 34-40F
After your beer is carbonated replace the carbonation lid with a standard lid. Clean and store carbonation lid.
4. UP100 Homebrew Cornelius Style Keg Carbonation Lid Kit With 0.5 Micron Diffusion Stone
Feature
Stainless steel 0.5 Micron Carbonation Diffusion StoneKeg Lid with stainless Ball Lock Post, Silicon Keg lid Seal
Replace your old bent,dented,or leaking lids.
Easy Speedy carbonation. No need to shake your keg with this keg lid kit.
Release pressure to remove lid. Working pressure 130 PSI (900 kPa)
Description
Install the kit into the opening of a keg and simply attach gas disconnect to the tank plug on the lid. Set the regulator to the desired CO2 setting and wait until desired carbonation level is achieved in the beverage.The Carbonation Lid Kit provide the quickest and easiest means of force carbonating kegs and begin serving beer swiftly. Fits all normal Corny kegs. The keg lid with built-in carbonation stone! Move the lid from keg to keg to carbonate as needed.
This lid allows fast force carbonation with the minimum of effort. The lid comes with 2 feet hose and stone already attached.
5. Stainless Steel Keg Lid, Tubing, and Stone Diffuser Water, Soda, Beer Homebrew CO2 Carbonation Cornelius Kegerator
Feature
NO MORE SHAKING: The G. Francis Stainless Steel Keg Lid, Tubing, and Stone Diffuser - Water, Soda, Beer Homebrew CO2 Carbonation - Cornelius Kegerator creates an easy and effective beverage carbonation process with no need to shake your keg; If you use a keg, cooler, and tap for carbonated drinks, this carbonation lid is a needed system upgradeMULTIPURPOSE: Carbonate beer, soda, water, juice, and even tonic or seltzer water at home; Can use for carbonation or as a replacement for your current, worn out keg lid
BUILT TO LAST: Constructed from stainless steel not only for great looks but also for strength and longevity
USE YOUR OWN KEG: Fits Cornelius (corny) kegs and similar standard homebrew kegs; Includes approximately 20-inch long tubing with diffusion stone and 4-3/8" x 3-3/4" inch oval lid diameter with a ball lock (Keg and gas line assembly required, not included)
EASY TO USE: It is science - the submerged stone will speed things up slightly and give you a finer carbonation; By using the diffuser at the bottom of your keg, the tiny bubbles of gas are dispersed through the water and are absorbed much faster; Clean after each use and make sure that the post is tightened to prevent leaks
Description
If you use a keg, cooler, and tap for carbonated drinks, the G. Francis Stainless Steel Keg Lid, Tubing, and Stone Diffuser - Water, Soda, Beer Homebrew CO2 Carbonation - Cornelius Kegerator is a needed system upgrade. This lid creates an easy, effective beverage force carbonation process with no need to shake your keg. It has never been easier to carbonate beer, soda, water, juice, tonic, or seltzer water at home. By using the diffuser at the bottom of your keg, the tiny bubbles of gas are dispersed through the beverage and are absorbed much faster. Clean after each use and make sure that the post is tight to prevent leaks. For best results, chill the beverage beforehand so the CO2 absorbs faster and you are ready for your weekend bash. Keg and gas line assembly required, not included. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.6. UP100 Carbonation Corny Beer Keg Lid Cornelius Style in-Built Pin/Ball Lock Gas Disconnect Homebrew Kegging
Feature
This universal replacement lid for soda kegs (corny kegs) is completely new--not refurbished.It fits all ball-lock and pin-lock soda kegs that require the standard oval lid.
It has a replaceable pressure relief valve and includes the NEW rubber O-ring, ball lock post with poppet valve.
Material: stainless steel
New oval keg lid with O-ring
Description
UP100 store7. Corny Keg Lid, New Replacement Soda Keg Lid, Cornelius Keg Lid, Carbonation Keg Lid, Stainless Steel Carbonation Lid, Cornelius Style Keg Carbonation Lid Kit with 0.5 Micron Diffusion Stone By MRbrew
Feature
The carbonation lid allows home brewers to force carbonate their kegs so that they can serve beer quicker than usual. Carbonation lids are meant to be used with a micron stone, so it can be moved from one keg to another. This removes the hassle of attaching and removing the line from the dip tube. With this lid, you can simply connect the gas quick disconnect to the fitting on the lid for the carbonation to start.This MRbrew Carbonating Keg Lid is a corny keg lid with an extra CO2 bulk head that comes complete with two feet of 1/4" tubing, two worm drive clamps, and a 0.5 micron carb stone. This allows you to inject CO2 into your kegged beer from the bottom and have it permeate up through the beer in fine bubbles for rapid carbonation.
2' tube food grade silicone tube. The flexible tubing, as opposed to rigid tubing, allows the lid inserted into any cornelius style keg. The top of the lid has a "gas in" ball lock body connect welded in place that works with gas quick disconnects.
The keg lid includes a pressure relief valve and a lid sealing O ring, and fits kegs with 3" by 3-1/2" oval lids. Carbonation keg lid & 0.5 micron diffusion stone is made of 304 stainless steel.The pressure release valve is stainless steel.
We have a Satisfaction Guarantee. Letting you know that you have a free replacement or full refund in the case of you being unsatisfied with any part of your Lid. Without you having to go to the post office or pay for postage in every case.
Description
How to use this product:Beer must be stored cold 34-40F
1. Preboil the stone for 2-3 minutes before using. This assures you that your stone is sterile and any residual oils have been boiled off.
2. Sanitize the whole keg lid before submersing into your keg filled with beer.
3. Set your PSI on your regulator to 3-4psi and attach your gas in fitting to the body connect on the lid. Leave keg at this pressure for 1 hour.
4. Raise your pressure 2PSI per hour until you reach 10-12psi. Leave it at 10-12psi for 24 hours. Pour a pint and test the carbonation. If you think your beer needs more CO2 leave for another 4-6 hours and have another pint.
5. Remove carbonation lid after carbonation level is satisfactory. Return original keg lid for long term storage.
Features:
-Cornelius Keg Lid with under mounted 5/16" Barb
- a pressure relief valve and a lid sealing O ring
-2' of (flexible) Antimicrobial Tubing
-.5 Micron 1/4" Barb Carbonation Stone
-Top Mounted Gas Ball Lock Post
8. Carbonation Keg Lid, Wrewing Cornelius Type Keg Replacement Lid with Gas Ball Lock Post for Homebrew Beer Soda Carbonate
Feature
Made of 304 stainless steel, rust resistant, durableUniversal replacement lid, fits all normal Corny kegs
With gas ball lock post, used for beer/soda carbonating
Pull the pressure relief valve to degas before opening the lid
Customer Promise: 30-day money refund guarantee & 12-month warranty, contact us freely if any doubts
Description
This keg lid with gas ball lock post is used for beer carbonating, replace it with a standard keg lid after carbonation, clean and sterilize before and after each use. Package include 1 x Carbonation Keg Lid9. Carbonation Lid,Cornelius Style Keg Carbonation Lid, Ball Lock Lid, Home Brew Keg Lid With 20" Silicon Tube & 2 Micron Diffusion Stone (Universal Lid)
Feature
Well Made & Great Quality Keg lid and diffusion stone is made from stainless steel. keg lid valve is plastic. 20 Inch Tube is food grade siliconeA Standard Carbonation Lid Fits cornelius (corny) kegs and similar standard homebrew kegs. Our keg lid is the standard oval lid
Come With 20" Tube & 2 Micron Diffusion Stone Tube can attach to the dip tube.Take 2 micron diffusion stone insert into hose on the other side. Finally getting the lid into the keg to carbonate your beer
How To Check Leaks Or Not After injecting some CO2 in your keg, you can sprayed down the lid area with sanitizer to check for any leaks. You will see no bubbles, proving our keg lid is no leaks
1 Year Guarantee Place your order without any worry.If any issue happens to your bag in the first 12 months, We can replace a new one for you without any fee
Description
How to use our keg lid for your carbonating1. Filled the keg with beer and put the the sanitized carbonation lid on
2. Put your co2 up to 30 psi in the post on the keg to set the lid. Then purged the keg of oxygen
3. Set the co2 to about 8psi until not hear it filling the keg any longer and then removed the co2 line from the keg post and put it on the lids post
4. Set it at 4 psi. Then raised it 2 psi every hour until about 12psi
5. Letting the keg with the carbonation lid do its job for about 24 hours
6. Purged the keg and removed the lid for storage. Put your regular lid on and turned your co2 back up to 12 psi
Features:
Can use for carbonation or as a replacement for your worn out keg lid
Attached the gas line setup to the ball lock keg post on the carbonation lid
Pre-boil the stone for 2-3 minutes before using. This assures you that your stone is sterile
Pressure relief valve opened up at 70 psi,you also can manually release by pulling up on the pressure relief valve
Package :
1* Carbonation Keg Lid
1* Diffusion Stone
1* 20 Inch Hose
10. Cornelius Style Keg Carbonation Lid Kit With .5 Micron Diffusion Air Stone
Feature
Fits all normal Corny kegsWith 0.5 Micron Carbonation Stone
Replace your old bent,dented,or leaking lids
Stainless steel construction
Speedy carbonation
Description
The Carbonation Lid Kit provide the quickest and eariest means of force carbonating kegs and begin serving beer swiftly. Fits all normal Corny kegs.
Includes:
1. 1 x Brand New Cornelius Style Carbonation Lid
2. 1 x 0.5 Micron Carbonation Stone
3. 1 x Beer Line
Caution:
1. Release pressure to remove lid.
2. Working pressure 130 PSI (900kPa)
Recent Comments