Top 10 best crosstrek mods for 2019
Finding the best crosstrek mods suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best crosstrek mods
1. shinehome 6mm/236mil Car Heat Shield Sound Deadener Deadening Heat Insulation Mat Noise Insulation and Dampening Mat Heat Proof Mat 40" x 30"8.18sqft
Feature
100% Brand NewThickness: 6mm, High quality tri-layer, twin density lightweight foam laminateHigh noise reduction & thermal insulation propertiesNon-flammable, flame retardant
High temperature resistanceEasy to cut & fit, strong adhesive backing
High thermal & acoustic propertiesDurable outer cover material for tough environments
applications: Exterior bulkhead, firewall, hood, engine compartment, engine bays. boot, wheel arch, body panels, load floor, under seat, floor, interior bulkhead. Also ideal for under floor applications as it has great load resistance properties.
Description
description:1.High quality tri-layer, twin density lightweight foam laminate
2.High noise reduction & thermal insulation properties
3.High temperature resistance
4.High thermal & acoustic properties
5.Durable outer cover material for tough environments
6.Easy to cut & fit, strong adhesive backing
7.Non-flammable, flame retardant
Installation:
1, Remove the door panels
2, Install the screws back in original place, it will easy be found when you mount, avoiding holes be covered
3, With roller tools will make insulation materials and sheet metal firm fit, and play best adhesive, damping performance
4, According to the effect you want choose construction program, only single Soundproof/Damping Plate or single Heat & Noise Insulation Cotton or Both them.
5, You can also use on car roof floors, hood , firewall, chassis, trunk room, trunk lid and so on.. Do not cover the chassis wiring or air holes.
applications:
Exterior bulkhead, firewall, hood, engine compartment, engine bays.boot, wheel arch, body panels, load floor, under seat, floor, interior bulkhead.
Also ideal for under floor applications as it has great load resistance properties.
Package Included:one mat
Attention:if the quatity you order is two or more, we usually ship them out in one roll based on the total size, for example, you order 2 pcs 8" x 40", we will ship out 16" x 40", so if you need to cut 2 pcs 8" x 40", please contact us in time, thanks
2. Custom Fit Cup Holder and Door Liner Accessories for 2018 2019 Subaru Impreza and Crosstrek 14-pc Set (Red Trim)
Feature
Five color options allow you to add a cool splash of color to your new subie, while a double raised edge design keeps spills and crumbs contained within the linerCustom fit set is like floor mats for your door pockets, cup holders, and center console areas providing unmatched protection from hard to clean spills and water rings
Guaranteed fit for your 2018+ Subaru Crosstrek or Subaru Impreza in any of the following trims: 2.0i, 2.0i Premium, 2.0i Sport, 2.0i Limited in either manual or CVT automatic transmissions, in both hatchback and sedan body styles.
Patent pending design is simple to install, easy to clean, and provides a soft surface to prevent items from rattling in your cars compartments.
Includes a hassle free lifetime guarantee so that you will be protected for the lifetime of your car
Description
By purchasing Cup Holder Heros you'll add a cool splash of color to your interior and make cleaning your car a breeze! If you spill or get crumbs in any compartment simply remove them and wash them in the sink!This is one kit of 14 custom fit mats for your new car! (Trims below Limited will have 2 extra circle liners that will not have a place in the car. Feel free to use them as coasters in your house) They fit all 5th generation Subaru Impreza's (2017, 2018, 2019, 2020) Subaru Crosstrek's (2018, 2019, 2020, 2021) SOLD IN NORTH AMERICA (CANADA AND US ONLY!)
Eco friendly digital installation location map can be found on the product page
Care Instructions:
Cleaning: To clean the mats carefully use the convenient pull tab and remove them from the car. You can then shake them out, and if needed wash them with warm soapy water.
Curled Mats: During shipping mats may get slightly bent and not sit flat in the compartments. (This happens to less than 1% of orders) The mats usually fix themselves over 1-2 weeks by being in a hot car. If you are in a cold climate you may need to use a hair dryer, wash the mat with hot water, or place them on your dashboard in the sun to fix the curling.
3. Husky Liners Front & 2nd Seat Floor Liners Fits 16-17 Crosstrek, 12-18 Impreza
Feature
Footwell Coverage covers entire footwell (does not include coverage under 2nd seat)FormFit Edge is a raised ridge that runs along the door jam, protecting your truck or SUV from all manner of mess
StayPut Cleats help keep the liner from shifting around underfoot
No Hassle Lifetime Guarantee
Designed and manufactured in the USA
Description
WeatherBeater Floor Liners are engineered to fit the complex contours of your vehicle's carpeted floor boards, trunks, and cargo areas. The Husky Floor Liners form-fit design and raised containment walls will help keep your carpet clean even in the worst weather conditions. Fluid containment ribs and treads channel messes away from your shoes. This unique design keeps mud, snow, water and debris off your vehicle's expensive, hard to clean carpet. Husky WeatherBeater Floor Liners incorporate key elements from your vehicle's interior, giving your Floor Liner a customized look and feel. The patented "form-fit edge" at the door thresholds contain debris and allow for easy vehicle entry and exit. Husky WeatherBeater Floor Liners are easy to clean and built to last with a lifetime warranty against cracking and breaking. The patented rubberized material withstands most harmful chemicals including oil, gas, and battery acid. To help prevent your liners from shifting, most front and rear seat Floor Liners are designed with patented "SPiN" (Sta-Put Nibs) technology. The anti-shift nibs on the back of the liner grip the carpet and helps hold your liner in place without the use of additional fasteners. Proudly engineered and manufactured in the USA. It offers applications for most of today's popular cars, crossovers, sport utilities, and trucks.4. MR502 VT-SPEC 2, 15x7, +15mm Offset, 5x100, 56.1mm Centerbore, Matte Black
Feature
Low offset gravel rally race wheelWeight saving pockets around wheel face
2100 lb load rating
Race wheels have no structural or finish warranty due to their intended use
Description
The MR502 Rally VT-Spec is the wheel that started our venture into rally racing. Developed as a low-offset 15 gravel wheel for their new car, Subaru Rally Team USAs David Higgins and Craig Drew won a 2014 Rally America Championship on this exact wheel. Unnecessary weight has been cut out due to strategically placed pockets in low-stress points around the wheel, including the 'I-Beam' inner-lip technology. Matte black paint and steel lug nut inserts come standard on the VT-Spec providing a hardened clamping surface able to withstand rigorous race conditions. The 502 comes in at 19.4 lbs with a stout 2,100lb load rating. With a +15mm offset, 5x100 and 5x114.3 bolt patterns, fitment is ideal for Subaru and Mitsubishi vehicles.5. Husky Liners Front & 2nd Seat Floor Liners Fits 17-18 Impreza
Feature
Form Fit Design process perfectly forms each liner to the detailed contours of your specific rideOur Cargo Liners are made from a proprietary material blend that is sporty and rugged.
Our Cargo Liners are ridiculously easy to install, remove, and clean.
Designed and manufactured in the USA
Description
Put Nature firmly in its place. The rugged and sporty Weather Beater Floor Liners perfectly conform to the contours of your ride and offer un-beatable carpet protection for whatever nature hurls at you.6. iJDMTOY Red Lens 3-In-1 LED Rear Fog Light Kit For 11-up Subaru Impreza WRX/STi, Functions as Tail Lamp, Brake Lamp, Backup Reverse Light (Includes Wire Harness & Mounting Bracket)
Feature
Complete kit comes with LED rear fog light, wiring harness, back mounting bracket, taps and screwsRed lens, powered by 12 pieces red LED lights for the rear fog light with brake/tail feature and 4 pieces white LED lights for backup reverse
Give your Subaru a better and brighter genuine Japnese JDM look!
Direct fit for 2011-up Subaru WRX/STI. However for Subaru Impreza and XV Crosstrek, there are some mods/adjustments are required (see description for more detail)
This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
Want your Subie to break necks? You should definitely get this 3-in-1 JDM LED rear fog light/backup light that will convert your US/North American version's lightless Subaru to a JDM style rear fog light plus additional brake and backup reverse features.
This red lens LED rear fog light's design is inspired by the all new Subaru BRZ's LED tail light with a fluid, continuous lighting and it is compatible with the following Subaru
2011-up Subaru WRX/STi
2011-2016 Subaru Impreza
2013-up Subaru XV Crosstrek
There are 4 pieces of Samsung LED in the center that function as reverse lights and a surrounding red LED border for the tail light and brake light.
This is the latest LED technology you will see on many new cars for their tail lamp designs, which gives your Subaru a nice JDM look, just brighter and better.
Special Note
For Subaru Impreza and XV Crosstrek, since the rear fog lamp opening on the bumper was not opened completely, you can not use the metal bracket come with this product, instead, you have to make some spacers in order to position this LED rear fog lamp evenly into the rearfog opening.
Wiring Instructions:
This product comes with an additional free 7440 harness for installation. The side with the 7440 harness is to be installed facing the bottom in the LED rear fog light assembly.
Step 1: For the harness, tap the red wire to the existing taillight positive and the black wire to the ground or taillight negative.
Step 2: There are two extra wires behind the LED rear fog light (red and white). Tap the red wire to brake light positive for brake light mode and tap the white wire to backup reverse light positive to function as reverse lights.
7. Lebra 2 piece Front End Cover Black - Car Mask Bra - Fits Subaru XV Crosstrek Including Hybrid 2013 2014 2015
Feature
New 2pc Car Mask. Easy Installation.Protects against Bugs,Rock and Chips. Custom Made for your Vehicle.
Hood opens with Mask in place
Covers all painted front end surfaces
Accomodates for pop-up headlights, fog lights, air-intakes, and all factory design features.
Description
Fitted to cover all painted frontal surfaces, the two-piece LeBra All-Weather Car Bra is constructed with convenience in mind - you can open your hood with it in place, and the unit doesn't need to be removed when it gets wet. An inner lining made of unique knit material resists moisture while protecting the shine and finish of your car. Custom-made for your vehicle. The LeBra All-Weather Car Bra remains in place even when wet8. Covercraft UV11501RO Rose UVS 100 Custom Fit Sunscreen for Select Subaru Crosstrek/Impreza Models - Laminate Material, 1 Pack
Feature
Custom fit to the windshield for complete coverageProtect the dash and other interior components from damage by the sun
Reduce the interior temperature of the vehicle on hot days
The foam core center of the shield acts as an insulator
Easy to use and store away when not in use
Description
The UVS100 Sunscreen is an affordable way to protect the interior of your vehicle from damaging UV rays as well as adding a level of comfort and protection by reducing the interior temperature of the vehicle on hot days. The sunscreen is custom-fitted so that there is maximum coverage of the windshield area.9. iJDMTOY Dark Smoked Lens F1 Style LED Rear Foglamp Kit For 11-up Subaru WRX/STi Impreza XV Crosstrek, Strobe Flashing Feature w/ Wiring Harness & Mounting Bracket Included
Feature
Complete kit comes with LED rear fog light, wiring harness, back mounting bracket, taps and screwsSmoked lens, powered by 12 pieces brilliant red LED lights with F1 style 3-second strobe flashing feature as brake light
Give your Subaru a better and brighter genuine Japnese JDM look!
Direct fit for 2011-up Subaru WRX/STI. However for Subaru Impreza and XV Crosstrek, there are some mods/adjustments are required (see description for more detail)
This is an iJDMTOY Trademark Brand product, exclusively available at iJDMTOY
Description
Want your Subie to stand out? You must get this F1-Style LED rear fog light/tail/brake lamp that will convert your US/North American version's lightless Subaru with a F1 style rear fog light with additional strobe/braking function.
This smoked lens LED rear fog lights inspired by the F1 racing car with a 3-second strobe feature for the braking mode to direct fit for the following:
2011-up Subaru WRX/STi
2011-2016 Subaru Impreza
2013-up Subaru XV Crosstrek
Special Note
For Subaru Impreza and XV Crosstrek, since the rear fog lamp opening on the bumper was not opened completely, you can not use the metal bracket come with this product, instead, you have to make some spacers in order to position this LED rear fog lamp evenly into the rearfog opening.
Wiring Instructions:
This product comes with an additional free 7440 harness for installation as well as a pre-installed T20 adapter. The side with the 7440 harness is to be installed facing the bottom in the LED rear fog light assembly.
Step 1: For the harness, tap the red wire to the existing taillight positive and the black wire to the ground or taillight negative.
Step 2: There is a yellow wire behind the LED rear fog light and well as a wire extender included in the package. Tap the yellow wire to brake light for the LED rear fog lamp assembly to strobe 3x fast, 3x steady.
10. Husky Liners Front & 2nd Seat Floor Liners Fits 16-17 Crosstrek, 12-18 Impreza
Feature
Footwell Coverage covers entire footwell (does not include coverage under 2nd seat)FormFit Edge is a raised ridge that runs along the door jam, protecting your truck or SUV from all manner of mess
StayPut Cleats help keep the liner from shifting around underfoot
No Hassle Lifetime Guarantee
Designed and manufactured in the USA
Recent Comments