Top 10 recommendation router plate
Finding the best router plate suitable for your needs isnt easy. With hundreds of choices can distract you. Knowing whats bad and whats good can be something of a minefield. In this article, weve done the hard work for you.
Best router plate
1. Kreg Precision Router Table Insert Plate w/Level-Loc Rings (non predrilled)
Feature
38"-thick compression-molded phenolic plate provides a flat plate surface that won't sag9-14" x 11-34" size accommodates large routers easily
Alignment marks on undrilled version provide easy router mounting
Level-Loc reducing rings provide three bit opening sizes of 1", 1-316" and 2-58"
Includes removable brass starting pin, Level-Loc wrench and detailed instructions
Description
This Kreg Table Insert Plate Blank for Routers is made from compression molded phenolic material so it won't sag even under the weight of a heavy router. Designed to use Level-Loc Reducing Rings that install in seconds and lock in place flush every time. They make setup changes simple by allowing you to quickly swap inserts rings for different bit sizes. A blank version comes without predrilled router-mounting holes, and features alignment marks on the underside that make it easy to center and mount any router.2. BOSCH Under-Table Router Base with Above-Table Hex Key RA1165, Silver
Feature
NEW AND IMPROVED: The Bosch RA1165 Under-Table Router Base is the new base for the 1617/1618 series routers, replacing the RA1164ADUSTABLE: The RA1165 conveniently allows depth adjustment of bit height from above the table. The router base is designed for use with 1617, 1617EVS, 1617EVSPK, 1618, 1618EVS routers
MOUNTABLE: The RA1165 base has threaded holes positioned in Bosch's 4-hole subbase pattern and common 3-holes subbase pattern for mounting
CONVENIENT: The wide 3-3/4 base opening allows for the use of larger bits while the quick clamp system allows the motor to be moved with ease for tool-free base changes
Description
Bosch RA1165 Undertable Base for 1617/18 Series Routers (replaces RA1164)Bosch Power Tools and Accessories is one of the divisions within the Robert Bosch Tool Corporation, which is one of the largest power tool and accessory manufacturers in the world. Bosch provides a complete line of corded and cordless power tools and accessories engineered to survive any jobsite and allow professionals to take control of their work.Bosch RA1165 Undertable Base for 1617/18 Series Routers (replaces RA1164) Features: Undertable Router Base with Above-Table Wrench Access Router Attachments, Medium & Large Routers Designed for router table usage Wrench access from above table for convenient depth adjustment Base has threaded holes for mounting to router table positioned in Bosch 4-hole pattern and common 3-hole pattern. Hardware included. Wide 3-3/4 Inch base opening allows use of larger bits Motor housing does not rotate during depth adjustment, eliminating potential cause of horizontal movement of bit Tool-free base change Quick clamp system allows motor to be moved with ease Two additional protective devices prevent motor from falling to floor after quick-clamp is released. Part Number RA1165 Used on Model No. 1617 / 1618 series routers and motors; RA1171, RA1180, RA1181, RA1182, RA1200 Router Tables Sales Pack Quantity 1 Screw Head Size 4-Hole Pattern: 4M, 3-Hole Pattern: 10-24 Category Routers3. Rousseau 3509 9-Inch x 12-Inch x 3/8-Inch Deluxe Router Base Plate
Feature
1/4-by-1/2-inch lipRings snap out to accommodate larger router bits
Snuggers remove excess play
Shoulder pin can be used to start freehand work
Limited lifetime warranty
Description
Able to accommodate the heaviest routers, this thermoset 3/8-inch base plate measures 9 by 12-inches with a 1/4-by-1/2-inch lip, and allows mounting in 3/4-inch tops. Two rings snap out to accommodate larger router bits up to 3-3/4-inches with opening sizes of 1-1/4 (designed to fit template guides), 2-5/8, and 3-7/8-inches. The shoulder pin can be used in any of five locations for ease in starting freehand work.4. POWERTEC 71022 6-1/2-Inch Universal Router Plate
Feature
Predrilled holes are compatible with virtually all the standard routers on the market and accept Porter Cable Style guide bushingsClear acrylic plate assures optimum visibility
Convenient and efficient centering pin for accurate and secure positioning of the plate to your router
Quick and easy to mount
Diameter is 6-1/2-Inch wide
Description
The POWERTEC Universal Router Plate is compatible with virtually all standard routers, with its many predrilled holes. The stellar router plate features a convenient and efficient centering pin that assures accurate and secure positioning of the base plate to your router. Large clear acrylic construction assures you of optimum visibility. Create your products perfectly with POWERTEC.5. Big Horn 18101 9-Inch x 12-Inch Router Table Insert Plate with Guide Pin & Snap Rings
Feature
Hole Opening Sizes:3-7/8" - for large raised panel cutters (plate opening with no rings inserted)
2-5/8" - great for medium size cutters (yellow ring)
1-1/4" - with offset for brass guide bushings or smaller cutters (red ring)
INCLUDES: 1 Plate | 2 Snap Out Rings | 1 Shoulder Pin | 3 Cam Action Adjusters | 1 Allen Wrench | 3 Screws with Star Washers | 4 Magnets
Description
Big Horn 9-Inch x 12-Inch x 3/8-Inch Deluxe Router Base Plate. Inverting your router in a router table allows for safer and more versatile operations. Our deluxe router table insert is made from reinforced high pressure plastic. Large 9" x 12"x 3/8" thick design accommodates heavy routers and features Snap Out Rings for different size opening for various size cutters. The shoulder pin (included) allows for easy free hand work for molding, styles, rails and miters. Also comes with Cam Action Adjusters for snugging the plate to the table and eliminating side to side movement and locking it in place. Threaded Allen wrench inserts in each corner help you level and easily adjust the router insert with your table. Recessed edges along bottom of baseplate allow a nice sturdy fitting. Comes with four magnets for each corner. WARNING: This product can expose you to chemicals which is [are] known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov.6. Kreg PRS5000 Precision Router Lift
Feature
Allows precise above-the-table setup changes for table-mounted routersAbove-table collet access allows fast, easy, above-table bit changes
38" x 9 14" x 11 34" (9.5 mm x 235mm x 298mm) Hard-anodized aluminum plate won't Sag, resists scratches
Fits all Kreg Router tables and many competitive brands
Bearing-guided carriage provides smooth operation
Description
Take control of your table-mounted router for quick, accurate, reliable, and repeatable setupsThe Precision Router Lift helps you elevate your routing capabilities by providing precise control when making router setup changes or changing bits. The lift replaces the standard insert plate in a router table (the 38" x 914" x 1134" plate fits all Kreg router tables plus many popular brands) and accepts any of 20+ popular router modelswithout the need adapters or modificationsin a high-performance carriage that you raise and lower from above the table.
With the Precision Router Lift, theres no more reaching under the table to make adjustments or change bits, plus vastly improved control over all adjustments, large or small. Instead, simply use the lifts included crank to adjust the height of your router bit easily and precisely from above the table. This makes adjustment fast, simple, and accurate so you can set up your router faster, and then dial in the exact bit height you require using the Precision Router Lifts built-in micro-adjustment scale. The lift also simplifies changing bits by allowing you to do that from above the table, as well.
Precision is more than part of the name with this lift, too. The Precision Router Lift is designed so that every full revolution of the adjusting crank moves the carriageand your bitexactly 116", though adjustments down to thousandths of an inch are possible. A built-in micro-adjust scale can be zeroed out at any point to establish your baseline bit setup, so you can make exact bit height changes, and readjust to the exact same setting confidently every time for repeat cuts.
Whether youre upgrading an existing router table, setting up a new one, or even building your own custom table, the Precision Router Lift is the perfect routing accessory. It offers the precision you demand to achieve exacting routing standards, along with the fast, easy performance you want in order to spend less time setting up and more time routing.
7. Kreg Precision Router Table Insert Plate w/Level-Loc Rings predrilled for Bosch & Porter Cable Routers
Feature
38"-thick compression-molded phenolic plate provides a flat plate surface that won't sag9-14" x 11-34" size accommodates large routers easily
Predrilled to precisely mount several routers using the common 3-hole PC-style pattern
Level-Loc reducing rings provide three bit opening sizes of 1", 1-316" and 2-58"
Includes removable brass starting pin, Level-Loc wrench and detailed instructions
Description
This Kreg router table insert plate is made from compression molded phenolic material that won't sag even under the weight of the heaviest of routers. It is designed to use Level-Loc Reducing Rings that install in seconds and lock in place every time. They make setup changes simple by allowing you to quickly swap inserts rings for different bit sizes. The 3-hole plate for PC690/890 will accommodate those same routers from Porter-Cable as well as Bosch 1617 series and DeWalt 616/618 series.8. Router Table Insert Plate, 9.3''x4.7''x 0.3'' Aluminum Router Table Insert Plate with 4 Rings and Screws for Woodworking Benches
Feature
Aluminium Alloy MaterialOur Woodworking Table Insert Plate made of aluminium alloy, it is durable in use and not easy to rustWoodworking Accessories IncludedA set of woodworking bench tools includes 1 router table insert plate, 4 pieces router insert rings and some fixing screws
Easy-to-useConvenient center-hole bushing used to align the router so it is centered in the bit hole. It is easy to use and make the work be well done
Perfet PerformanceWoodworking accessories trimming plate multi-function floor board. Simple step-by-step instructions make accurately drilling and mounting any router easy
Application: Suitable for 62 * 70mm Installing Hole Distance Woodworking Router, such as for M372, 3709/3703MT370, M1P-FF-6/02-6/03-6/04-6, R3-6, wu619, etc
Description
Description:Our Router Table Insert Plate is made of aluminium alloy, durable in use and not easy to rust. Convenient center-hole bushing used to align the router so it is centered in the bit hole. It is easy to use and make the work be well done.
Specification:
Condition: 100% Brand new and high quality
Material: Aluminium alloy plate, plastic rings
Color: As picture shown
Size: Approx. 235mm * 120mm * 8mm/9.3 * 4.7 * 0.3in. Installing Hole Distance: 62 * 70mm / 2.44 * 2.75in
Weight: Approx. 577g
Package Included:
1 * Router Table Insert Plate
4 * Router Insert Rings (in which 1 piece of ring is in the plate)
1 * Pack of Fixing Screws
9. Bosch Parts 2610938414 Adapter Plate
Feature
This is an O.E.M. authorized partFits various Bosch Parts models
OEM Part Number 2610938414
This is a Bosch Parts replacement part
Part Number 2610938414
Description
This is an O.E.M. authorized part. Fits various Bosch Parts models. OEM Part Number 2610938414. Made in United states.10. JessEm Rout-R-Lift II Router Lift For 3-1/2" Diameter Motors, JessEm# 02310
Feature
8.8 pounds ProductDimensions: 9.25 x 11.75 x 10.1 inches
THIS MODEL IS DESIGNED FOR USE WITH PC 690/890, BOSCH 1617/1618, DEWALT 610/618/616, CRAFTSMAN 1754/17540/28190
Recent Comments