Top 10 best chip quik flux 2019

Finding the best chip quik flux suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.

Best chip quik flux

Product	Features	Editor's score	Go to site
	SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar		Go to amazon.com
	Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip - SMD291		Go to amazon.com
	MG Chemicals - 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)		Go to amazon.com
	Soldering Flux TACK FLUX NO CLEAN 30CC SYRINGE		Go to amazon.com
	Soldering Flux Tack Flux 2cc		Go to amazon.com
	Tack Flux in 8cc Squeeze Tube (same flux as SMD291)		Go to amazon.com
	Soldering Flux Tack Flux No-clean Water Washable		Go to amazon.com
	SRA TF5000 No Clean Tacky Flux - 10cc		Go to amazon.com
	SMD291 Tack Flux in 75gram Jar		Go to amazon.com
	Fast Chip Kit for Quik SMD Removal with a Low Temperature Alloy		Go to amazon.com

Related posts:

1. SRA Soldering Products Rosin Paste Flux #135 In A 2 oz Jar

Feature

The ideal flux for electrical and electronic repairs
Contains 2 ounce in a "hockey Puck" jar
Formulated for use with tin/lead and lead-free alloys

Description

This petroleum/rosin contains NO Zinc Chloride or Ammonium Chloride, making it a better choice for electronic repairs. Rosin leaves a protective coating over soldered area once job is finished

2. Chipquik Tack Flux no clean in a 10cc syringe w/plunger & tip - SMD291

Feature

Remove QFDs, PLCCs, SOICs and chip components without costly equipment
Use with existing rework equipment or temp controlled soldering irons
Special removal alloy has excellent wetting ability
Low melting temperature
Safe, affordable, easy and won't damage sensitive components

Description

Remove QFDs, PLCCs, SOICs and chip components without costly and complex equipment. Use ChipQuik with your existing rework equipment or temperature controlled soldering irons. Special removal alloy has excellent wetting ability with a low melting temperature of 136F (58C). To use: apply paste flux to all leads with syringe; melt ChipQuik alloy on all pins of SMD; with wide iron tip; maintain alloy in a molten state long enough to release chip; lift chip from board with pick-up tool. Safe, affordable, easy and won't damage sensitive components. NoClean Paste Flux; 10cc syringe with tip.

3. MG Chemicals - 8341-10ML 8341 No Clean Flux Paste, 10 milliliters Pneumatic Dispenser (Complete with Plunger & Dispensing Tip)

Feature

Superior fluxing ability
Instant wetting
After soldering, the rosin residue is non corrosive, non conducting, moisture resistant, and fungus resistant
Compatible with lead free and leaded solder systems
Thixotropic paste; RoHS compliant

Description

No Clean Flux Paste. Convenient syringe dispenser ideal for touch up and repair of surface mount assemblies. A unique mixture of high grade synthetic resin and thixotropic agents designed specifically for use with high temperature lead free and conventional Sn/Pb alloys. It provides the fluxing activity levels that promote fast wetting action and maximum wetting spread. Flux paste is a no clean formulation therefore the residues do not need to be removed for most applications. Excellent wettability, no clean, non-conductive, non-tacky residues, compatible with lead free and leaded solder systems, thixotropic paste and RoHS compliant. RoHS compliant.

4. Soldering Flux TACK FLUX NO CLEAN 30CC SYRINGE

Feature

Chip Quik products use synthetic no clean flux, providing exceptional shelf life compared to natural rosin fluxes.
Flux: refrigerated >24 months, unrefrigerated >24 months
SnPb Solder Paste: refrigerated >12 months, unrefrigerated >6 months
SnBi Solder Paste: refrigerated >12 months, unrefrigerated >6 months
SAC305 Solder Paste: refrigerated >12 months, unrefrigerated >6 months

Description

Tack Flux no clean in a 30cc syringe w/plunger & tip. Low viscosity no-clean synthetic paste flux.

5. Soldering Flux Tack Flux 2cc

Feature

Chip Quik products use synthetic no clean flux, providing exceptional shelf life compared to natural rosin fluxes.
Flux Shelf Life: refrigerated >24 months, unrefrigerated >24 months
Refrigerate at 3-8C (37-46F)
Allow 4 hours for solder paste to reach an operating temperature of 20-25C (68-77F) before use
Package of 6 tubes, 2cc each

Description

Tack Flux in 6 -2cc Squeeze Tubes (same flux as SMD291). Low viscosity no-clean synthetic paste flux.

6. Tack Flux in 8cc Squeeze Tube (same flux as SMD291)

Feature

Tack Flux
Lead Free / RoHS
No Clean
Squeeze Tube

Description

Tack Flux in 8cc Squeeze Tube (same flux as SMD291). Low viscosity no-clean synthetic paste flux.

7. Soldering Flux Tack Flux No-clean Water Washable

Feature

Tack Flux
Lead Free / RoHS
Water Washable
Syringe

Description

Tack Flux no clean water washable 10cc syringe w/plunger & tip. Low viscosity no-clean water washable synthetic paste flux.

8. SRA TF5000 No Clean Tacky Flux - 10cc

Feature

No Clean Tacky Flux that is lower in odor and tackier than anything else on the market
This flux leaves very shiny solder joints and is Non-corrosive, Non conductive
Low Pleasant odor
Will not run all over PCB when applied

Description

The flux is Easily cleaned and comes in a 10 cc. Syringe with Plunger and tip.

9. SMD291 Tack Flux in 75gram Jar

Feature

Tack Flux
Lead Free / RoHS
No Clean
Jar

Description

SMD291 Tack Flux 75 gram in Jar. Low viscosity no-clean synthetic paste flux. Please note, we use the same size jar for both our 75g and 150g tack flux products. 75g is the net weight of the flux inside the jar. For our 75g product, the jar will be half full.

10. Fast Chip Kit for Quik SMD Removal with a Low Temperature Alloy

Feature

The Fast Chip SMD Removal Kit is a quick and inexpensive way to remove SMD components from a PCB without a hot air station using only your soldering iron.
Removes QFP's, PLCC's, SOIC's, and chip components under 300 degrees Fahrenheit
Enough material to remove 8-10 SMD'S
The Kit Contains: 2.7 ft. Fast Chip Removal Alloy - 1 2cc tube of SRA TF5000 No Clean Rework Paste Flux and complete Instructions for SMD Removal and Cleanup

Description

The heart of the kit is a length of Fast Chip low temperature Removal alloy. This alloy is like a solder that melts at temperatures well below that of normal solder (136F) and stays liquid long enough to melt the existing solder, allowing you time to carefully remove the component. Simply apply a liberal amount of the included flux to the pins of the chip that you want to remove, then use a soldering iron with a flat-edge tip to heat the pins while applying the low temperature alloy. The alloy will remain liquid for a few seconds while you coat all of the connections, once you've coated the pins you should be able to lift the chip free using tweezers or a hemostat. Clean the pads thoroughly and apply fresh solder and you're ready to solder a new part in place.

Conclusion

All above are our suggestions for chip quik flux. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using chip quik flux with us by comment in this post. Thank you!