Top 10 distribution block with voltage
If you looking for distribution block with voltage then you are right place. We are searching for the best distribution block with voltage on the market and analyze these products to provide you the best choice.
Best distribution block with voltage
1. Bay Marine Supply BusBar 12-Point Power Distribution Block #8 Terminal Screws & 1/4 Stud Red
Feature
Available in 4 sizes, all with covers. Made in the USA of nickel plated brass bars, stainless steel hardware, and glass-filled nylon for strong, corrosion-free service.4-post models available in 5/16" or 3/8" posts, with 3 additional #8 screws for small attachments. Rated at 250 amps at 12VDC, maximum 48VDC.
10-point terminal strips have #8 screws and two 1/4" post for the primary connection, protected by a durable cover with retainers. Rated at 150 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
12-point terminal strips have #8 screws and a single 1/4" post for the primary connection, protected by a durable rubber cap. Rated at 180 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
Dual-post models have two separate bars separated by a full-lengh divider to handle both positive and negative connections on a compact footprint. Available with 5/16" or 3/8" posts. Rated at 250 amps per bar at 12VDC, maximum 48VDC.
Description
All models feature:Made in the USA
Available in black or red (except dual row models)
Nickel plated brass contact plate for low resistance and protection against corrosion
Stainless steel screws, hex nuts, and washers
Base material is glass-filled nylon
When used with appropriate insulators and shrink tube, meets USCG 33 CFR Subpart I, SAE J2120 8.5 & ABYC E-9.4 H.
4-post models feature:
Available with 5/16" or 3/8" posts
Max amperage: 250 Amps at 12VDC
Max voltage: 48VDC
3 additional #8-32 screws for small connections
Mounting screws: #10 (not included)
Mounting center: 5.7 inch
Dimensions (with cover): 6.6 x 1.4 x 2.0 inch (168 x 35 x 50 mm)
10-point models feature:
10 x #8-32 stainless steel screws
2 x 1/4" stainless steel terminal post
Max Continuous Amperage: 150 amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with covers): 7.2 x 1.9 x 1.7 inch (182 x 48 x 43 mm)
Includes large cover with retainers
12-point models feature:
12 x #8-32 stainless steel screws
1 x 1/4" stainless steel terminal post
Max Continuous Amperage: 180 Amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with cover): 5.5 x 1.4 x 1.2 inch (140 x 35 x 30 mm)
Includes terminal insulator for large stud and cover for screws
Dual-bus models feature:
Similar to 4-post models, with two bars on one base
Bars available with combinations of 5/16" or 3/8" posts
Center divider to separate positive and negative connections
Mounting center: 5.7 inch
Dimensions (with cover): 5.75 x 2 x 3.25 inch (146 x 50 x 82 mm)
2. 225FWY Gold Premium Digital Voltage Meter & Distribution Block 0 In 2/4/8 Gauge AWG
Feature
Built-in digital voltage meter with 3 digit red LED displayMeasures voltage from 10 - 18V
One 1 or 0 Gauge input
One 2 Gauge, One 4 Gauge, and One 8 Gauge Output
Description
Brand new gold plated distribution block with built in digital volt meter. This is a quality machined distribution block that will accept a 0 or 2 gauge wire input which is distributed to one 2 or 4 gauge output, two 8 gauge outputs, and one 4 or 8 gauge output.3. 8 Way Terminal Block - Splits 1 Input to 8 Out
Feature
Operating Voltage: DC 12VDescription
An 8 way terminal block bus bar, allows a single power supply to be connected to up to 8 devices. OR An 8 way terminal block bus bar, allows a single Controller to control up to 8 devices.4. 225FWY Platinum Premium Digital Voltage Meter & Distribution Block
Feature
Built-in digital voltage meter with 3 digit red LED displayMeasures voltage from 8 - 18V
One 1 or 0 Gauge Input
One 2 Gauge, Two 4 Gauge, and Two 8 Gauge Output
Finished Platinum
Description
Brand new platinum plated distribution block with built in digital volt meter. This is a quality machined distribution block that will accept a 0 or 2 gauge wire input which is distributed to one 2 or 4 gauge output, two 8 gauge outputs, and one 4 or 8 gauge output.5. Summer-Home 5Pcs 15A 600V 12 Position Covered Dual Row Screw Terminal Barrier Strip Block Connector Bar
Feature
The shell can not break in an environment with low temperature, it is clean and beautiful with smooth surfaceVolume -small, good electrical conductivity, the shape of the screw hole closed guide, not only can conveniently operate, but also prevents the screw from falling out
Used in power supply, communication, cable, fiber optics, sensors, etc.;Each pair of terminals is insulated from the next, prevent circuit in disorder
Waterproof and Insulation;Easy to slide wire, easy to use;Gasket compaction is not dissolved, solid and reliable
The potential distribution can be accomplished through access to the central terminal fittings or insert plug body side connector terminals;The piece are connected with a complete with excellent electrical conductivity metal contact and the contact piece
Description
Contact Material: CopperInsulator Material: ABS plastic
Colour: Black
Maximum rated voltage: 600V
AMPS Maximum Rated: 15A
Poles: 12-pin (two rows)
Quantity: 5PCS
Weight: 244g(appr.)
Size: 12.7x2.2x1.6cm / 5 "x0.87" x0.63 "(appr.)
Package included:
5 X Terminal Electric Barrier Strip Block
6. Bay Marine Supply BusBar 4-Post Power Distribution Block Pair of 3/8 Black & Red
Feature
Available in 4 sizes, all with covers. Made in the USA of nickel plated brass bars, stainless steel hardware, and glass-filled nylon for strong, corrosion-free service.4-post models available in 5/16" or 3/8" posts, with 3 additional #8 screws for small attachments. Rated at 250 amps at 12VDC, maximum 48VDC.
10-point terminal strips have #8 screws and two 1/4" post for the primary connection, protected by a durable cover with retainers. Rated at 150 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
12-point terminal strips have #8 screws and a single 1/4" post for the primary connection, protected by a durable rubber cap. Rated at 180 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
Dual-post models have two separate bars separated by a full-lengh divider to handle both positive and negative connections on a compact footprint. Available with 5/16" or 3/8" posts. Rated at 250 amps per bar at 12VDC, maximum 48VDC.
Description
All models feature:Made in the USA
Available in black or red (except dual row models)
Nickel plated brass contact plate for low resistance and protection against corrosion
Stainless steel screws, hex nuts, and washers
Base material is glass-filled nylon
When used with appropriate insulators and shrink tube, meets USCG 33 CFR Subpart I, SAE J2120 8.5 & ABYC E-9.4 H.
4-post models feature:
Available with 5/16" or 3/8" posts
Max amperage: 250 Amps at 12VDC
Max voltage: 48VDC
3 additional #8-32 screws for small connections
Mounting screws: #10 (not included)
Mounting center: 5.7 inch
Dimensions (with cover): 6.6 x 1.4 x 2.0 inch (168 x 35 x 50 mm)
10-point models feature:
10 x #8-32 stainless steel screws
2 x 1/4" stainless steel terminal post
Max Continuous Amperage: 150 amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with covers): 7.2 x 1.9 x 1.7 inch (182 x 48 x 43 mm)
Includes large cover with retainers
12-point models feature:
12 x #8-32 stainless steel screws
1 x 1/4" stainless steel terminal post
Max Continuous Amperage: 180 Amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with cover): 5.5 x 1.4 x 1.2 inch (140 x 35 x 30 mm)
Includes terminal insulator for large stud and cover for screws
Dual-bus models feature:
Similar to 4-post models, with two bars on one base
Bars available with combinations of 5/16" or 3/8" posts
Center divider to separate positive and negative connections
Mounting center: 5.7 inch
Dimensions (with cover): 5.75 x 2 x 3.25 inch (146 x 50 x 82 mm)
7. 6-Way Blade Fuse Box [LED Indicator for Blown Fuse] [Protection Cover] [100 Amp] - Fuse Block for Automotive
Feature
LED INDICATOR FOR BLOWN FUSE - Easily identify & replace blown fuses immediately without guessing! The LED indicator lights up when a blown fuse is detected.FUSE PROTECTION COVER - A neat clip-on plastic cover that adds extra protection to your fuse box & fuses.
100 AMP RATING - Maximum of 30 Amp per circuit & 100 Amp per panel.
HEAVY DUTY CONSTRUCTION - This fuse panel has a #10-32 stud for power feed, .250" male quick disconnect terminals, and can take an input voltage of 10 - 32 V DC.
User Manual available for download under Product Information Details; Search for "Online LED Store Fuse Box" on YouTube for How To Video.
Description
This 6 way ATC/ATO blade fuse holder box is compact, yet rugged in construction. LED illuminated, the red LED indicator light allows you to quickly diagnose which of the fuse has "popped". This fuse panel has a #10-32 stud for power feed, .250" male quick disconnect terminals, can take an input voltage of 10 - 32 V DC, can handle a maximum of 30 Amp per circuit with a maximum of 100 Amp per panel, and has a cover for additional protection.
Interchangeable/Compatible with:
All automobiles and devices equipped with a 10-32 Volt DC power source.
Features:
- High quality construction.
- Red LED illuminates when fuse is blown.
- Maximum of 30 Amp per circuit and 100 Amp per panel
- Clear cover included for additional protection.
Product Content:
- 1 x Fuse Box with Cover
1 Year Manufacturer Warranty
Have a Question? Call Us Toll Free 1-855-LED-ONLINE (1-855-533-6654)
8. Bay Marine Supply BusBar 12-Point Power Distribution Block #8 Terminal Screws & 1/4 Stud Pair of Black & Red
Feature
Available in 4 sizes, all with covers. Made in the USA of nickel plated brass bars, stainless steel hardware, and glass-filled nylon for strong, corrosion-free service.4-post models available in 5/16" or 3/8" posts, with 3 additional #8 screws for small attachments. Rated at 250 amps at 12VDC, maximum 48VDC.
10-point terminal strips have #8 screws and two 1/4" post for the primary connection, protected by a durable cover with retainers. Rated at 150 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
12-point terminal strips have #8 screws and a single 1/4" post for the primary connection, protected by a durable rubber cap. Rated at 180 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
Dual-post models have two separate bars separated by a full-lengh divider to handle both positive and negative connections on a compact footprint. Available with 5/16" or 3/8" posts. Rated at 250 amps per bar at 12VDC, maximum 48VDC.
Description
All models feature:Made in the USA
Available in black or red (except dual row models)
Nickel plated brass contact plate for low resistance and protection against corrosion
Stainless steel screws, hex nuts, and washers
Base material is glass-filled nylon
When used with appropriate insulators and shrink tube, meets USCG 33 CFR Subpart I, SAE J2120 8.5 & ABYC E-9.4 H.
4-post models feature:
Available with 5/16" or 3/8" posts
Max amperage: 250 Amps at 12VDC
Max voltage: 48VDC
3 additional #8-32 screws for small connections
Mounting screws: #10 (not included)
Mounting center: 5.7 inch
Dimensions (with cover): 6.6 x 1.4 x 2.0 inch (168 x 35 x 50 mm)
10-point models feature:
10 x #8-32 stainless steel screws
2 x 1/4" stainless steel terminal post
Max Continuous Amperage: 150 amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with covers): 7.2 x 1.9 x 1.7 inch (182 x 48 x 43 mm)
Includes large cover with retainers
12-point models feature:
12 x #8-32 stainless steel screws
1 x 1/4" stainless steel terminal post
Max Continuous Amperage: 180 Amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with cover): 5.5 x 1.4 x 1.2 inch (140 x 35 x 30 mm)
Includes terminal insulator for large stud and cover for screws
Dual-bus models feature:
Similar to 4-post models, with two bars on one base
Bars available with combinations of 5/16" or 3/8" posts
Center divider to separate positive and negative connections
Mounting center: 5.7 inch
Dimensions (with cover): 5.75 x 2 x 3.25 inch (146 x 50 x 82 mm)
9. Bay Marine Supply BusBar 4-Post Power Distribution Block 3/8 Red
Feature
Available in 4 sizes, all with covers. Made in the USA of nickel plated brass bars, stainless steel hardware, and glass-filled nylon for strong, corrosion-free service.4-post models available in 5/16" or 3/8" posts, with 3 additional #8 screws for small attachments. Rated at 250 amps at 12VDC, maximum 48VDC.
10-point terminal strips have #8 screws and two 1/4" post for the primary connection, protected by a durable cover with retainers. Rated at 150 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
12-point terminal strips have #8 screws and a single 1/4" post for the primary connection, protected by a durable rubber cap. Rated at 180 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
Dual-post models have two separate bars separated by a full-lengh divider to handle both positive and negative connections on a compact footprint. Available with 5/16" or 3/8" posts. Rated at 250 amps per bar at 12VDC, maximum 48VDC.
Description
All models feature:Made in the USA
Available in black or red (except dual row models)
Nickel plated brass contact plate for low resistance and protection against corrosion
Stainless steel screws, hex nuts, and washers
Base material is glass-filled nylon
When used with appropriate insulators and shrink tube, meets USCG 33 CFR Subpart I, SAE J2120 8.5 & ABYC E-9.4 H.
4-post models feature:
Available with 5/16" or 3/8" posts
Max amperage: 250 Amps at 12VDC
Max voltage: 48VDC
3 additional #8-32 screws for small connections
Mounting screws: #10 (not included)
Mounting center: 5.7 inch
Dimensions (with cover): 6.6 x 1.4 x 2.0 inch (168 x 35 x 50 mm)
10-point models feature:
10 x #8-32 stainless steel screws
2 x 1/4" stainless steel terminal post
Max Continuous Amperage: 150 amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with covers): 7.2 x 1.9 x 1.7 inch (182 x 48 x 43 mm)
Includes large cover with retainers
12-point models feature:
12 x #8-32 stainless steel screws
1 x 1/4" stainless steel terminal post
Max Continuous Amperage: 180 Amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with cover): 5.5 x 1.4 x 1.2 inch (140 x 35 x 30 mm)
Includes terminal insulator for large stud and cover for screws
Dual-bus models feature:
Similar to 4-post models, with two bars on one base
Bars available with combinations of 5/16" or 3/8" posts
Center divider to separate positive and negative connections
Mounting center: 5.7 inch
Dimensions (with cover): 5.75 x 2 x 3.25 inch (146 x 50 x 82 mm)
10. Bay Marine Supply Busbar 12-Point Power Distribution Block (240A Rating) #8 Terminal Screws & 1/4" Stud Black Bus Bar
Feature
Available in 4 sizes, all with covers. Made in the USA of nickel plated brass bars, stainless steel hardware, and glass-filled nylon for strong, corrosion-free service.4-post models available in 5/16" or 3/8" posts, with 3 additional #8 screws for small attachments. Rated at 250 amps at 12VDC, maximum 48VDC.
10-point terminal strips have #8 screws and two 1/4" post for the primary connection, protected by a durable cover with retainers. Rated at 150 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
12-point terminal strips have #8 screws and a single 1/4" post for the primary connection, protected by a durable rubber cap. Rated at 180 Amps at 12VDC (15 Amps per connection), maximum 48VDC.
Dual-post models have two separate bars separated by a full-lengh divider to handle both positive and negative connections on a compact footprint. Available with 5/16" or 3/8" posts. Rated at 250 amps per bar at 12VDC, maximum 48VDC.
Description
All models feature:Made in the USA
Available in black or red (except dual row models)
Nickel plated brass contact plate for low resistance and protection against corrosion
Stainless steel screws, hex nuts, and washers
Base material is glass-filled nylon
When used with appropriate insulators and shrink tube, meets USCG 33 CFR Subpart I, SAE J2120 8.5 & ABYC E-9.4 H.
4-post models feature:
Available with 5/16" or 3/8" posts
Max amperage: 250 Amps at 12VDC
Max voltage: 48VDC
3 additional #8-32 screws for small connections
Mounting screws: #10 (not included)
Mounting center: 5.7 inch
Dimensions (with cover): 6.6 x 1.4 x 2.0 inch (168 x 35 x 50 mm)
10-point models feature:
10 x #8-32 stainless steel screws
2 x 1/4" stainless steel terminal post
Max Continuous Amperage: 150 amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with covers): 7.2 x 1.9 x 1.7 inch (182 x 48 x 43 mm)
Includes large cover with retainers
12-point models feature:
12 x #8-32 stainless steel screws
1 x 1/4" stainless steel terminal post
Max Continuous Amperage: 180 Amps at 12VDC - 15 Amps per connection at 12VDC
Max Intermittent Amperage: 20 Amps per connection (less than 1 minute)
Max Voltage: 48VDC
Mounting screws: #10 (not included)
Dimensions (with cover): 5.5 x 1.4 x 1.2 inch (140 x 35 x 30 mm)
Includes terminal insulator for large stud and cover for screws
Dual-bus models feature:
Similar to 4-post models, with two bars on one base
Bars available with combinations of 5/16" or 3/8" posts
Center divider to separate positive and negative connections
Mounting center: 5.7 inch
Dimensions (with cover): 5.75 x 2 x 3.25 inch (146 x 50 x 82 mm)
Recent Comments