Thing need consider when find dc motor raspberry pi?
When you looking for dc motor raspberry pi, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable dc motor raspberry pi is not an easy task. In this post, we show you how to find the right dc motor raspberry pi along with our top-rated reviews. Please check out our suggestions to find the best dc motor raspberry pi for you.
Best dc motor raspberry pi
1. Adafruit DC & Stepper Motor HAT for Raspberry Pi - Mini Kit
Feature
4 H-Bridges: TB6612 chipset provides 1.2A per bridge with thermal shutdown protection, internal kickback protection diodes. Can run motors on 4.5VDC to 13.5VDCUp to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
Big terminal block connectors to easily hook up wires (18-26AWG) and power
Works best with Raspberry Pi model A+, B+, or Pi 2, but can be used with a model A or B if you purchase a 2x13 extra-tall header and solder that instead of the 2x20
Description
Let your robotic dreams come true with the new DC+Stepper Motor HAT from Adafruit. This Raspberry Pi add-on is perfect for any motion project as it can drive up to 4 DC or 2 Stepper motors with full PWM speed control.Since the Raspberry Pi does not have a lot of PWM pins, we use a fully-dedicated PWM driver chip onboard to both control motor direction and speed. This chip handles all the motor and speed controls over I2C. Only two pins (SDA & SCL) are required to drive the multiple motors, and since it's I2C you can also connect any other I2C devices or HATs to the same pins.
In fact, you can even stack multiple Motor HATs, up to 32 of them, for controlling up to 64 stepper motors or 128 DC motors (or a mix of the two) - just remember to purchase and solder in a stacking header instead of the one we include.
Motors are controlled by TB6612 MOSFET drivers with 1.2A per channel current capability (you can draw up to 3A peak for approx 20ms at a time), a big improvement over L293D drivers and there are built-in flyback diodes as well.
We even had a little space so we added a polarity protection FET on the power pins and a bit of prototyping area. And the HAT is assembled and tested here at Adafruit so all you have to do is solder on the included 2x20 plain header and the terminal blocks.
Install the easy-to-use Python library, check out the examples and you're ready to go!
Comes with an assembled & tested HAT, terminal blocks, and 2x20 plain header. Some soldering is required to assemble the headers on
2. TIMESETL 5pcs DC 5V Stepper Motor 28BYJ-48 + 5pcs ULN2003 Driver Board + 40pcs Male Female Jumper Wire Cable for Arduino Raspberry PI
Feature
[Standard Interface] This stepper motor comes with standard interface, direct plug and easy to use[4 Phase] A, B, C, D four-phase LED indicates the status of the stepper motor work
[5 Lines] Use with ordinary ULN2003 chip driver(Included), connect to the 2 phase, support the development board, direct docking
[Size] DC 5v step motor diameter 1.1 inch, cord length 9.5 inch, reduction ratio 1/64, step angle 5.625 x 1/64; driver board size 1.4 x 1.3 x 0.4 inch
[40Pcs F-M Jumper Wire] Multicolor dupont wire female to male, 2.54mm 1 pin to 1pin, 8 inch(20cm) length
Description
Geared Stepper Motor of TIMESETLTIMESETL Arduino Motors - High Quality
Specification:
Stepper motor
Diameter: 1.1 inch (28mm)
Voltage: DC 5V
Length: 9.5 inch (23.9cm)
Step Angle: 5.625 * 1/64
Reduction ratio: 1/64
DC Resistance: 2007% (25)
Insulation Resistance: >10M (500V)
Dielectric Strength: 600V AC / 1mA / 1s
Insulation Grade: A
No-load Pull in Frequency: >600Hz
No-load Pull out Frequency: >1000Hz
Pull in Torque: >34.3mN.m(120Hz)
Detent Torque: >34.3mN.m
Temperature Rise: <40K(120Hz)
Noise: <40dB (120Hz, No load, 10cm)
Uln2003 driver test module: size 1.4 x 1.3 x 0.4 inch (3.5*3.2*1 cm)
Hole diameter: 3mm
Jumper wires male to female: 20cm/8inch length
TIMESETL Arduino Stepper Motor - Easy To Use
The stepper motor is a standard 4 phase design and is very easy to use.
Comes with an easy to use 5 pin connector attached to the end, keyed to ensure you do not connect it to the motor driver board backwards.
There is an LED for each output pin - this makes it easy to see which phases are currently active.
This stepper motor is bi-directional - you can run it clockwise or anti-clockwise.
To run the motor clockwise, you should activate the phases in this order:
Phase D
Phase D and Phase C
Phase C
Phase C and Phase B
Phase B
Phase B and Phase A
Phase A
Phase A and Phase D
And repeat...
To run the motor anti-clockwise, you should activate the phases in this order:
Phase A
Phase A and Phase B
Phase B
Phase B and Phase C
Phase C
Phase C and Phase D
Phase D
Phase D and Phase A
And repeat...
Delivery
5pcs x Driver Board
5pcs x Stepper Motor
40pin x Female Male Dupont Wire
3. Adeept New Ultimate Starter Learning Kit for Raspberry Pi 3 2 Model B/B+ Python ADXL345 GPIO Cable DC Motor
Feature
Fast free shipping with a tracking number.A detailed user manual/guidebook(PDF) with 26 lessons and two version code(Python and C) are provided, it is esay for you to learn Raspberry Pi and C&&Python programming. There is a CD ROM or a USB flash drive in the product box, all the files were pre-stored in the CD ROM or USB flash drive inside, or you can send an email to us with title "require files for RPi Ultimate kit" to obtain all the files(PDF guidebook, C && Python code, circuit diagram, datasheets, etc.)
Quick-responding technical support for free.
Pretty project box, and it is a wonderful gift for children.
Raspberry Pi is NOT included
Description
This is a Ultimate Starter Leaning Kit for Raspberry Pi and it is a more comprehensive kit than our other Raspberry Pi Kits, this kit contains more than 50 kinds of different electronic components, more than 180 components are included. With this kit, we will take you from knowing to utilizing, you are able to do more experiment, get your more idea into real action without the restriction of hardware and software, and we have carefully prepared a guide book(PDF) and supporting experimental code routine for you, including a total of 26 experiments.If you want to learn the basics of electronics and Linux programming, this kit is a wonderful choice for you. We believe that with this hardware + software support, you are able to become expert programmer(developer) very soon. So don't wast time, just get this kit, and start your project right away !
Lessons:
About the Raspberry Pi
Raspberry Pi Pin Numbering Introduction
Raspberry Pi GPIO Library Introduction
How to use the wiringPi and the RPi.GPIO
1 Blinking LED
2 Active Buzzer
3 Passive Buzzer
4 Controlling an LED with a button
5 Relay
6 LED Flowing Lights
7 Breathing LED
8 Controlling a RGB LED with PWM
9 7-segment display
10 4-digit 7-segment display
11 LCD1602
12 A Simple Voltmeter
13 Matrix Keyboard
14 Measure the distance
15 Temperature & Humidity Sensor-DHT-11
16 Dot-matrix display
17 Photoresistor
18 Thermistor
19 LED Bar Graph
20 Controlling an LED through LAN
21 Movement Detection Based on PIR
22 DC Motor
23 How to control a servo
24 How to control a stepper motor
25 How to use the acceleration sensor ADXL345
26 PS2 Joystick
4. Raspberry Pi 3 B+/3B Full Function Motor HAT, Robot Expansion Board Support Raspberry Pi 3 Molde B+, B Plus/3B/2B/B+ (Stepper/Motor/Servo/IR Remote)
Feature
DIY Your Robot! Stepper Motor/Servo/Motor/Sensors/IR Romote Full function Motor HAT Robot Expansion Board for Raspberry Pi 3 B+ / 3B / 2B / B+ / Zero.4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 5VDC to 12VDC.
Up to 4 bi-directional DC motors with individual 8-bit speed selection; Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping; Up to 4 Channel 12-bit PWM/Servo(5V).
One Infrared Receiver(GPIO26) with Big terminal block connectors to easily hook up wires (18-26AWG) and power, Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power.
[Video & Documentation] Please refer to the detail on the page.
Description
[Function]4 H-Bridges:provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 5VDC to 12VDC.
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
Up to 4 Channel 12-bit PWM/Servo(5V)
OneInfrared Receiver(GPIO26)
Big terminal block connectors to easily hook up wires (18-26AWG) and power
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
Works best with Raspberry Pi 3 model B+/ Raspberry Pi 3 B / Pi 2 / B / A+;
[Features]
4 H-Bridges: TB6612 chipset provides 1.2A per bridge (3A peak) with thermal shutdown protection, internal kickback protection diodes. Can run motors on 5VDC to 12VDC.
Up to 4 bi-directional DC motors with individual 8-bit speed selection (so, about 0.5% resolution)
Up to 2 stepper motors (unipolar or bipolar) with single coil, double coil, interleaved or micro-stepping.
Up to 4 Channel 12-bit PWM/Servo(5V)
One Infrared Receiver(GPIO26)
Big terminal block connectors to easily hook up wires (18-26AWG) and power
Polarity protected 2-pin terminal block and jumper to connect external 5-12VDC power
Works best with Raspberry Pi model A+, B+, Pi 2, Pi 3, New raspberry Pi 3 Model B+;
Install the easy-to-use Python library, check out the examples and you're ready to go!
Pi HAT 2x20P Conector with Extra Long pin
[Packing List]
1 x Robot Motor HAT Expansion Board
[Video]
youtu.be/lUQ9d245ZK4
youtu.be/GvSKLs977gI
youtu.be/Sdk6P-6Sh-I
[For more details]
Please refer to our wiki: http://www.raspberrypiwiki.com/index.php/Stepper/Motor/Servo_Robot_Expansion_Board_SKU:418460
5. SB New Motorshield for Raspberry Pi 3,2,1 and Zero This Expansion Board can Control up to 4 Motors or 2 Stepper Motor, 2 IR sensors and a Single ultrasonic Sensor.
Feature
Dual H-Bridge IC L293D. Motor Input Supply Range: 6V - 24VSingle Motor Output Current: 600mA or 1A peak per channel
On board Arrow Indicator for motor direction Indication,
2 IR sensor connectors with 3.3V level output protection. Control 2 stepper motor
1 Ultrasonic sensor connector with 3.3V level output protection. Download code from https://github.com/sbcshop/motor-shield
Description
The new Motorshield for the Raspberry Pi Designed to help you get your Raspberry Pi mobile as part of your robot project this board lets you control up to 4 DC motors or 2 stepper motor. It includes direction indicator LEDs to help you configure your motor output and connectors designed for plugging in IR and ultrasonic sensor modules to tell your robot about its environment. This makes it a perfect component for object detection/avoidance, wall-following or light-following robots. The board is designed specifically for the Raspberry Pi 2/3 Model B. Based around the L293D IC it is capable of driving 4 DC motors or 2 stepper motors. The L293D is a dual full bridge driver that can output up to 1Amp per bridge with supply voltage up to 24V.6. SunFounder TB6612 1.2A DC Motor Driver Module for Arduino or Raspberry Pi Smart Car Robot
Feature
Uses the TB6612FNG motor driver chip with a maximum output current of 1.2A.Firm and convenient wiring, with anti-reverse port for both motor connection and signal input.
Simple control: control two motors simultaneously - MA and MB for direction of the motor, and PWMA and PWMB for rotational speed.
Dual power supply. VCC for the module: 2.7-5.5 V, VM for the motor: 15V (Max).
Small and lightweight, with 3mm mounting holes, suitable for smart cars.
Description
IntroductionThe TB6612 Motor Driver Module uses TB6612FNG as the driver chip which has large current (1.2A continuous current) and two-channel output in a MOSFET-H bridge structure, and can drive two motors. The motor voltage and the working voltage of the module are separated - VCC for the module: 2.7 V to 5.5 V, and VM for the motor: 15V (Max). But the optimum working voltage of the motor is 4.5V-13.5, and it cannot work when the voltage is lower than 4.5V.
It's easy to control since you can control the forward and reverse rotation of the two servos by setting the values MA and MB as high or low level. The values PWMA and PWMB are to control the rotational speed of the motor which only occupy 4 I/O pins. The anti-reverse ports for motor connection and signal input can be plugged firmly and conveniently. With low-voltage detection and thermal shutdown inside the chip to protect the circuit, you don't need to worry about ruining your project or damaging the main control board.
For more information, please refer to http://wiki.sunfounder.cc/index.php?title=TB6612_DC_Motor_Driver_Module
Component List
1 * SunFounder TB66112 Motor Driver
3 * 2-Pin Anti-reverse cable
1 * 4-Pin Anti-reverse cable
7. Motor Driver HAT for Raspberry Pi Onboard PCA9685 TB6612FNG Drive Two DC Motors I2C Interface 5V 3A
Feature
The Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robotsRaspberry Pi connectivity, compatible with Raspberry Pi Zero/Zero W/Zero WH/2B/3B/3B+, I2C controlled, by setting 5 address jumpers, it is stackable up to 32 this modules
Onboard PCA9685 chip, provides 12-bit hardware PWM to adjust motor speed; Onboard TB6612FNG dual H-bridge motor driver, high efficiency, low heating
Integrates 5V regulator, up to 3A output current, can be powered from battery through VIN terminal; Power supply: 6V~12V (VIN terminal); Logic voltage: 3.3V
Reserved I2C control pins, allows to work with other control boards; 65mm x 30mm dimension, 3.0mm mounting hole size
Description
OverviewThe Motor Driver HAT is designed for Raspberry Pi, controlled via I2C interface, will drive two DC motors at the same time. It's an ideal choice for you to DIY mobile robots.
Features
Specifications
Package Contains
Note: Raspberry Pi in the photos is NOT included.
Motor Driver HAT x1
RPi screws pack (2pcs) x1
Development Resources
Wiki: www.waveshare.com/wiki/Motor_Driver_HAT
100% original,offer technical support!
8. SunFounder Raspberry Pi 3 Model B+ Starter Kit for Raspberry Pi Including GPIO Breakout Board Breadboard LCD DC Motor LED RGB Dot Matrix Manual User Guide, TFT Card and Raspberry Pi 3B+ Included
Feature
STEM EDUCATION KIT - Perfect choice for beginners to learn Raspberry Pi, electronics and program.STRONG COMPATIBILY - This kit is compatible with all 40-Pin Raspberry Pi LEARN TO PROGRAMMING - Python code and C code are provided for beginner learn to programming.
LEARN TO PROGRAMMING - Python code and C code are provided for beginner learn to programming.
14 PROJECTS PROVIDED - This starter kit provides a record 14 projects with diverse functions allowing for a dynamic creative experience.
STYLISH PACKAGING - A cool-blue plastic packaging box is included for easy and neat storage.
Description
SunFounder Super Kit is a learning device for the Raspberry Pi including various of sensor modules and Dragit software, that will make learning and mastering codes a fun experience.DESCRIPTION
This super kit is suitable for the Raspberry Pi B, model B+, Pi 2 model B, Pi 3 model B and Pi 3 model B+, suitable for beginners and anyone who enjoys programming toys. It comes with the easy-to-use visual programming language software Dragit, making coding fun and easy to learn. The sensor modules formulate 14 lessons which present you various functions and interesting projects. You can make it happen by following the experiment instructions, and learn basic knowledge about them. Also you can explore more application after mastering the principle and code.
Aboutthevisualprogramminglanguagetutorial,pleasereferto the item page and download the User Manual
SPECIFICATIONS
PACKAGE INCLUDES
1x Raspberry Pi 3 Model B+
1x 8GB TF Card
1x 40-pin Ribbon Cable for T-Cobbler
1x T-Cobbler
1x Fan
1x Active Buzzer
20x Female-to-Male Dupont Wire
65x Male-to-Male Jumper Wire
1x Breadboard
4x Diode Rectifier
4x Capacitor Ceramic 10nF
4xCapacitor Ceramic 100nF
2x PNP Transistor (S8550)
2x NPN Transistor (S8050)
2x LED (yellow),2xLED (green), 2xLED (white),16xLED (red)
1x DC Motor
2x7-Segment Display
1x Dot Matrix Display (8*8)
1x LCD1602
1xPower Supply Module
1x Potentiometer (50k)
1x Switch
1x Resistor (5.1M),1xResistor (1M),4xResistor (100k),4xResistor (10k),8xResistor (1k),8xResistor(220)
5xButton
1x Rotary Encoder
1x Accelerometer ADXL345
1xL293D
2xShift Register (74HC595)
2xOptocoupler (4N35)
1x555 Timer IC
40xPinHeader
1xRGB LED
9. Adafruit DC & Stepper Motor HAT for Raspberry Pi 3 2 B B+ /A+ Robot Shield PWM
Feature
Full PWM speed controlOnboard chip handles all speed control via I2C
Use I2C to control I2C devices through the same pins
Uses 2ea TB6612 MOSFET with a current capability of 1.2 Amps
Description
Drives up to 4 DC motors or 2 Stepper motors. Connect to Pi via 2x20 Connection Port Full PWM speed control Onboard chip handles all speed control via I2C Use I2C to control I2C devices through the same pins Uses 2ea TB6612 MOSFET with a current capability of 1.2 Amps10. waveshare Raspberry Pi Motor Driver Expansion Module Board DC Motor Stepper Motor Driver DIY Mobile Robot Remote Control Based on Raspberry Pi A+/B+/2 Model B/3 B
Feature
The RPi Motor Driver Board gives your Pi the ability to drive two DC motors OR one stepper motor. It's an ideal choice to DIY mobile robot based on Raspberry Pi.Supports Raspberry Pi A+/B+/2B/3B
Freescale H-bridge driver MC33886, controls DC motors to turn in both directions
Onboard 5V regulator, provides power to Raspberry Pi
Onboard IR receiver, used for remote control robot
Description
OverviewThe RPi Motor Driver Board gives your Pi the ability to drive two DC motors OR one stepper motor. It's an ideal choice to DIY mobile robot based on Raspberry Pi.
Features
Supports Raspberry Pi A+/B+/2B/3B/3B+
Freescale H-bridge driver MC33886, controls DC motors to turn in both directions
Onboard 5V regulator, provides power to Raspberry Pi
Onboard IR receiver, used for remote control robot
Multi protection circuit, excellent stability
2A self-recovery fuse, keep your Pi safe
Driver chip features Short-Circuit Shutdown for Large Output Current, Undervoltage Disable Function
Reversed polarity protection for motor output
Anti-reverse diode for power supply
Power input range: 7V~40V
Single motor output current: up to 5A
Power supply current for Raspberry Pi: up to 2A
Package Contains
RPi Motor Driver Board x 1
RPi screws pack (2pcs) x 1
Development Resources
Wiki : www.waveshare.com/wiki/RPi_Motor_Driver_Board
100% original,offer technical support!
Recent Comments