The 10 best fasteners drywall for 2019
Finding the best fasteners drywall suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best fasteners drywall
1. 12 Pieces TOGGLER SNAPTOGGLE Drywall Anchor with included bolts for 1/4-20 Fastener size; holds 80 pounds each by TOGGLER
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 1/4"-20 UNC-threaded bolts
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt (included)
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
Mount anything!The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 1/4"-20 UNC bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 1/4"-20 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
2. TOGGLER Toggle TB Residential Drywall Anchor with Screws, Polypropylene, Made in US, 3/8" to 1/2" Grip Range, For #6 to #14 Fastener Sizes (Pack of 20)
Feature
Residential drywall anchor provides a firm hold from within 3/8"- to 1/2"-thick drywallAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes #8 x 1-1/2" screws
Ultimate tensile strength is 143 lb. in 1/2" drywall with a #8 x 1-1/2" screw
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER Toggle TB residential drywall anchor provides a firm hold in 3/8"- to 1/2"-thick drywall, includes #8 x 1-1/2" screws, and is made in USA. The anchor is made from polypropylene that resists corrosion, is nonconductive for anchoring electrical components, and is low-friction to facilitate screw installation. The anchor hammers into a 5/16" drilled hole until flush with the mounting material's surface. Before the screw can be inserted into the anchor to create a secure hold, the included key is used to open the anchor's wings behind the material. The fins on the anchor head grip the mounting material to prevent spinning when a screw is inserted, and the anchor will stay in place if the fastener is removed, facilitating fixture and screw changes. If using screws other than those supplied, the anchor accepts #6 to #14 size screws with a minimum thread length of 1-1/4". The Toggle TB anchor meets Federal Specification FF-B-588-D for Type IV anchors.
Specifications
Ultimate Tensile Strength Values
Anchor | Drill Diameter | Screw Description | 1/4" Plywood | 1/2" Plywood | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
TA | 5/16" | #8 x 1-1/4" | 124 lb. | Not applicable | Not applicable | Not applicable | Not applicable |
TB | 5/16" | #8 x 1-1/2" | Not applicable | 175 lb. | 97 lb. | 143 lb. | Not applicable |
TC | 5/16" | #8 x 1-3/4" | Not applicable | Not applicable | Not applicable | Not applicable | 159 lb. |
Ultimate Shear Strength Values
Anchor | Drill Diameter | Screw Description | 1/4" Plywood | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
TA | 5/16" | #8 x 1-1/4" | 265 lb. | Not applicable | Not applicable | Not applicable |
TB | 5/16" | #8 x 1-1/2" | Not applicable | 126 lb. | 167 lb. | Not applicable |
TC | 5/16" | #8 x 1-3/4" | Not applicable | Not applicable | Not applicable | 237 lb. |
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (20) TOGGLER Toggle TB anchors
- (20) #8 x 1-1/2" screws
- (1) Setting key
3. WingIts RC-MAWSD35-6 Master Anchor Super Duty for Drywall, 10/32-Inch Stainless Steel Screw, 6-Pack
Feature
Our patented WingIts' Fasteners with Hook Plates will NEVER LoosenInstalls in all hollow walls in just minutes and lasts a lifetime
Objects can be easily removed and replaced
Even works in the holes created by others failure
Install using the Apache200 Drill Bit (RC-WA200GTS34) to drill through the material easily with your cordless drill
4. KIRIN Drywall Anchors with Stainless Steel Screws Heavy Duty Hollow Wall Anchor Screws for Sheetrock Plywood - 50 Sets
Feature
The Heavy Duty Drywall anchor screw kit can be using for hanging bathroom and kitchen heavy accessories, shelving, light fixtures, mirrors, picture frames, or more.Hold 1/4" - 3/8 " thick drywall, plywood or sheetrock; Includes 2 setting keys.
It is strong, solid and sturdy, exquisite workmanship, convenient to use and easy to install.
Pre-drills precise hole in gypsum wall board - No hole preparation required, Constructed from durable plastic to last for years. Can be easily removed.
100% Satisfaction Guarantee - Customer satisfaction is our Top Priority. If you have any question please contact us anytime. We want our customers to be 100% satisfied.
Description
Feature:This anchor screw kit includes 50 sets of anchors and screws
Includes 2 setting keys for quick installation
Heavy duty hollow wall anchors provides sturdy grip in drywall, panels or hollow walls
M4 x 40mm stainless screws, corrosion resistant to ensure a long lifetime
Install Instructions:
1.Fold the anchor
2.Drill a hole
3.Stick the anchor into the hole
4.Use the setting key to pop the anchor open
5.Screw your accessories
Specification:
Anchor size: 9 x 18 mm
Screw size: M4 x 40mm Package Include:
50 x drywall anchors
50 x M4 screws
2 x setting keys
5. Rustark 24Pcs 35/46/59mm Heavy Duty Zinc Plated Steel Long Molly Bolt Drive Fasteners Hollow Wall Drive Anchor Screws Assortment Kit for Drywalls Hanging Walls Paneling or Ceilings
Feature
WHAT YOU GET-- We will prepare 24-pcs hollow wall drive anchors screw, package in durable plastic transparent box, convenient for your use and storage, there are 3 sizes selected for you, 36 mm; 46mm; 59mm. You can choose one of sizes to meet all your needs.DURABLE AND STURDY-- These hollow wall drive anchors are manufactured with top-class material, they are made of high quality zinc plated steel, sturdy structure, rust resistance and corrosion resistance, durable and reusable, the precise construction will ensure its work in highly performance.
WHERE TO USE -- Widely used for hanging curtain rods, lamps, photo frames, coat racks, power switches, etc. You can hang all kinds of stuff on the walls that can help you save space and energy. these are quality drywall anchors at a good value, it will become your preferred style of wall anchor when studs are not available.
HOW TO USE-- The operation process is simple and effortless, when you use them, firstly, hammer them into the desired place until they are flush with the wall, then, take your power screw driver and pulse the screw in until there is resistance, last, take the screw out, the whole process is well done, easy to install and use. It can save your time and energy.
AFTER-SALE SERVICES -- We will provide you with reliable after-sales service. If you are unhappy with our product fro any reason or have any questions, please feel free to contact us, I will reply you within 12 hours and we will solve them for you soon. Please set your heart at rest to purchase.
Description
Specifications:Material: zinc plated steel
Color: Silver
Sizes: 35mm,46mm,59mm
Quantity: 24-pcs hollow wall drive anchor screws. (3 sizes)
Feature
--Widely used for hanging curtain rods, lamps, photo frames, coat racks, power switches, etc.
--They are made of high quality zinc plated steel, sturdy structure, rust resistance and corrosion resistance, durable and reusable.
--Assortment kit includes 24-pcs 3 sizes hollow wall drive anchor screws.
Use Method:
1.hammer them into the desired place until they are flush with the wall
2.take your power screw driver and pulse the screw in until there is resistance
3.take the screw out
Package Includes:
10Pcs 35mm Hollow wall drive anchors
8Pcs 46mm Hollow wall drive anchors
6Pcs 59mm Hollow wall drive anchors
Note
The product have shape parts, in case of injury, please keep away from children.
6. TOGGLER SNAPTOGGLE BA Toggle Anchor with Bolts, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 3/16"-24 UNC Fastener Size (Pack of 10)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and includes 3/16"-24 UNC-threaded bolts
Ultimate tensile strength is 238 lb. in 1/2" drywall and 802 lb. in concrete block with a 3/16"-24 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BA toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, includes 3/16"-24 UNC-threaded bolts, and is made in USA. The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. If using bolts other than those supplied, the anchor accepts 3/16"-24 UNC metal bolts with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting one of the included bolts through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength Values | Ultimate Shear Strength Values |
1/2" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 238 lb. | 247 lb. |
5/8" Drywall | 1/2" | 3/16"-24 UNC zinc-plated steel | 356 lb. | 298 lb. |
1/2" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 412 lb. | Not Available |
5/8" Drywall with 25 Gauge Stud* | 1/2" | 3/16"-24 UNC zinc-plated steel | 462 lb. | Not Available |
Concrete Block | 1/2" | 3/16"-24 UNC zinc-plated steel | 802 lb. | Not Available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (10) TOGGLER SNAPTOGGLE BA toggle anchors
- (10) 3/16"-24 UNC bolts
7. TOGGLER SnapSkru SP Self-Drilling Drywall Anchor with Screws, Glass-Filled Nylon, Made in US, For #6 to #10 Fastener Sizes (Pack of 50)
Feature
Self-drilling anchor installs into 3/8"- to 5/8"-thick drywall ceilings and walls without requiring a predrilled holeGlass-filled nylon body has jaws that open to provide a firm vibration- and shock-resistant hold when a screw is inserted
Made in USA, and includes #8 x 1-1/2" screws
Ultimate tensile strength is 79 lb. in 1/2" drywall with a #8 x 1-1/2" screw
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SnapSkru SP self-drilling drywall anchor installs into 3/8"- to 5/8"-thick drywall ceilings and walls without requiring a predrilled hole, includes #8 x 1-1/2" screws, and is made in USA. Its corrosion-resistant glass-filled nylon body installs into drywall with a Phillips driver, a hand drill, or a screw gun. The anchor's positive stop mechanism prevents the anchor from being driven too far into the drywall. Inserting an included screw activates the anchor's jaw, locking the anchor into place and compressing the drywall for a vibration- and shock-resistant hold. The jaws emit a noise when activated, providing audible confirmation that the anchor system has been installed successfully. If using screws other than those supplied, the anchor accepts #6 to #10 size sheet metal screws with a length equal to the thickness of the item being fastened plus 1-1/4".
Specifications
Ultimate Tensile Strength Values
Anchor | Screw Description | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
SPM Mini | #6 x 1-1/4" | 57 lb. | 65 lb. | 95 lb. |
SP | #8 x 1-1/2" | 57 lb. | 79 lb. | 135 lb. |
Ultimate Shear Strength Values
Anchor | Screw Description | 3/8" Drywall | 1/2" Drywall | 5/8" Drywall |
SPM Mini | #6 x 1-1/4" | 105 lb. | 131 lb. | 175 lb. |
SP | #8 x 1-1/2" | 108 lb. | 149 lb. | 178 lb. |
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
Whats in the Box?
- (50) TOGGLER SnapSkru SP anchors
- (50) #8 x 1-1/2" screws
8. Prest-On 4060 5/8" Prest-on Insta-back Wall Frog Drywall Fastener200 Pack
Feature
Insta-Back (Wal-Frog) fasteners eliminate the need to cut gypsum board back to the nearest stud.Reduce number of joints to be finished. Saves time, eliminates sagging wallboard between trusses.
Insta-back makes removal and reattachment of any size piece of gypsum board quick and easy.
Description
INCLUDES: (200) 5/8" Insta-backFEATURES: Insta-Back (Wal-Frog) fasteners eliminate the need to cut gypsum board back to the nearest stud. Reduce number of joints to be finished. Saves time, eliminates sagging wallboard between trusses. Insta-back makes removal and reattachment of any size piece of gypsum board quick and easy.Insta-backmakes removal and reattachment of any size piece of gypsum board quick and easy. Fasteners attach to existing board to provide a solid back-up surface for reattaching the replacement piece.9. TOGGLER SNAPTOGGLE BB Toggle Anchor, Zinc-Plated Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 100)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BB toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant zinc-plated steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
1/2" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 265 lb. | 241 lb. |
5/8" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 356 lb. | 324 lb. |
1/2" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 425 lb. | Not available |
5/8" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 464 lb. | Not available |
Concrete Block | 1/2" | 1/4"-20 UNC zinc-plated steel | 1,080 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
10. Small / Mini Plastic Self Drilling Drywall Anchors with Screws Kit, 50 Pieces All Together
Feature
Drill Point Pre-drills precise hole in wood, double drywall or Hollow-wall etc. No hole preparation requiredStarts easier than other drywall anchors, drills directly into drywall even if you hit a wood stud
Light duty self drilling plastic anchors
Constructed from durable plastic to last for years. Can be easily removed
Kit Includes: 25 Plastic Anchors, 25 #6 x 1-1/4'' Phillips Screws and a Plastic Case, Hangs up to 30 lbs
Recent Comments