The 8 best gates a33 for 2019

This Gates Hi-Power II belt is a multipurpose power transmission V-belt for widespread applications. It is made of EPDM (ethylene propylene diene monomer) rubber for resistance to weathering, oils, water, and some solvents. Its cords are bonded to the body are strongly bonded to the body of the belt for equal load distribution and reducing bending stress without deterioration of the cord. Its concave sidewalls provide cord support and full contact with the sheave groove for equal loading and uniform wear. Hi-Power II belts are part of Gates' V80 matching system, which guarantees that all belts of the same type and size will be more precisely matched than the Rubber Manufacturers Association (RMA) and International Standards Organization (ISO) standards require. The result is even load distribution on multi-belt drives and better wear. This V-belt meets RMA oil and heat resistance standards and static conductivity requirements and is suitable for use in all industrial applications, including V-flat drives.

V-belts, also calledfan belts in automotive applications, link two or more rotating shafts to transmit power in a drive system. The trapezoidal shape of the belt's cross section wedges into the groove of a similarly shaped sheave or pulley to provide traction and alignment. This wedging action increases as the load increases, providing higher torque transmission and minimal slippage. V-belts are standard for belt-driven power transmission and can be used in single- or multi-belt systems for increased carrying power. They are found in drive systems in the automotive, agricultural, textile, printing, mining, and office equipment industries, among others.

Gates manufactures power transmission and fluid transfer components and systems. The company, founded in 1917, is headquartered in Denver, CO.

This Challenge A33 classical A profile V-belt has a top width of 13mm (0.512"), a pitch width of 11mm (0.433"), a section height of 8mm (0.315"), an outside length of 890mm (35.04"), an inside length of 840mm (33.07"), and a pitch length of 870mm (34.25"). It's made of rubber reinforced with polyester cords to minimize stretching and increase tensile strength, and is resistant to heat, oil, and static, making it suitable for rugged operating environments. It has a working temperature range of -22 to +158 degrees F (-30 to +70 degrees C), and complies with International Organization for Standardization (ISO) 4184 for datum lengths; ISO 1813 for anti-static properties; and British Standards (BS) 3790, Deutsches Institut fr Normung (DIN) 2215, and Association for Rubber Products Manufacturers (ARPM) IP-20 for quality assurance. This Challenge A33 classical A profile V-belt is suitable for use in a variety of commercial and industrial applications, such as conveyor systems, manufacturing, mining and construction equipment, and agricultural and automotive power transmission, among others.

Traditional classical belts are designed for operating at higher speeds over small diameter pulleys and short-center distances. They can be used in multiple V-belt drives and are used frequently in abusive environments such as farming and manufacturing. They are constructed to withstand the heat of the outdoors and oily, dirt-filled manufacturing environments.

The Challenge Group manufacturers power transmission components, including chains, sprockets, belts, pulleys, shaft couplings, and bearings. The company, headquartered in Wolverhampton, England, meets International Organization for Standardization (ISO) standard 9001.