Top 10 recommendation co2 laser for 2019
When you looking for co2 laser, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable co2 laser is not an easy task. In this post, we show you how to find the right co2 laser along with our top-rated reviews. Please check out our suggestions to find the best co2 laser for you.
Best co2 laser
1. Orion Motor Tech 60W CO2 Laser Engraver Cutter Cutting Engraving Machine 20" x 28" with USB Port
Feature
60W laser tube pre-installed. Large working area: 20'' x 28''. Machine dimensions: 47.2" x 36.6" x 34.3"Suitable to work on wood, bamboo, Plexiglas, crystal, leather, rubber, marble, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more non-metal materials. Engraving Speed: 0-500 mm/s. Cutting Speed: 0-80 mm/s
Visible red dot pointer for better guidance. Higher resolution standard optics, no additional expensive lens packages needed. 💗 ATTENTION: You have to leave your phone number when you order this item so that we can arrange the delivery for you !!! And please let us know if you need a lift gate service if you order this item !!
RDworks/Corelaser software (included) controls this laser's settings from a wide range of software packages - from design programs to spreadsheet applications to CAD drawing
Air compressor directs a constant stream of air to remove heat and combustible gases from the work area
Description
Notes- Make sure the pictures are of high resolution if you are to use JPG pictures, or the patterns to be engraved might be vague.
- Use vector grams done by AI or CorelDraw to engrave for ultimate results.
- The quality of patterns to be engraved depends on a lot of factors: engraving speed (adjustable), laser power, current amperage etc., all of which should be set correctly according to the manual provided.
- It is fully compatible with CorelDraw and AutoCAD, but CorelDraw and AutoCAD are NOT included.
- Laser: CO2 laser source, 60W
- Engraving Materials: Wood, cork, veneer, rubber, jade, acrylic, plastic, glass, fiberglass, marble, corian, leather, fabric, cloth, coated metals, anodized aluminum, ceramics, tile, mylar, delrin, melamine, paper, pressboard, matte board and more NON-metal surfaces.
- Cutting Materials: Wood, acrylic, plastic, corian, delrin, cloth, leather, melamine, paper, pressboard, matte board, mylar, rubber, veneer, cork and more NON-metal surfaces.
Specifics:
Working size: 20" x 28" (500 x 700 mm) (with double side open door)
Up and down work plate: 8"200mm
Software environment: Windows 2000/7/8/XP/10
Carving speed: 1000 mm/s (different materials differ)
Maximum cutting depth: 5mm for acrylic, wood; 4mm for harder materials
Maximum engraving depth: 3-4mm for acrylic, wood; 2-3mm for harder material
Positioning Accuracy: 0.01 mm
Supporting Figure Format: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI
Supporting Software: CorelDraw or AutoCAD
Color Separation: any RGB color
Item Size: 3.8'x3.2'x2.8'
Item weight: 276 lbs
Package includes:
1 60W CO2 Laser Engraver
1 Exhaust Fan
1 Venting Tube
1 Water Pump
1 USB Key & USB Cable
1 Software
1 Manual
2. TEN-HIGH AC110V glass laser tube 40W CO2 700mm length, 50mm Dia for laser engraving and cutting machine
Feature
Power: 40 Watt, Length: 700mm, Diameter: 50mm. This CO2 Laser Tube has an inlet and outlet for water cooling and wire connections for the anode and cathode sides of the tube. For ease of installation, the high voltage port and low voltage port have been connected in advance.Professional water cooling and hermetic CO2 glass laser tube, mainly used for laser engraving machine, laser marking machine, laser engraving machine, laser cutting machine, is Replacement parts for laser machine, and can be carved and cut acrylic, cloth, leather, bamboo, wood, engraving, etc. It is excellent in laser spot mode, has strong laser energy, and a long service life.
Each tube is tested for quality before it is sent out, with a voltage test performed and a read-out of performance at different wattages. It is important to note that while you may achieve higher performance at higher wattage, it can also shorten the life of the tube. Laser tubes are consumable products much like light bulbs are. They have a rated life span. The 40W tube's lifespan is rated at 1500H-2500H(under normal use).
The laser tube after generally work 3-4 hours should to pause for about 30 minutes, This laser tube should be used and placed under the normal room temperature in the cold weather (To prevent the cooling water frozen as the weather getting colder). Please make sure your machine has enough installation space, like the diameter and length, all should be a little bigger than laser tube's size.
High quality laser beam. Precise digital control in the process of production. Unique glass metal sealing technology. Here is a video for you to guide the installation: https://youtu.be/mbwYveQZPZ8. Please follow the steps to do the installation in serious.
Description
IntroductionModel:CO2-TUBE-40W-70CM
Output Power:40W
Wavelength:10600nm
Working Voltage:15KV (Trigging Voltage=22KV)
Working Current:15mA
Divergence:1.95(beam diameter)
Dimensions:Length 700mm
Input voltage: AC 220V+30 or AC 110V+20 (to be specified when placing order).
Maximum output voltage:DC25KV (40W;50W) / DC28KV (60W) / DC35KV (80W)
Maximum output current: DC20mA (40W;50W)/ DC23mA (60W) / DC28mA (80W)
Isolation Withstand voltage: Input-output, input-enclosure: AC2000V-10mA-60s; negative pole of output connected to enclosure.
Protection: with well-grounded enclosure, output circuit of power supply can be open for short time (but arc between positive pole and enclosure should be avoided).
Response time (from time of input being available to the output current being up to nominal value)<1ms
TTL voltage level control: effective voltage level can be high or low through setting.
Protection switch: for detection of cooling water, to protect laser device; or activate with enclosure is opened.
Laser power adjustment: (1) by adjusting the output current of power supply through resistor; (2) through PWM control (magnitude being TTL voltage level).
Environmental requirements: temperature (-10 to 40centidegree), relative humidity<85%.
3. TEN-HIGH CO2 engrave machine, 40W 300x400mm Laser Engraving Machine with Exhaust Fan USB port
Feature
Engraving Area: 400x300mm, Suitable for engraving on most organics or NON-metal materials such as acrylic, Plywood, Density board, Leather, Wood, Double color plate, Glass, Cloth, Bamboo, Paper etc.Compatible with WIN7/WIN8/WIN10 system, 32-bit system is the most stable, also suitable for 64-bit. Software: Laser engraving Plug-in CorelLASER & Seal Design Software LaserDRW (included). Compatible with CorelDraw (NOT included).
Equipped with an effective ventilation fan for exhaust smoke, and also has the accessories Exhaust pipe. The cooling water temperature is always displayed, safe and convenient. Build-in Electric Lift-platform, One-button control. Red light positioning system, accurate and efficient.
AIR ASSIST & Safety water valve; A Blowing Flame retardant system is used to prevent burning during engraving working & A water shut off protection valve is installed to protect laser tube for interrupt the laser. The machine's cover equipped with laser suspension protection system, when opening the cover, the laser will stop emitting, safer to operate.
USB INTERFACE-This laser engraving machine has USB Interface. Here is a video for you to guide the installation(the video is 430 engraver for reference, other model's engraver is near the same steps): https://youtu.be/2dfWSJ5o0rU. Please follow the steps to do the installation in serious.
4. SUNCOO 40W CO2 Laser Engraving Machine Desktop Engraver Cutter DIY Arts and Crafts Machine Cutting Glass Wood Leather 12x8in with USB Port for Windows System Only (Red)
Feature
DIY Laser Cutters - co2 40W laser engraver is able to engrave a wide range of materials including plastic, wood, plywood, leather, glass, acrylic, rubber and so on. With the laser beam cutting/engraving technology, the laser engraving machine can create excellent precision artwoks and handicrafts.Higher Technical Volatility - Comes with effective ventilation fan for fumes and smoke extraction which can reduce all electronic component's temperature and lengthen the life of the engraver.
Versatile Machine Supports - It supports any printer and scanner, and is compatible with TIF international standard fonts and BMP/JPG/JPEG/WMF/EMF/PLT. After installing software, you can choose the language you need.
Included CorelDraw - CorelDraw support both Newly Seal and Newly Draw. So it can be used in both carving and cutting.
FDA Certified. Can be updated to 50W as long as you change the laser tube and the power and add an extension cover which is for safety.
Description
This CO2 Laser Engraver Cutter is able to cut through a wide range of materials and deliver excellent precision with laser beam cutting/engraving technology that makes them such a hit in various industries and among DIY lovers. It integrates the newest light, machine and mechanical movement to design this high precise and high speed three generation modal CO2 laser engraver. Equipped with one 40W water cooling laser tube, high precise stepping motors, high quality control board and an USB port can be connected to your laptop or desktop.
1.Applicable Material:Wood,paper,leather,cloth,Plexiglas(cuts rather shallow on normal glass),epoxy resin,density board,double colored board,marble,plastic,rubber,crystal,bamboo and other nonmetal materials. All laser engraving machines can not carve/cut metal or ceramics.
2.Applicable Industry:This machine is suitable to seal engraving,advertisement,art gift,garment,leather,toy,building upholster,computerized embroidery,packing and printing,paper product,garments sampling,large width tailoring,shoemaking,furniture,industry, craftwork, nameplates decorations, woodcut and other industries.
Specification
- GasTube Trigger Volt:20KV,Tube Operating Volt:15KV,Current:0~22mA
- Engraving Area:12x8in,Maximum Item Size to Engrave:10.25W x 8.75L x 2.85H in
- Laser Tube (life hours):1000-1300 Hours,Laser Power:40W
- Engraving Speed:0-13.8 in./s,Cutting Speed:0-1.38 in./s
- Minimum Shaping Character:0.04 X0.04in,Resolution Ratio:0.001in /(1000dpi)
- Power Supply:110V/60Hz for USA,Canada,Japan etc.220V~250V for other countries
- Resetting Positioning:0.0004 in
- Motor Type:Stepper Motor,Software Supported:Corel
- Draw software (both NewlyDraw and NewSeal function)
- Power Consumption:250W
- Operating Temperature:32-113F
- Graphic Format Supported:BMP/JPG/JPEG/WMF/EMF/PLT
- Water Cooling: Water Pump include
- GasTube Trigger Volt:20KV,Tube Operating Volt:15KV,Current:0~22mA
- Engraving Area:12x8in,Maximum Item Size to Engrave:10.25W x 8.75L x 2.85H in
- Laser Tube (life hours):1000-1300 Hours,Laser Power:40W
- Engraving Speed:0-13.8 in./s,Cutting Speed:0-1.38 in./s
- Minimum Shaping Character:0.04 X0.04in,Resolution Ratio:0.001in /(1000dpi)
- Power Supply:110V/60Hz for USA,Canada,Japan etc.220V~250V for other countries
- Resetting Positioning:0.0004 in
- Motor Type:Stepper Motor,Software Supported:Corel
- Draw software (both NewlyDraw and NewSeal function)
- Power Consumption:250W
- Operating Temperature:32-113F
- Graphic Format Supported:BMP/JPG/JPEG/WMF/EMF/PLT
- Water Cooling: Water Pump include
5. CO2 Laser Protection Glasses 9000-11000nm Laser Safety Glasses Goggles
Feature
Laser Safety Eyewear Protection 9000-11000nm O.D 6+ V.L.T 90%Used in 10600nm CO2 Laser protection for Laser Technician
Certification: CE Certified;
Protection Features: All-round Absorption CO2 Laser
Has a 12 month warranty.
Description
9000-10600nm O.D 6+ V.L.T 90% Laser safetry Glasses
Typical laser wavelength10600nm
ApplicationCO2 Laser protection.
Backed 1-year warranty
PACKING LIST
1 * Laser Safety Glasses
1 * Laser Cloth For Cleaing Lens
1 * Black Hard Case
6. SUNCOO 40W CO2 Laser Engraving Machine Engraver Cutter 12x8in with USB Port for Windows System Only (Blue)
Feature
Note: Windows Only. Mac version coming soon. USBporttocomputer,advancedgenerationmodalCO2LASEREngraver,highprecisionsteppingmotormakesengravingmorepreciseReinforced&thickenedmachinebodymaketransportationabsolutelytobesaferandlongerlifespan
Laser cutters are able to cut through a wide range of materials including plastic, wood, plywood, leather, glass, and so on. These cutters deliver excellent precision with laser beam cutting/engraving technology that makes them such a hit in various industries and among DIY lovers.
Builttheheatdispersedfantoreduceallelectroniccomponent'stemperature.Thus,lengthenelectroniccomponent'slifeandthehighertechnicalvolatility.
CorelDrawSoftwareIncluded.CorelDrawhastheabilityofbothNewlySealandNewlyDrawandsoitcanbeemployeedinbothcarvingandcuttingworks.Versatile machinesupportsanykindofmodelprinter,thescanner.BecompatiblewithTIFinternationalstandardfontsandBMP/JPG/JPEG/WMF/EMF/PLT.After installing software ,you can choose lanuage you need .
Description
This CO2 Laser Engraver Cutter are able to cut through a wide range of materials and deliver excellent precision with laser beam cutting/engraving technology that makes them such a hit in various industries and among DIY lovers. It integrates the newest light, machine and mechanical movement to design this high precise and high speed three generation modal CO2 laser engraver. Equipped with one 40W water cooling laser tube, high precise stepping motors, high quality control board and an USB port can be connected to your laptop or desktop.
1.Applicable Material:Wood,paper,leather,cloth,Plexiglas(cuts rather shallow on normal glass),epoxy resin,density board,double colored board,marble,plastic,rubber,crystal,bamboo and other nonmetal materials. All laser engraving machines can not carve/cut metal or ceramics.
2.Applicable Industry:This machine is suitable to seal engraving,advertisement,art gift,garment,leather,toy,building upholster,computerized embroidery,packing and printing,paper product,garments sampling,large width tailoring,shoemaking,furniture,industry, craftwork, nameplates decorations, woodcut and other industries.
Specification
7. Cloudray CO2 Laser Head Whole Set Incl. 2PCS Mirror Mounts, 1 PCS Focus Lens D20mm FL50.8mm and 3 PCS Mirrors D25mm Model A Buy More Discounts
Feature
7 PCS in 1 Set: complete parts for co2 laser head installation and DIY.Application: replacement parts for co2 laser engraving and cutting machine.
CO2 laser focus lens: Made of USA CVD ZnSe Material with diameter: 20mm(0.79") and focal length: 50.8mm(2").
CO2 laser mirror: Made of Silicon material with diameter 25mm (0.98").
CO2 laser head and 2 kinds of mirror mounts (the first and the second) which are made of aluminium with black oxidiation coating.
Description
CO2 Laser Head and Mirror Mounts:
Made of aluminium with black oxidiation coating.
Integrative fixture mount with air assist nozzle.
Match for mirror diameter: 25mm,lens diameter: 20mm andfocal length of lens: 50.8mm
CO2 Laser Focus Lens(Diameter: 20mm Focal Length: 50.8mm)
Material: USA CVD ZnSe
Diameter tolerance: +0/-0.1mm
Wavelength:10.6um
Thickness tolerance: +0/+0.2mm
Transmittance: 99.5%
FL Tolerance: <2%
Clear Aperture: >90%
Surface Figure:
AR/AR coating: R<0.5% per surface
Surface Quality: 40-20scratch and dig
CO2 Laser Mirrors (Diameter: 25mm)
Mateial: Gold-coated Si
Wavelength: 10.6 m
Diameter Tolerance: +0/-0.13 mm
Thickness Tolerance: 0.25 mm
FL Tolerance: < 2%
Centration: < 3 arc minutes
Clear Aperture: > 90%
Surface Figure: < /2 per 1 inch diameter
Surface Quality: 40-20 scratch and dig
AR/AR coating: R < 0.5% per surface
Set APacking List:
1 Set CO2 Laser Head
1 Pcs The first mirror mount
1 Pcs The second mirror mount
1 Pcs USA CVD ZnSe Focus Lens Dia.20mm FL50.8mm
3 Pcs Si Laser Mirror Dia.25mm
8. Mophorn Laser Engraving Machine 130W Co2 Laser Engraving Cutting Machine 55"x35" Laser Engraver Machine with Water Cooling DSP Control System (55"x35" 130W)
Feature
🎃🎄🎃🎄FRONT-REAR DOUBLE DOOR-This engraver machine was produced with double side open door , opening the front and rear sides allows for any length to be engraved and unlimited length design.130W Co2 Glass sealed laser tube ;Resolution: 1000 DPI;Working size: 55"x35"(1400mm x 900mm)🎃🎄🎃🎄SUPPORTS MULTIPLE FORMATS-Driver type: Micro Stepping Motor;Max speed: 1000mm/s;Resolution: 1000 DPI;Image form: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI
🎃🎄🎃🎄DSP CONTROL SYSTEM-It can work with most graphics design programs, such as CorelDraw, AutoCAD, etc. This software allows you to create same shape patterns with different colors
🎃🎄🎃🎄AIR ASSISTED ENGRAVING-This 130W co2 laser engraver is with Air Assist, Remove heat and combustible gases from the cutting surface and make the engraving and cutting projects a breeze
🎃🎄🎃🎄WIDE APPLICATION-The Laser Engraving Machine can be used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble and glass and etc
Description
130w Laser Engraving Machine Red-dot Position Chiller Carving Machine Introduction: This laser engraving machine is equipped with DSP Control System for RDdraw directly,also supports CorelDraw and Auto CAD and other advance software, it is used to engrave on wood, bamboo, plexiglass, crystal, leather, rubber, marble, ceramics and glass and etc. It supports multiple graphic formats, such as HPGL, BMP, GIF, JPG, JPEG, DXF, DST. It features DSP Control System for RDdraw directly,also supports CoreDraw and Auto CAD and other advance software Technical Parameters: Control system: 32 bit DSP Working size: 55"x35"(1400mm x 900mm) with unlimited length design Motorized Up and down work plate: 15.7" (400mm) Laser tube type: Co2 Glass sealed laser tube, water-cooled Laser power: 130W Driving System: 2 phases stepper motor Max speed: 1000mm/s Resolution: 2500 DPI Location precision: 0.01mm Operating temperature: 0-45 Min. shaping character: English 1.0 x 1.0mm;Chinese 2.0x2.0mm PC Interface: USB2.0 and USB Disk Software: Auto Laser Image form: HPGL, BMP, GIF, JPG, JPEG, DXF, DST, AI Machine Dimension (L/W/H): 2040*1460*1070 (mm) N.W.: 400KG Inclusive Accessories: Laser Engraving software Package(English Version) User Manual (CD) Water Pump Air exhaust fan Air Pump Communication cable 3 Reflect optics (installed in the machine) 1 Focus optics (installed in the machine) 1 Laser tube Note: 1. We prefer to delivery item to commercial address; If your delivery address is private residence address, please contact us before you place an order. 2. Please leave us message if your address has loading platform to load your item.9. Cloudray 40W PSU Laser Power Supply 110V/220V for CO2 Laser Engraver Cutter MYJG 40W
Feature
Good compatibility: it can be applicable to 30-40W Laser Tube manufactured by various factories.Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
Easy control: the start and stop of laser can be easily controlled by TTL level.
The power supply has output open circuit protection and a buttonto test to output laser manually.
Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Description
Feature:1. Good compatibility: it can be applicable to 30-40W Laser Tube manufactured by various factories.
2. Quick response speed and effect,high performance,large cutting power,it also can prolong laser tube service life.
3. Easy control: the start and stop of laser can be easily controlled by TTL level.
4. The power supply has output open circuit protection.
5. The power supply has TTL signal indication, water through signal indication and laser output indication.
6. This power supply has the Buttonto test output laser manually.
7. Application: Sculpture and cut acrylic,fabric,double color sheet and rubber etc.
Pin Definition:
*P1:
1--L-: Connect Negative Electrode of Laser Tube.
2--FG: Connect with G Internal, and Connect the Power Supply Shell.
3&4--AC AC: AC 110V/220V Input.
*P2:
1--G Signal Ground:The foot must connected with laser machine's enclosure and ground properly.
2--P Input Signal:Water Protction Switch.
3--L Input Signal:The control of laser: Low Level, emitting laser
4--G Signal Ground : The foot must connected with laser machine's enclosure and ground properly.
5--IN Input Signal :Laser Power supply control terminal can use 0-5V Analog Signal Control,also can use 5V PWM Signal to Control
6--Output Power: 5V,Max output Current 50mA
*P3:
1--24V:output 24V,Max Current 2A,power for master board.
2--G:24V and 5V Ground.
3--5V:output 24V,Max Current 1A.
4--L:The control of laser: Low Level, emitting laser
10. TEN-HIGH Diameter 20mm Focal Lens for CO2 Laser Cutting engraving machine, FL: 2" (2"/50.8mm)
Feature
High Quality ZnSe Material. Excellent Optical Properties. Meniscus (Convex-concave) lens for better quality when engraving.Superb Coating Process: Double-sided Solid Coating. Wiping Resistance. Long Working Life.
High Precision Process: Excellent Substrate. Precision Slicing, Polishing, Grinding Processes. High Temperature, Laser Resistance.
High Transmittance: High Quality Material and Exquisite Coating. Reduce the Loss of Laser. Higher Work Efficiency.
Diameter: 20mm(0.79 inch), Focal length: 50.8mm(2 inches), Thickness: approximate 2.2mm (0.09 inch)
Description
How to Determine Focal Length?The Focal Length is the Distance Between the Focal Lens and the Cutting/Engrave Material.
When install the Lens, Make Sure the Focusing Lens: Convex Face to Laser, Concave Face to Material.
How to Clean Laser Lens and Mirrors?
Step 1 Cleaning for Light Contamination (dust, lint particles)
Use an air bulb to blow off any loose contaminants from the optic surface before proceeding to the cleaning steps.
Step 2 Cleaning for Light Contamination (smudges, fingerprints)
Lay the lens tissue on the optic's surface. Using an eyedropper, squeeze a few drops of acetone onto the lens tissue, wetting the complete optic's diameter. Without lifting the lens tissue, drag the lens tissue across the optic just fast enough so that the liquid evaporates behind the tissue. This should leave no streaks.
Step 3 Cleaning for Moderate Contamination (spittle, oils)
Dampen an unused cotton swab or cotton ball with white distilled vinegar. Using light pressure, wipe the optic's surface with the damp cotton. Wipe excess distilled vinegar with a clean dry cotton swab. Immediately dampen a cotton swab or cotton ball with acetone. Gengly wipe the optic's surface to remove any acetic acid.
Recent Comments