Top 10 best chisel and punch set for 2019
Finding the best chisel and punch set suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best chisel and punch set
1. ATD Tools 729 29-Piece Punch and Chisel Set
Feature
(7) different types of punches and chisels for a variety of usesEach punch is hardened and tempered for maximum durability
Flat chisels are tempered and designed to resist splitting and mushrooming
Roll-up storage pouch
Made of high quality chrome vanadium steel
Description
This 29 piece punch and chisel set includes (7) pin punches: 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch, 1/4 inch, 5/16 inch and 3/8 inch, (6) starter punches: 3/32 inch, 1/8 inch, 5/32 inch, 3/16 inch, 1/4 inch and 5/16 inch, (4) center punches: 1/4 inch, 5/16 inch, 3/8 inch and 1/2 inch, (7) flat chisels: 1/4 inch, 5/16 inch, 3/8 inch, 1/2 inch, 5/8 inch, 3/4 inch and 7/8 inch, (2) cape chisels: 1/4 inch and 5/16 inch, (1) half-round nose chisel: 5/16 inch and (2) diamond point chisels: 5/16 inch and 3/8 inch. They are made of high quality chrome vanadium steel.2. Astro Pneumatic Tool 1600 16-Piece Punch and Chisel Set
Feature
Taper Punch: 3/32-inchby5-1/4-inch, 1/8-inchby5-3/4-inch, 5/32-inchby6-inch, 3/16-inchby6-1/4-inch, 1/4-inchby6-3/4-inchCold Chisels: 3/8-inch by 5-1/2-inch, 1/2-inch by 6-inch, 5/8-inch by 6-1/2-inch
Pin Punch: 3/32-inch by 4-1/4-inch, 1/8-inch by 4-3/4-inch, 5/32-inch by 5-inch, 3/16-inch by 5-1/4-inch, 1/4-inch by 5-3/4-inch
Center Punch: 1/8-inch by 5-inch, 3/16-inch by 6-inch
Product material: CR-V and hardness: 54~58HRC
Description
This kit is a complete punch and chisel solution. It is made of heat treated chrome vanadium steel. Includes storage pouch and chisel punch gauge. The product includes a storage pouch and chisel punch gauge. The kit includes the following: Punches - (5) Taper punches, (5) Pin punches, (2) Center punches. Chisels - (3) Clod chisels, (1) Chisel gauge and (1) Plastic storage tray. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.3. Performance Tool W754 28pc Punch and Chisel Set with Roll-up Vinyl Storage Pouch
Feature
Lifetime warrantyMachined heat-treated cams mounted on alloy Steel hex shafts
Set Includes 3/8 inch, 1/2 inch, and 3/4 inch extractors
Description
Internal pipe wrenches are designed to easily remove broken pipe threads, plugs and fittings. Suitable for multiple uses including broken heater hose fittings, household plumbing, to HVAC connections.4. GearWrench 82305 12 Piece Punch and Chisel Set
Feature
Chisel for Cutting Rivets, Bolts, and NutsPin Punch for Final Removal to Drive Out Pins and Rivets
Center Punch for Marking Center Lines and Pilot Drill Locations
Long Taper Punch to Install and Remove Pins and Shafts and to Align Holes
Starter Punch for Both Starting and Installing Pins and Rivets
Description
GearWrench introduced the original patented five-degree ratcheting wrench in 1996 and quickly became a go-to brand for professional automotive technicians. The innovation didn't stop there. Year after year, the GearWrench brand continues to expand its line-in ratcheting tools and beyond-to help automotive and industrial technicians get their jobs done faster and easier. Set Includes: 1/4" x 4-3/4" x 1/4" Cold Chisel,3/8" x 5" x 5/16" Cold Chisel, 1/2" x 6" x 3/8" Cold Chisel, 5/8" x 6-1/2" x 3/8" Cold Chisel, 3/8" x 5" Center Punch, 3/32" x 4-3/4" x 5/16" Pin Punch, 1/8" x 5" x 5/16" Pin Punch, 5/32" x 5-1/4" x 5/16" Pin Punch, 3/16" x 5-1/2" x 5/16" Pin Punch, 1/8" x 8" x 3/8" Long Taper Punch, 3/16" x 5" x 3/8" Starter Punch, 1/8" x 4-1/2" x 5/16" Starter5. Mayhew Pro 61044 Punch and Chisel Kit, 14-Piece
Feature
Designed for loosening frozen or tightening pins and keys or knocking out rivetsUsed for cutting, shaping and removing metal softer than the cutting edge of the chisel
Made from alloy steel which ensures long lasting durability
Description
Mayhew Punch and Chisel Kit is designed for loosening frozen or tightening pins and keys or knocking out rivets. It is used for cutting, shaping and removing metal softer than the cutting edge of the chisel. This chisel is for driving out and removing already loosened pins and keys after initial movement by a solid punch. It is made from stainless steel which ensures long lasting durability and is easy to use.6. 28 PC Industrial Heavy Duty Chisel & Punch Gauge Set Taper Center Cold Pin
Feature
28 PC Chisel & Punch Set16-pc. Industrial Punch & Chisel Set (Chrome-Vanadium Steel, Heat treated)
12-pc. Jumbo Punch & Chisel Set (Carbon steel, heat treated)
Approx. weight: 8lbs
Quantity: 1
Description
16-pc. Industrial Punch & Chisel Set
*Chrome-Vanadium Steel, Heat treated
*5-pc. Pin Punches:
3/32" x 4-1/4"
1/8" x 4-3/4"
5/32" x 5"
3/16" x 5-1/4"
1/4" x 5-3/4"
*5-pc. Taper Punches:
3/32" x 5-1/4"
1/8" x 5-3/4"
5/32" x 6"
3/16" x 6-1/4"
1/4" x 6-3/4"
*3-pc. Cold Chisels:
3/8" x 5-1/2"
1/2" x 6"
5/8" x 6-1/2"
*2-pc. Center Punches: 1/8" x 5", 3/16" x 6"
*1-pc. Chisel punch gauge
12-pc. Jumbo Punch & Chisel Set
*Carbon steel, heat treated
*6-pc. Cold Chisels:
1/2" x 6-3/4"
5/8" x 7"
3/4" x 8"
13/16" x 8"
7/8" x 10"
1" x 10"
*3-pc. Taper Punches:
1/8" x 6"
3/16" x 10-1/8"
3/8" x 10"
*1-pc. Pin punch: 3/8" x 8"
*2-pc. center punches:
5/32" x 5-3/4"
1/4" x 7-7/8
7. ABN Cold Chisel Set Automotive Punch Tool Kit 29-Piece Punch Chisel Set Pin Punch Set, Center Punch Set, More
Feature
GET THE JOB DONE RIGHT: The ABN Metal Punch Set & Steel Chisel Set is a 29-piece kit of metalworking chisels and punches used for machinist work on all hard materials (not recommended for use on wood); This metal chisel set and automotive punch set includes chisels for cutting, shaping, and removing metal that is softer than the cutting edge; Included pin punches drive or remove pins, rivets, and keys; Starter punches drive pins or bolts from holes that have a forced fitBUILT TO LAST: Punches set constructed from hardened and tempered chrome-vanadium steel (CR-V) for maximum strength and longevity; Flat chisels are constructed from tempered chrome-vanadium steel (CR-V) for resistance to splitting and mushrooming
VARIOUS SIZES: The longest piece is 8 inches (20.3cm) and the shortest piece is 4 inches (10.2cm); Pin punches - 3/32", 1/8", 5/32", 3/16", 1/4", 5/16", and 3/8"; Starter punches - 3/32", 1/8", 5/32", 3/16", 1/4", and 5/16"; Center punches - 1/4", 5/16", 3/8", and 1/2"; Flat chisels - 1/4", 5/16", 3/8", 1/2", 5/8", 3/4", and 7/8"; Cape/slot chisels - 1/4" and 5/16"; Diamond point chisels - 5/16" and 3/8"; Half-round nose chisel - 5/16"
EASY STORAGE: Heavy-duty 15" x 1" x 20" inches (38.1cm x 2.5cm x 50.8cm) canvas storage pouch that includes 3 metal ring grommet mounting holes to hang on your pegboard or wall; Each pocket includes an imprinted punch size to allow you to keep tools in order; Rolls up and ties shut to be 3.5" x 8.25" x 3.5" inches (8.9cm x 21cm x 8.9cm) for easy transportation, safe storage, and quick organization when not in use; Vibrant blue color is easy to spot across the shop and in your pack of tools
PACKAGE CONTENTS: Punch and Chisel Kit includes (7) different types of punches and chisels including (7) pin punches, (6) starter punches, (4) center punches, (7) flat chisels, (2) cape/slot chisels, (2) diamond point chisels, (1) half-round nose chisel, and (1) roll-up pouch for your convenience
Description
Cut, shape, and remove metal, remove pins, rivets, and keys, drive pins or bolts from force fit holes, and more with the ABN Chisel Punch Set. The punches and chisels in this kit can be used to work on all hard materials and are constructed from chrome-vanadium steel (CR-V) for maximum strength and longevity. This cold chisel and punch set includes 7 pin punches (3/32", 1/8", 5/32", 3/16", 1/4", 5/16", 3/8"), 6 starter punches (3/32", 1/8", 5/32", 3/16", 1/4", 5/16"), 4 center punches (1/4", 5/16", 3/8", 1/2"), 7 flat chisels (1/4", 5/16", 3/8", 1/2", 5/8", 3/4", 7/8"), 2 cape/slot chisels (1/4" and 5/16"), 2 diamond point chisels (5/16" and 3/8"), and 1 half-round nose chisel (5/16") all packed inside a roll-up pouch for your convenience. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.8. Mayhew 61510 10-Piece Hardened Steel Cold Chisel Set
Feature
Used to cut and shape metals softer than the cutting edge of the chiselCutting edge angle designed to provide greater strength
Not intended to be used on masonry materials
Available in a variety of lengths and sizes to fit any application. Shot-blasted finish.
Description
Cold chisels are used for cutting and shaping metals softer than the cutting edge. Available in many lengths and sizes to fit any application. Comes with an unlimited lifetime warranty. Mayhew stands for quality, dependability, and confidence. When the caliber of the tools is just as important as the skills of the professionals employed, businesses trust Mayhew to get the job done. Since 1856, our punches, chisels, and pry bars have been the go-to tools for oems and professional mechanics throughout the country. And while our Company has grown to meet the needs of the professional market, as well as those of the do-it-yourself automotive enthusiast, our focus has never changed - leveraging our strength to build your business.9. Mayhew Pro 62065 5Piece Pin Punch Set with Extra Long Pin Lengths
Feature
Extra Long Pin LengthsAll Pin Punches have an 8" OAL and a 3.5" pin length (except for the 1/8 point which is 3")
Set includes 5 different point sizes: 1/8, 3/16, 1/4, 5/16, and 3/8
Black oxide finish for rust protection
Description
The Mayhew 62065 446-K Pin Punch Kit, 5-Piece comes in a pouch. Set contains the following items:21500 1/8 point, 3 pin length, 8 OAL
21501: 3/16 point, 3.25" pin length, 8" OAL
21502: point, 3.25" pin length, 8" OAL
21503: 5/16 point, 3.25" pin length, 8" OAL
21504: 3/8 point, 3.25" pin length, 8" OAL
While our company has grown to meet the needs of the professional market, as well as those of the do-it-yourself automotive enthusiast, our focus has never changed leveraging our strength to build your business. Comes with an unlimited lifetime warranty. Mayhew stands for quality, dependability, and confidence. When the caliber of the tools is just as important as the skills of the professionals employed, businesses trust Mayhew to get the job done. Since 1856, our punches, chisels, and pry bars have been the go-to tools for OEMs and professional mechanics throughout the country. And while our company has grown to meet the needs of the professional market, as well as those of the do-it-yourself automotive enthusiast, our focus has never changed - leveraging our strength to build your business.
10. SK 6016 Punch and Chisel Set 16 Piece
Feature
Strength and precisionFeaturing 4 different types of punch and chisel for a variety of uses
Packaged in a case
Made in the U.S.A
Lifetime Warranty
Recent Comments