The 10 best flange alignment 2019
Finding the best flange alignment suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best flange alignment
1. Strong Hand, Pipe Pliers with Large V-Pads, 11-Inch - PG114V
Feature
Wide opening allows the Pipe Pliers to hold up to 2-1/2" diameter pipes.Adjustable top spindle for holding pipes of varying sizes.
2 large V-Pads provide a better clamping surface.
0 & 45 angle clip allows angled clamping.
Description
Save time and money with the quick-acting Strong Hand line of Clamps, Magnets, and Pliers. Each innovative Strong Hand Clamp is specifically designed to be quick-acting, so you save valuable work set-up time. Built with heat-treated steel and nickel/chrome plating for strength and durability. Pieces (qty.): 1, Product Style: Locking clamp, Length (in.): 11, Opening (in.): 1 1/5-2 1/2, Finish Type: Chrome, Material: Steel/nickel, Throat Depth (in.): 3 1/22. Strong Hand Tools, Pipe Alignment Clamp, with Quick Acting Screws, CPA60
Feature
The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site.Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.
The long life clamp is made of double-walled powder coated steel. Align pipe for joining pipe to elbow, pipe to tee, or pipe to flange.
Capacity: 2 ~ 6 (50 ~ 152 mm)
Description
The New Pipe Alignment Clamp with Quick-Acting Screw is a fast, accurate fit-up clamp with a rugged frame for use in the shop, or at the job site. Get a well-balanced hold on the Pipe Alignment Clamp with the two wide Grip Plates while pressing the Quick-Acting Button. The threaded screw smoothly glides up and down for fast jaw opening and clamp removal after welding.3. Enerpac ATM2 Flange Alignment Tool, 1.0 Tons, Yellow
Feature
Enerpac ATM-Series tools rectify twists and rotational flange misalignment quickly, safely, and without the need for an external power sourceAppropriate for use on most ANSI, API, BS and DIN flanges
No slings, hooks or lifting gear required
Can be installed and used in any position (horizontally or vertically)
ATM-2 and ATM-4 Mechanical flange alignment tools are light-weight, self-contained solutions, which can be easily transported and used in remote locations, with limited access
Description
The ATM-series tools introduce a faster, simpler and safer way to align flanges. The extendable wing provides usage on wide variety of flanges. the tools are portable, and their lightweight design enables easy transport and use. The safety strap helps provide secure operation from a horizontal or vertical position. Each ATM solution contains a tool and a kit box.4. Strong Hand Tools, Pipe Fit-Up Clamp, Pipe Welding Alignment Tools (Pipe Diameter Capacity: 2 ~ 4 (50~100 mm))
Feature
Pipe Welding Alignment ToolsA compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding.
Easy-to-Use design for the rapid, repeated loading and unloading of workpieces.
Description
A compact, light weight, portable clamp for the quick fit-up of round pipes and flanges for butt welding. Easy-to-Use design for the rapid, repeated loading and unloading of workpieces.5. 2 Pieces- UCFL204-12 3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, Brand New
Feature
Brand NewFree Shipping within the Continental United States
Same business day order processing before 12:30PM PDT
Satisfaction Guaranteed
Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4" Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F
Description
UCFL204-12 Pillow Block Flange Bearing 3/4" Bore 2 Bolt Solid Base (2PCS)-Brand New
-Free Shipping within the Continental United States
-Same business day order processing before 12:30PM PDT
-Satisfaction Guaranteed
Bore Size: 3/4 Inch
Static Load Rating: 6.65 kN/1500 lbs
Dynamic Load Rating: 12.8 kN/2900 lbs
Material: Cast Iron
Max RPM: 4000
Quantity Per Order: 2 Pieces
Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.
Style: 2 Bolts
Product Description: The UCFL pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.
6. 10 Pieces- UCFL204-12 3/4 inch 2 Bolt Pillow Block Flange Bearing, Self-Alignment, Brand New
Feature
Brand NewFree Shipping within the Continental United States
Same business day order processing before 12:30PM PDT
Satisfaction Guaranteed
Dimensions: Item: UCFL204-12 Bearing Type: Mounted Bearings Bolt Size: M10 Basic Load (Cr): 12.8 KN Basic Load (Cor): 6.65 KN Bearing No: UC204-12 Bore: 3/4" Bolt hole to bolt hole: 3.543 in. (90mm) Overall length: 4.448 in. (113mm) Overall thickness: 1.312 in. (33.12mm) Bolt hole: 452 in. (11.5mm) Temp. Range: -40 Degrees to 250 Degrees F
Description
UCFL204-12 Pillow Block Flange Bearing 3/4" Bore 2 Bolt Solid Base (10PCS)-Brand New
-Free Shipping within the Continental United States
-Same business day order processing before 12:30PM PDT
-Satisfaction Guaranteed
Bore Size: 3/4 Inch
Static Load Rating: 6.65 kN/1500 lbs
Dynamic Load Rating: 12.8 kN/2900 lbs
Material: Cast Iron
Max RPM: 4000
Quantity Per Order: 2 Pieces
Self Alignment Feature: If the bearing is crooked please don't worry. This is our self-alignment feature. These bearing are meant to have some play in them. When you mount them, just use the shaft to rotate the bearing into proper position, or if it is not out of alignment by much, the bearing will correct its own alignment once it begins to rotate. If the bearings were not aligned properly and spinning at high RPMs then sure disaster would happen. Our self-alignment feature is a way to prevent this from happening.
Style: 2 Bolts
Product Description: The UCFL pillow block mounted bearing series has two bolt holes, and a set screw lock is designed for mounting onto bearing surfaces parallel to the shaft axis, such as conveyor belts. This ready-to-mount unit has solid base cast iron housing, chrome steel bearings, and is designed for efficient operation at a wide range of speeds. This one-piece pillow block housing allows for a stationary outer ring and rotating inner ring. Insert bearing maintains the separation between moving parts to reduce rotational friction, and to support radial and axial loads. The bearing is secured to the shaft with set screws to prevent slippage. This mounted bearing is used in food and beverage manufacturing, textile industry and many other industrial manufacturing.
7. Sumner Manufacturing 781520 Ultra Qwik Clamp, 2" to 6", Steel/Stainless Steel
Feature
Rugged frame, built for job site useSmooth roller clamping action for positive gripping
Stainless steel contacts & alignment screws
Operating handle repositions for close work
Fine adjustment screws for quick fit-up
Description
The Ultra Qwik Clamp push button design allows for rapid action setting and fine tune threaded adjustment.8. Titan Flange Alignment Pin Set with Case, Contains 2 Units of pin Sizes 3/4", 7/8", 1", 1-1/8", 1-1/4"
Feature
Titan flange alignment pins from SMP are safe, fast, and effective.The Titan flange alignment pin's tapered shaft is a patented feature that eliminates the need for hammering and prying when lining up flange bolt holes.
Titan flange alignment pins eliminate the need for hammering drift pins or fighting with spud wrenches.
Titan flange alignment pins are the only flange alignment pins on the market that compensate for up and down, as well as rotational misalignment.
The simplicity of the Titan flange alignment pins make them the most affordable flange alignment solution on the market.
Description
Titan flange alignment pins from SMP are safe, fast, and effective. The Titan flange alignment pin's tapered shaft is a patented feature that eliminates the need for hammering and prying when lining up flange bolt holes. Titan flange alignment pins eliminate the need for hammering drift pins or fighting with spud wrenches. Find the best bolt hole to insert 1 bolt-hole specific pin, turn 180 degrees, then insert the second bolt-hole specific pin and turn it 180 degrees to line up any size and series of flange. To remove Titan Flange Alignment Pins, simply rotate each pin another 180 degrees. At that point you should be able to remove each pins easily by hand. Titan flange aligning pins are sold both individually and in sets. The SMP-FTS212 and SMP-FTS1426 sets come in a custom-made, foam-lined kit. Titan flange alignment pins are also available in extra-long "L" versions for situations with a blind in between companion flanges. The Titan flange alignment pin SMP-FTS212 set is also available in an SMP-FTS212L kit. Titan flange alignment pin sizes range from 3/8" bolt-hole diameter to 3-5/8" bolt-hole diameter, in regular and extra-long lengths. Titan flange alignment pins are made from 4140 heat treated steel and are then Cadmium plated to provide superior strength and non-sparking capability. Titan flange alignment pins from SMP are the fastest and easiest way to line up bolt holes on companion flanges. Titan flange alignment pins are the only flange alignment pins on the market that compensate for up and down, as well as rotational misalignment. The simplicity of the Titan flange alignment pins make them the most affordable flange alignment solution on the market. Titan flange alignment pins are another example of SMP's dedication to bringing safer and more efficient maintenance tools to the industrial market.9. Two (2) B&B Pipe 2120 Flange Alignment Pins for 1/2" to 1-1/2" Holes
Feature
Fits 1/2-inch to 1-1/2-inch holes for maximum versatility.For use in flange holes up to 1-1/2-inches deep.
Made from carbon steel with a durable zinc-coated finish for a long operating life.
Knurled handles increase grip and tightening ability.
Quick release design for fast flange alignment.
Description
Two (2) B&B Pipe 2120 Flange Alignment Pins for 1/2" to 1-1/2" Holes
Set of two (2) B&B Pipe 2120 Flange Alignment Pins. These pins will fit 1/2-inch to 1-1/2-inch holes. Pins are used for quick release and adjustment of pipe jack stands and feature a built-in level.
- Versatile pins fit 1/2-inch to 1-1/2-inch flange holes that can be up to 1-1/2-inches deep.
- Made from carbon steel with a durable zinc-coated finish for extended working life.
- Knurled handles will increase grip and tightening ability.
- Quick release design for fast and easy flange alignment.
- Built-in level allows operator to level work piece quickly and easily.
10. Titan "Extra long" Flange Alignment Pin for 3/4" Bolt Hole, 6-1/4" Length
Feature
Titan flange alignment pins from SMP are safe, fast, and effective.The Titan flange alignment pin's tapered shaft is a patented feature that eliminates the need for hammering and prying when lining up flange bolt holes.
Titan flange alignment pins eliminate the need for hammering drift pins or fighting with spud wrenches.
Titan flange alignment pins are the only flange alignment pins on the market that compensate for up and down, as well as rotational misalignment.
The simplicity of the Titan flange alignment pins make them the most affordable flange alignment solution on the market.
Recent Comments