Top 10 motion z-wave for 2019
If you looking for motion z-wave then you are right place. We are searching for the best motion z-wave on the market and analyze these products to provide you the best choice.
Best motion z-wave
1. GE Z-Wave Plus Smart Control Dimmer Switch, Wall, White & Light Almond Paddles, Repeater/Range Extender, Zwave Hub Required-Works with SmartThings Wink & Alexa, 14294
Feature
"ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus).Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately).
Wirelessly schedule, control and adjust the brightness of any dimmable wall or ceiling light - control from anywhere, at any time with any mobile device.
For use with dimmable LED, CFL, incandescent and halogen bulbs. Full-range dimmability: cuts energy costs and extends bulb life.
Requires in-wall installation with hard-wired connections - Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included).
NOTE: Refer User Manual on Technical Specification before use
Description
Transform any home into a smart home with the GE Z-Wave Plus In-Wall 500S Smart Dimmer. You can create custom scenes and schedule timed events either when you're at home or when you're away. It provides ultimate flexibility for your home lighting and can be used in single or multi-switch applications.2. Z-wave Plus Motion Detector, Easy to install with PET Immunity, White (PIRZWAVE2.5-ECO)
Feature
Premium components provides accurate and instant motion detection in both Automation mode and security modeOvercomes potential interference of pets as large as 55 lbs, saving nuisance false alarms.
Easy installs with included flush mount and corner mount wall brackets and begins to learn as Soon as batteries power it up.
Five Year battery Life and discrete design keep it out of sight and out of mind when not on alert.
Natively compatible with SmartThings, it works with most brands of Z-wave home security hubs like Vera Plus, Vera Edge, Vera Lite, HomeSeer, D-link staples connect and Piper NV. If your brand is not listed, (e.g. Wink or Alarm.com based security panels) compatibility cannot be guaranteed.
Description
From the leaders in Z-wave plus technology, the Ecolink Motion Detector allows you to improve the safety and security of your home and family easily and effectively. Built with premium components for better performance, these motion sensors provide instant and reliable performance as part of your security system. Ecolink is a leading developer of low power, highly reliable wireless solutions, including a wide range of intelligent wireless security, sensing and home automation devices. Dimensions: 3.5L x 2.3W x 1.8H.3. Dome Home Automation Motion Detector Z-Wave - Light Sensor - Magnetic Mount, White (DMMS1)
Feature
PERFECT FOR HOME SECURITY SYSTEMS - Z-Wave Plus Certified and compatible with Z-Wave Hubs, to seamlessly integrate with Wink, SmartThings, Home Seer, Nexia, and other hubsSENSES MOTION AND AMBIENT LIGHT - Senses current lighting conditions and helps create smart lighting scenes that optimize your personal safety and home security
110-DEGREE MOTION DETECTION FOR ALARM - Detects movement with extra-wide 110-degree coverage and responds by sending an alert to your smart home alarm system
BATTERY-POWERED TO INSTALL ALMOST ANYWHERE - Magnetic mount and battery operation (3-year battery life) for flexible installation in nearly any area of your home
ADJUSTABLE SENSITIVITY - Don't send your neighbors into a panic every time Rover and Spot enter a room
Description
Dome Z-Wave Motion Detector Dome now officially Works with Wink! Your home security system just got bumped up a notch. If anyone is moving along where they shouldn't be, you'll know about it. Lights will go on and sirens will blare--should you choose, or maybe just a notification to your smartphone will be enough, but you get the picture. With the Dome Home Automation Motion Detector you can program your Z-Wave hub to light the way when you enter a room, automatically turn on only the lights you want to, and turn them off when you leave. Built-in ambient light sensors dim lights to their perfect brightness Set it up to monitor your windows and doors, illuminate a hallway, or measure light levels so you're not wasting resources. It's like a camera, laser, and assistant in one, but cheaper and less intrusive. Use with most any Z-Wave Hub including: Wink, Home Seer, SmartThings, Vera, Harmony and more. Three-Year Battery Life and up to 150 foot range. Ambient light detection and advance configuration settings may not be available through all smart Hubs. Visit Dome's How-to page for more information4. Zooz 700 Series Z-Wave Plus 4-in-1 Sensor ZSE40 (Motion / Light / Temperature / Humidity)
Feature
4 SMART SENSORS IN 1: This compact device detects and reports motion, temperature, humidity, and light level to your smart home app. Compatible Z-Wave hub required, sold separately.NEW IMPROVED VERSION: The included CR123A battery makes the sensor lasts much longer than the previous version. Updated motion detection allows you to get even quicker activity reports.
CUSTOMIZE IT: Choose from 7 levels of motion sensitivity, adjust the motion re-trigger interval, and pick from 4 different LED indicator modes (your hub needs to support advanced parameter input).
SECURITY FIRST: This sensor is equipped with bank-grade AES signal encryption. It's Z-Wave Plus certified to ensure it complies with the highest industry standards.
WILL IT WORK WITH MY HUB? This sensor is NOT supported by Wink, Vivint, ADT Pulse, Qolsys, or other Z-Wave alarm panels. It will work great with open systems like Almond (Securify), HomeSeer, Home Assistant, Hubitat, SmartThings Hub with custom device handler (contact seller for instructions), VeraEdge, VeraLite (running under UI7), and VeraPlus.
Description
- NOTE: This sensor is supported by open Z-Wave systems ONLY. It will not work with Wink or Z-Wave alarm panels.
- Model Number: ZSE40 VER. 2.0
- Z-Wave Signal Frequency: 908.42 MHz
- Power: 1 CR123A battery (included)
- Z-Wave Range: Up to 100 feet line of sight
- Operating Temperature: 5-104 F
- Installation and Use: Indoor only
- Dimensions: 2.25" x 2.25" x 1"
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
- Model Number: ZSE29
- Z-Wave Signal Frequency: 908.42 MHz
- 3 x AA (1.5 V) batteries (included) / Micro USB (cable + adapter sold separately)
- Motion Detection: up to 30 feet
- Z-Wave Range: Up to 100 feet in open space
- Operating Temperature: -4-104 F
- Installation and Use: Indoor / Outdoor
- Fibaro Home Center Lite
- SmartThings
- VeraPlus
Please contact seller if you're not sure your hub is compatible.
- SPECIFICATIONS:
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to get readings from this sensor from Alexa.
Alexa-compatible Z-Wave hubs include:
5. BeSense ZWave Ceiling PIR Motion Detector - Works Natively with Samsung SmartThings Hub
Feature
360 Degree Occupancy Sensor - Motion detector Optimized for SmartThings HUBHEIGHT REQUIRED: The recommended height to get a good detection range is 8 feet. If the space does not allow for that height, the best option for your project is the BeSense Wall Sensor.
Zwave Plus , Anti-tamper alarm, Real- time Battery power level monitoring, Lower consumption (2 years battery working life)
Pet forgiveness allows for three different modes controlled by internal jumper.
Easy set up, 2) AA batteries included. The batteries can be replaced
Description
An attractive, economical and easy to install sensor that senses in all directions (360 degrees), Zwave Plus andSuperior ability to detect & prevent false positives. Low battery consumption. Benefits: 360 degrees coverage Anti-tamper alarm Real- time Battery power level monitoring. Maximize your energy-savingswhen you automate the ON/OFF switching of your lights. They will let you know if someone is walking around where they shouldn't be, or they can automagically turn lights on when you enter the room6. GE Z-Wave Plus Wireless Smart Sensor, Motion Only, Portable, White, for Scene Activation and Remote Monitoring, 34193
Feature
Requires a Z-Wave certified gateway - Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, Nexia, Trane and Iris.Wirelessly activate scenes or lights and send alerts to your smartphone or tablet whenever motion is detected.
Sensor sits perfectly on a shelf, table counter or desk, and can be mounted to a wall or ceiling using the included mounting hardware - can be placed up to 150 feet from the Z-Wave hub or closest Z-Wave device
Covers an 180 degree range and can detect motion from up to 45 feet away - three (3) adjustable motion sensitivity levels for small or large rooms/areas ( low / medium / high )
Two Power Options - Powered wirelessly by two (2) CR123A batteries (included) for a battery life of up to 2 years or can be powered via micro USB cable and power adapter (cable and adapter sold separately) recommended for high-traffic areas like entry-ways, common rooms, and hallways
Description
Make the move toward convenience with the GE Battery-Operated USB Power Tabletop Motion Sensor with Wall Mount for your home. It sits perfectly on a shelf, table, counter or desk, and can also be mounted to wall or ceiling. Once you decide on the best sensor placement for your home, you may choose to power the sensor using the included batteries for a cordless installation or use a separate micro USB cable and AC power adapter. Never worry about changing batteries again.7. GE Z-Wave Plus Smart Lighting Control Motion Sensor Switch, On/Off, In-Wall, Vacancy / Occupancy Sensor, White & Light Almond Buttons, Zwave Hub Required- Works with SmartThings Wink & Alexa, 26931
Feature
ALEXA COMPATIBLE - REQUIRES AN ALEXA SUPPORTED HUB for voice control with Echo Products (Alexa device and hub sold separately). CANNOT connect directly with ECHO PLUS (Only ZigBee products can connect directly to Echo Plus)Requires a Z-Wave certified gateway. Compatible with the following Z-Wave certified Hubs: SmartThings, Wink, ADT Pulse, Trane, Vivint, Nexia, Honeywell, HomeSeer, Harmony Home Hub Extender, Vera, Connect and Iris. Works with Alexa for voice control (hub required; Alexa device and hub sold separately)
Wirelessly trigger scenes and send alerts when motion detection has turned lights on or off. Remotely monitor with any mobile device (Requires Z-Wave gateway or controller)
Multiple Operation Modes: Occupancy - auto ON/auto OFF, Vacancy - manual ON/auto OFF, Manual - manual ON/OFF. 3 Sensitivity Levels - low, medium, high
Requires in-wall installation with hard-wired connections - Neutral wire REQUIRED. Includes white and light almond paddles (wall plate not included)
Description
Set your life in motion with the Z-Wave plus in-wall smart motion switch. This energy-efficient sensor works with your homes gateway to wirelessly trigger scenes and send alerts to your smartphone or tablet whenever motion is has turned lights on or off.* three different modes offer the best lighting option for you: occupancy, vacancy and manual. In occupancy mode, the lights will automatically turn on when you enter the room and automatically turn off Once youve left (customizable between 5 seconds and 30 minutes). in vacancy mode, the lights are turned on manually and will turn off automatically after a preset amount of time. In manual mode, the lights will function as a normal light switch and manually turn on and off. Along with conveniently saving you time and energy costs, the smart motion switch can replace any existing light switch in your home, and can be used in 3- and 4-way applications. You may also coordinate the switch with your household decor with the included white and light almond buttons. Experience the comfort of automation in your life when you come home to the Z-Wave plus in wall smart motion switch. *Functions may vary depending on gateway or controller.8. Zooz Z-Wave Plus S2 Outdoor Motion Sensor ZSE29
Feature
OUTDOOR SENSOR: Introducing the first Z-Wave motion detector created for outdoor use. Monitor activity remotely through your Z-Wave hub (required, sold separately) and automate outdoor lighting based on motion.EASY TO INSTALL: Add it to your system quickly through auto-inclusion and mount it in minutes with just a couple of screws. Power it with batteries (included) or micro USB (cable + adapter sold separately). Program motion time-out and light level trigger by turning the knobs right on the sensor. No advanced settings available (there's only one sensitivity level for a solid 30-foot detection range).
COMPATIBILITY: The sensor works great on HomeSeer, Hubitat, Fibaro, and Vera. Custom device handler needed for SmartThings (go to Zooz support portal or contact seller for instructions). Does NOT work with Wink, Ring, ADT, or other Z-Wave alarm panels. Alexa is NOT a Z-Wave hub (the sensor won't work directly with Echo).
SECURITY: Equipped with the latest authenticated S2 security protocol for encrypted signal and hacker-proof smart home (NOTE: your Z-Wave hub needs to support S2 for this feature to work). Tamper protection and low battery alerts for your peace of mind.
SUPPORT: Questions or issues? Zooz has fast and responsive US-based support to help you with set-up, functionality, and automation routines. Just ask!
Description
- NOTE: This device is supported by open Z-Wave systems ONLY. It will not work with Wink or Z-Wave alarm panels.
Please contact seller if you're not sure your hub is compatible.
- SPECIFICATIONS:
Will it work with Alexa?
Amazon Echo is not a Z-Wave controller so you will need a compatible Z-Wave hub to get readings from this device on Alexa.
Alexa-compatible Z-Wave hubs include:
9. Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
Feature
6-in-1 Z-Wave Plus MultiSensor: motion, humidity, temperature, light lux, UV, vibration sensor.2 year battery life
Super-small at 1.8 inches. Can be installed in corner, in-wall, on shelf or in downlight.
Works with certified Z-Wave gateways and tested with Fibaro, Indigo 7, openHAB, SmartThings, Vera.
Z-Wave Plus certified. Certification number: ZC10-15070011
Description
MultiSensor 6 is the foundation of a modern smart home. Its perfectly small exterior hosts the technology for real-time intelligence. Designed and calibrated to be as accurate as it can be, MultiSensor 6s accuracy varies as little as 0.2%. The device measures ultraviolet light and can protect your family's health and your furniture from bleaching. With the newly added vibration sensor, MultiSensor 6 makes your environment secure like never before. MultiSensor 6 is a part of Aeotec Gen5 range of Z-Wave products. That means that it outperforms all that has come before it. Its built around the latest Z-Wave 500 series chip and firmware, providing a 50% greater wireless range and a 250% faster communication speed over previous Z-Wave products. It has AES 128 bit security encryption built right in. You need a Z-Wave gateway which operates with the 500 series chip products to take full advantage of the device. Please consult the manufacturer of your Z-Wave hub to make sure it supports all MultiSensor 6 features. SPECIFICATIONS: Motion Sensor : 16 feet, and 120 field of view; Humidity Sensor : 20% to 95%, accuracy:+/- 5% at 77F; Temperature Sensor : 14F (-10C) ~ 140F (60C), accuracy: +/- 32.9F (0.5C); Light Sensor : 0 lux to 1000 lux; Vibration Sensor : acts as tamper switch, ON or OFF; Operation Temperature (Top): -4F (-20C) ~ 140F (40C); Storing Temperature: -40F (-40C) ~ 176F (80C); Working Humidity: 8% ~ 80%; Operational site: Indoor and outdoor; Power: DC 5V 500mA or 2 x CR123A battery; Weight: 2.6 oz10. HomeSeer HS-FLS100+ Z-Wave Plus Floodlight Sensor
Feature
CONVENTIONAL FLOODLIGHT MODE: HS-FLS100+ can be used as a conventional motion-activated floodlight sensor to power floodlights when motion is sensed during dark hours. Controls are provided for manual adjustment of LUX sensitivity and floodlight ON times. WARNING - This sensor module is designed to replace CONVENTIONAL 120 VAC sensor modules. It is NOT COMPATIBLE with LOW VOLTAGE integrated LED fixtures.SMART FLOODLIGHT MODE: When added to a smart home system, HS-FLS100+ will send Z-Wave commands to the smart hub or home controller when motion is sensed and when the LUX level changes. Likewise, the smart hub or home controller can send Z-Wave commands back to the HS-FLS100+ to turn floodlights ON and OFF. This added functionality provides a very high level of flexibility not typically available in conventional motion-activated floodlights.
SMART SENSOR MODE: HS-FLS100+ can be installed and used simply as an outdoor motion and LUX sensor. Floodlight functionality is not required. This provides some interesting security and smart home possibilities.
CONTROLS OTHER HOME LIGHTING: Can be used to turn on interior lights when it gets dark outside | More accurate than typical SUNSET calculations (requires smart home controller or hub).
COMPATIBLE WITH HOMESEER & SMARTTHINGS: Requires latest HomeSeer Z-Wave driver ("plug-in") or SmartThings device handler (available from HomeSeer website).
Recent Comments