Top 10 best tweeters prv 2 for 2019
Finding the best tweeters prv 2 suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best tweeters prv 2
1. 2 Pair PRV Audio WG175Ph 150W 8-Ohms Tweeter/Horn Driver DT175Ph-S and WG11-25
Feature
4 HORN DEAL Throat Diameter: 1" Type: Tweeter / Horn Driver comboNominal Impedance: 8 Rated Power Handling: 75 Watts Each Horn Program Power: 150 Watts Each Horn
Sensitivity (1W/1m): 108 dB Frequency Range at -10 dB: 1,300 - 19,000 Hz
Recommended Hi Pass X-Over: 3000 Hz (12 dB/Octave) Voice Coil Diameter: 1"
Magnet Material: Ferrite Diaphragm Type: Phenolic Weight: 1.92 Lbs
Description
Throat Diameter: 1" Type: Tweeter / Horn Driver combo Nominal Impedance: 8 Rated Power Handling: 75 Watts Each Horn Program Power: 150 Watts Each Horn Sensitivity (1W/1m): 108 dB Frequency Range at -10 dB: 1,300 - 19,000 Hz Recommended Hi Pass X-Over: 3000 Hz (12 dB/Octave) Voice Coil Diameter: 1" Magnet Material: Ferrite Diaphragm Type: Phenolic Weight: 1.92 Lbs2. prv WGP1450CHROME Audio 2" Exit ABS Wave Guide, Bolt
Feature
PRB Exit WAVE GUIDE BoltDescription
140 wide dispersion pattern with minimal vertical dispersion Stackable design for tight grouping1.4" throat diameter Lightweight aluminum construction Acoustically loads compression drivers down to 1,000 Hz3. (2) PRV Audio TW700Ti Titanium Bullet Pro or Car Super Tweeter TW700 8 ohms 480W 1 Pair
Feature
( 2 TWEETER DEAL ) Impedance: 8 ohmsSpecifications: Power handling: 120 watts RMS Each
Recommended crossover of 5,000 Hz, 12 dB/octave
SPL: 108 dB 1W/1m Dimensions (H x W x D): 4'' x 4'' x 2.55''
Frequency response: 3,500-20,000 Hz
Description
high frequency response to any speaker system. The titanium, ring-radiator diaphragm combines with the durable, yet light weight, Kapton voice coil former for sensitivity levels of up to 108 dB from 3,500 to 20,000 Hz. A controlled 50 x 50 coverage pattern reduces reflections and close side by side mounting is facilitated by flat sides. Not only does this driver look as good as it sounds it is also able to take a huge amount of power due to its 1.5'' diameter copper voice coil. Up to 120 watts of power handling are on tap with a 12 dB/octave crossover at 5,000 Hz to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems. A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included. Specifications: Power handling: 120 watts RMS Each with recommended crossover of 5,000 Hz, 12 dB/octave Minimum recommended crossover point: 5,000 Hz VCdia: 1.7'' Impedance: 8 ohms Frequency response: 3,500-20,000 Hz SPL: 108 dB 1W/1m Dimensions (H x W x D): 4'' x 4'' x 2.55'' Replacement diaphragm available (294-2819). Highlights Titanium ring-radiator diaphragm for accurate and detailed response Kapton voice coil former ensures high power handling and reliability Front mount design for easy installation, flat sides for side-by-side multiple driver arrays4. PRV Audio WG2500Ti Titanium 2" Exit 8 ohms 2.5" VC Pro Audio Compression Driver with Aluminum Horn 107dB 100 Watts RMS - Combo
Feature
The WG2500Ti is a unique combo featuring a Titanium Pro Audio compression driver with a 2" exit waveguide that features a special 2.5" size voice coil allowing accurate reproduction through 17kHz.The pure titanium diaphragm supported by a Kapton former results in a light weight, yet durable design and offers a more natural sound for high SPL applications.
High output mobile audio enthusiasts choose the PRV Audio WG2500Ti for extreme SPL car audio competitions where the small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn.
The small diameter of the driver allows front mounting, making it easy to install, without detaching the driver from the horn.
Program Power: 200 Watts
Description
TITANIUM COMPRESSION DRIVER + HORN - COMBO Throat Diameter: 2" Type: Combo Nominal Impedance: 8 Rated Power Handling: 100 Watts Program Power: 200 Watts Sensitivity (1W/1m): 107 dB Frequency Range at -10 dB: 1,200 -17,000 Hz Voice Coil Diameter: 2.5" Magnet Material: Ferrite Diaphragm Type: Titanium Weight: 10.32 Lbs Mounting Depth: 7.71" (196 mm) Replacement Cone Kit: RPD2500Ti5. Lanzar Upgraded Bullet Super Tweeter - Powerful Heavy Duty Aluminum -600 Watt Peak 2k - 20kHz Frequency Response and 4 Ohm w/ 102dB (1w/1m) Sensitivity and 1.75 Kapton Voice Coil - Optidrive OPTIBT44
Feature
2k - 20 kHz FREQUENCY RESPONSE: Lanzar, optidrive tweeter speaker has neodymium magnet structure and frequency response that complete the package. Also, pack with exceptional 102dB (1w/1m) decibel sensitivityPOWERFUL 600 WATTS: This bullet super tweeter speaker provide up to 600 watts peak power because it is equipped with neodymium housed structure. It's all housed in durable aluminum die-cast frames
4-OHM MIN IMPEDANCE: This upgraded car tweeter has 4-ohm impedance rating that compensates the undersized wire found in many of today's cars. It has ferrofluid enhanced voice coil that ultimately reduces distortion so you can enjoy a crisp sound
1.75" KAPTON VOICE COIL: Lanzar tweeter are capable of 1.5" higher or elevated temperature strength and fatigue properties. It will increase performance and efficiency of heavy-duty play time through lower weight and higher operating temperatures
SIZE: Lanzar upgraded car speaker measures 4.52'' in overall diameter with a mounting depth of 2.83". The heavy-duty die-cast frame and neodymium magnet structure provides a strong foundation for full range car tweeter speaker from Lanzar
Description
Lanzar OPTI BULLETS TWEETERS6. PRV Audio D3220Ti-Nd 2" Exit Titanium Neodymium 220 Watts RMS Pro Audio Compression Driver 3" VC 110dB (Single)
Feature
PRO AUDIO TITANIUM COMPRESSION DRIVERThe D3220Ti-Nd is designed to ensure a quality sound and long lasting play in your large environment applications
Rated Power Handling: 110 Watts
Program Power: 220 Watts
Replacement Diaphragm: RPD3220Ti
Description
PRO AUDIO TITANIUM COMPRESSION DRIVER Throat Diameter: 2" Type: Bolt-On Nominal Impedance: 8 Rated Power Handling: 110 Watts Program Power: 220 Watts Sensitivity (1W/1m): 110 dB Frequency Range at -10 dB: 1,600 - 19,000 Hz Recommended Hi Pass X-Over: 1600 Hz (12 dB/Octave) Voice Coil Diameter: 3" Magnet Material: Neodymium Diaphragm Type: Titanium Weight: 4.72 Lbs Replacement Diaphragm: RPD3220Ti7. (2) PRV Audio TW700Ti Titanium Bullet Pro or Car Super Tweeter TW700 8 ohms 9600W 2 Pair
Feature
( 4 TWEETER DEAL ) Impedance: 8 ohmsSpecifications: Power handling: 120 watts RMS Each
Recommended crossover of 5,000 Hz, 12 dB/octave
SPL: 108 dB 1W/1m Dimensions (H x W x D): 4'' x 4'' x 2.55''
Frequency response: 3,500-20,000 Hz
Description
high frequency response to any speaker system. The titanium, ring-radiator diaphragm combines with the durable, yet light weight, Kapton voice coil former for sensitivity levels of up to 108 dB from 3,500 to 20,000 Hz. A controlled 50 x 50 coverage pattern reduces reflections and close side by side mounting is facilitated by flat sides. Not only does this driver look as good as it sounds it is also able to take a huge amount of power due to its 1.5'' diameter copper voice coil. Up to 120 watts of power handling are on tap with a 12 dB/octave crossover at 5,000 Hz to keep up with the most demanding professional audio, high output home audio, and high SPL car audio systems. A capacitor is included for protection from damaging frequencies at high power. Mounting hardware included. Specifications: Power handling: 120 watts RMS Each with recommended crossover of 5,000 Hz, 12 dB/octave Minimum recommended crossover point: 5,000 Hz VCdia: 1.7'' Impedance: 8 ohms Frequency response: 3,500-20,000 Hz SPL: 108 dB 1W/1m Dimensions (H x W x D): 4'' x 4'' x 2.55'' Replacement diaphragm available (294-2819). Highlights Titanium ring-radiator diaphragm for accurate and detailed response Kapton voice coil former ensures high power handling and reliability Front mount design for easy installation, flat sides for side-by-side multiple driver arrays8. 2 Pair PRV Audio TW350Ti Titanium Bullet Pro or Car Super Tweeter 480W 8 ohms
Feature
( 4 Tweeter Deal ) Type: Super Tweeter 8 OhmRated Power Handling: 60 Watts Each Tweeter Program Power: 120 Watts Each Tweeter
Sensitivity (1W/1m): 105 dB Frequency Range at -10 dB: 3,500 - 20,000 Hz Recommended Hi Pass X-Over: 5000 Hz (12 dB/Octave)
Voice Coil Diameter: 1" Magnet Material: Ferrite Diaphragm Type: Titanium
Weight: 1.37 Lbs Replacement Diaphragm: RPTW350Ti
Description
Type: Super Tweeter Nominal Impedance: 8 Rated Power Handling: 60 Watts Each Tweeter Program Power: 120 Watts Each Tweeter Sensitivity (1W/1m): 105 dB Frequency Range at -10 dB: 3,500 - 20,000 Hz Recommended Hi Pass X-Over: 5000 Hz (12 dB/Octave) Voice Coil Diameter: 1" Magnet Material: Ferrite Diaphragm Type: Titanium Weight: 1.37 Lbs Replacement Diaphragm: RPTW350Ti9. prv WGP1450ORANGECR Audio 2" Exit ABS Wave Guide, Bolt
Feature
PRB Exit WAVE GUIDE BoltDescription
140 wide dispersion pattern with minimal vertical dispersion Stackable design for tight grouping1.4" throat diameter Lightweight aluminum construction Acoustically loads compression drivers down to 1,000 Hz10. prv WGP1450REDCR Audio 2" Exit ABS Wave Guide, Bolt
Recent Comments