The 9 best miter saw universal stand
Finding your suitable miter saw universal stand is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best miter saw universal stand including detail information and customer reviews. Let’s find out which is your favorite one.
Best miter saw universal stand
1. POWERTEC MT4000 Deluxe Portable Miter Saw Stand with Wheels
Feature
Innovative mobile saw stand, constructed with round steel tubingSupports up to 330lbs. 8-Inch rubber wheels for easy transport
Accommodates most 10" and 12" miter saws. Support arms extend to 79-1/4-Inch, retract to 46-Inch
Spring-loaded locking legs for easy set-up and break down. Universal quick-release mounting brackets included
Two 11-1/2" steel rollers insure a smooth feed
Description
The POWERTEC MT4000 Deluxe Miter Saw Stand with Wheels and 110V Power Outlet is the ultimate portable saw workstation. The stand is constructed with steel tubing and locking steel legs which provides a weight capacity up to 330 lbs. Miter saws, and other bench top saws and planers can be easily secured and removed with quick-dash release universal mounts. Two adjustable steel rollers support your work piece along the stand length smoothly and accurately. Useful flip- down supports for lumber or material storage offer easy accessibility to work materials. The stand also includes a convenient 3-outlet power strip which makes being near an electric outlet unnecessary. For stability, the leveling feet are adjustable for uneven surfaces. For ease of mobility, this stand comes with two 8-inch rubber wheels; just roll the stand to your preferred location (and work away). Height: 32-1/4" (819 mm); Extended Width: 79-1/4" (2013 mm): Maximum Load Capacity: 330 lbs. (150 kg); Outlet Input Voltage: 125V AC; Input Ampere: 15 Amps; Net Weight: 40 lbs. (18 kg); Gross Weight: 42 lbs. (19 kg).2. WEN MSA330 Collapsible Rolling Miter Saw Stand with 3 Onboard Outlets
Feature
Universal design fits nearly every miter saw on the market, including all WEN miter sawsCollapsible rolling stand features two 8-inch never-flat wheels for simple transportation and storage
Sturdy 1-1/2-inch diameter steel frame elevates your miter saw 33 inches off the ground
Extend the support arms anywhere from 32 to 79 inches to support boards up to 10.5 feet long
Includes three onboard 15A 120V outlets, two height adjustable rollers, quick-release brackets, two table extensions, a powder-coated finish and a two-year warranty
Description
Remember when you could adequately support both your miter saw and your workpiece? With the WEN Collapsible Rolling Miter Saw Stand, youll have a sturdy and reliable support system for all your sawing needs. Three pre-mounted 120V outlets provide you up to 15 amps of power, meeting the needs of saws and tools of all sizes. Two 8-inch never flat wheels combine with foldable design for a safe and easy transportation and storage solution. The sliding arms extend anywhere from 32 to 79 inches in width, providing support for boards up to 10.5 feet long. Quick-release brackets tightly lock the miter saw in place for simple installation and adjustments. The 1-1/2-inch-diameter steel frame provides over 330 pounds of support to your saw and materials while the powder-coated finish prevents corrosion and marring to the stands body. Adjust the height of the detachable rollers to best match the specific requirements of your project. Both rollers also operate as work stops, helping make consistent and even cuts every time. The universal design allows for compatibility with the majority of miter saws on the market, including the entire WEN miter saw series. If you want to know whether or not your particular miter saw will fit onto the WEN Rolling Miter Saw Stand, simply measure the distance between the front and back mounting holes. If this distance is less than 15 inches and on a centerline, the stand will fit. And because its a WEN product, your miter saw stand comes backed by a two year warranty, a nationwide network of skilled service technicians and a friendly customer help line all to make sure you remember WEN.3. Hitachi UU240R Heavy Duty Fold & Roll Universal Miter Saw Stand
Feature
Single action set-up and take-down for quick and efficient useHeavy-duty tubular steel construction can support up to 300 lbs
Material support extensions (extend 8') for supporting longer material
Accepts up to a 12" sliding compound miter saw for ultimate flexibility
Weighs only 63 lbs. for easy transport and storage
Large 8" rubber treaded wheels make it easy to transport over rugged jobsite terrain even while the saw is mounted
Height adjustment knobs for material supports allow for quick and easy set-up
Includes Anchor Plates and Auxiliary Mounting Brackets
Description
Hitachis fold & roll miter saw stand combines efficient single action set-up and take-down with convenient portability and storage. Constructed of durable tubular steel that provides plenty of strength for demanding workloads, the stand accepts Hitachi sliding miter saws with blades up to 12 inches in diameter. Quick-release mounting brackets allow saws to be removed easily for use off the stand while auxiliary mounting brackets make the stand fully Universal and eliminate the need for creating an additional mounting surface. Adjustable material supports extend up to 96 inches to accommodate longer material and its adjustable stops help with repeated cutting applications. Large rubber treaded wheels make the fold & roll miter stand readily transportable over even the most rugged jobsite terrain.4. PROTOCOL Equipment Contractor Miter Saw Workstation, Universal Mount, Durable Steel Construction, Foldable Legs for Portability, Adjustable Width, Supports 500 lbs.
Feature
PORTABLE WORKSTATION - Portable wheeled workstation with adjustable tool mount brackets and extendable material supportsPROFESSIONAL GRADE STRENGTH - Made of high-grade steel that can support up to 500lb of materials so you can tackle big jobs faster
UNIVERSAL MOUNT - Adjustable tool mount brackets have six inch handles and work with most brands of miter saws
2 MATERIAL SUPPORTS - 2 adjustable material supports each feature an end stop to make quick work of repeat cuts
FOLDING LEGS - Folding legs have quick-release levers for easy setup and take-down and on one side feature fold-down material storage brackets
ADJUSTABLE TOP WIDTH - Infeed and outfeed material supports adjust from a compact 35-inches to a maximum of 77-inches
CAPPED FEET - Capped feet on each support leg allow use on finished surfaces without damaging them
Description
Youre all about earning sweat equity, but to be efficient on the job, you need equipment that will work as hard as you. Good thing the PROTOCOL Equipment WS-077 Contractor Miter Saw Workstation always outperforms its competitors. Constructed of high-grade and corrosion-resistant, powder-coated steel, this stand has a 500 pound weight capacity and the adjustable tool mount brackets work with most brands of miter saws and other bench-top tools. The tool mounts have a sliding rail that lets you adjust the center of gravity of any mounted tool and create a steady foundation while cutting. The tubular, powder-coated steel legs are capped for use on finished surfaces and have quick-release levers for easy setup and take-down. One pair of legs feature fold-down storage brackets that can hold a variety of builder materials. The top width adjusts from 35-inches to 77-inches, allowing for an extensive workload. There's a convenient carrying handle and sturdy wheels that make transporting this workstation effortless.PROTOCOL tools are designed to exceed the requirements of entry-level pro contractors and DIY customers shopping in select retailers.
5. General International MS3102 Miter Saw Stand, Red, Black & Gray
Feature
Lightweight tubular steel frameUniversal mounting adaptors fit most saws
Lever-actuated quick-release saw mounting system for easy saw removal and replacement
Stands at 79-inches when extended and 46-Inches when retracted
8-inch Wheeled for convenient transport
Description
The General International power products MS3102 Miter saw stand features a tubular steel frame with large 1.5-Inch diameter legs and dual Crossbars. The Universal mounting adapters are designed to fit most saws. The height adjustable support extensions are equipped with handy material cutting stops and rollers. Designed to roll out, set up in seconds and transform any garage or driveway into a practical workshop. The rugged, lightweight, contractor grade MS3102 Miter saw stand is loaded with features that will make the job easier for you. This saw will make working easy and jobs go by faster so you can get more done in a shorter amount of time. Ergonomically designed, the general Miter saw stand has a 35-Inch work height to reduce back strain. Since 1946, general has proudly produced innovative powered tools focused on value delivering meaningful features that will help you complete and enjoy the work as much as the project. Includes 2 year limited warranty.6. Ridgid AC9946 Mobile Miter Saw Stand with Mounting Braces
Feature
Place and secure your miter saw on this stand and utility vehicle for convenient work surface and transportLarge 12-inch wheels make moving your stand and saw easy, even over stairs
Universal mounting brackets with tool-free adjustment makes this stand compatible with most common miter saws
Can support up to 300 pounds
Includes: miter saw utility vehicle, transport wheels, work supports, transport handles, universal saw mounting brackets, and hardware
Description
Your miter saw needs more than a display case, it needs a way to move with you and your projects. This certified refurbished Ridgid Mobile Miter Saw Stand and Utility Vehicle is for those who don't need just a miter saw stand but also a utility vehicle. Built to make your life easier, this saw stand comes with sturdy, 12-inch wheels so you can get your saw where it needs to go, even if that means traversing stairs. When you get to your work space, it sets up easy with its single-step release. You can use your favorite miter saw thanks to its universal mounting brackets which allow it to be compatible with most common miter saws. It also features tool-free extension lock levers for quick and secure adjustments. Once everything's set up, this stand can extend to up to 9.5 feet and support up to 300 pounds. There's no need to sit around and look pretty, get rolling with the Ridgid Mobile Miter Saw Stand.7. Ryobi 300 lbs. Capacity Universal Miter Saw Stand
Feature
Accommodates most miter sawsAdjustable arm extends for added convenience
Tool-less height adjustment of material supports
Quick-release mounting brackets help you easily mount and remove your miter saw from the stand
Holds up to 300 lbs.
Description
Includes 300 lbs. Capacity Universal Miter Saw Stand - ZRRMS10-G8. REDLEG 65313 Universal Miter Saw Stand
Feature
UNIVERSAL SAW STAND - Mounting rails are compatible with most brands of miter sawsHEAVY-DUTY CONSTRUCTION - Heavy duty steel body and legs can support up to 400 pounds of material
EXTENDABLE LENGTH - Material supports extend out to 60-inches to support a wide range of materials
SECURE FOLDING - Leg lock secures stand in folded position for easy storage and portability
CLAMPING TOOL MOUNTS - Rapid clamp tool mount brackets allow quick removal and mounting of miter saws
ADJUSTABLE MATERIAL SUPPORTS - Adjustable height material supports with end stops make repeat cuts quick and easy
1-YEAR WARRANTY - Comes with a 1-year limited warranty
Description
The REDLEG 65313 Universal Miter Saw Stand is a heavy-duty yet easily portable stand that can easily handle the toughest jobs any contractor could throw at it. The durable steel body and legs can support up to 400 pounds of material. The end-mounted extendable material supports extend up to 60-inches to easily handle oversized work pieces and the material end-stops make quick work of repeat cuts. Rapid adjustable clamping tool mount brackets allow you to quickly attach and remove your miter saw during setup and takedown. When finished the legs fold up and are secured with a steel leg lock that keeps them stowed away for easy storage and the under-mounted carrying handle makes transporting the stand from jobsite to jobsite or to and from the workshop or garage easy.9. Folding Miter Saw Stand with Wheels Portamate PM-7500. Portable Power Tool Stand with Wheels, LED Light, Quick Tool Mounts and 4 Outlet 110V Power Strip.
Feature
Exceptional portable Miter Saw / Power Tool stand.6" wheels and foldable legs make for easy storage and transport.
Built tough, with rust-resistant powder coated steel finish, and a maximum weight capacity of 500 pounds. Yet extremely lightweight as well (50 lbs. total).
Four-outlet 110V power strip turns it into a true work center.
Universal quick mounts for miter saws, planers, band saws, and most other bench top tools. Extra mounts (PM-7002) can be purchased.
Recent Comments