Top 7 recommendation betafpv z02 2019
When you looking for betafpv z02, you must consider not only the quality but also price and customer reviews. But among hundreds of product with different price range, choosing suitable betafpv z02 is not an easy task. In this post, we show you how to find the right betafpv z02 along with our top-rated reviews. Please check out our suggestions to find the best betafpv z02 for you.
Best betafpv z02
1. BETAFPV BetaCube F4 FC Frsky Receiver OSD Smart Audio Z02 FPV AIO 5.8G VTX Camera with Cam Mount for Tiny Whoop Quads Beta75S Beta65S
Feature
There are two update points in this newest version Betacube: Z02 FPV camera is upgraded to wire connection way; Added a 25 white camera mount in this cube. Improved flexibility and enhanced the camera's security. You can just plug and play.Binding Procedure--Easier than usual, No need to click the bind button when power on: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only. With this plastic holder you can use it on all the 1S brushed and brushless whoop drone.
The Z02 FPV Camera has wide lens angle of 100 to 120 Degrees with 1/4 lens. Support touch switch select channel Frequency group. Output power of the transmitter is adjustable 25mW to 200mW with the voltage of 2.9V- 5.5V.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV BetaCube F4 FC Frsky Rx Z02 AIO 5.8G VTX Camera Smart Audio for Tiny Whoop Quads Like Beta75S BNF
This is the upgraded version of Betacube. A customed plastic holder is made in this newest version. Soldering is done ahead of time you can use it when received. F4 FC+OSD+ Frsky Rx flight controller with AIO 5.8g newest Z02 VTX camera.
Specification:
CPU: STM32F411CEU6
Six-Axis: MPU6000
ESC: All FETs are rated at 30A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Betaflight MATEKF411RX 3.4.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: SPI Frsky D16 protocol (AKA FRSKY_D on Betaflight Configuration)
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Output power: 0mW, 25mW and 200mW (Adjustable)
Supply Voltage: 2.9-5.5V
Size : 27*17*14 mm
Weight: 4.7g
Antenna: Omnidirectional ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens.
Packagge Included:
1 * BETAFPV F4 brushed flight controller (all connectors soldered)
1 * BETAFPV Z02 AIO camera VTX (all connectors soldered)
1 * 25 Z02 Camera Amount
4 * M1.24mm screws (fit for stock Inductrix frame)
4 * M1.45mm screws (fit for Beta75 etc 75mm frame)
4 * Amti-vibration ruber dampers
2. BETAFPV Beta75X 2S Brushless Whoop Drone with 2S F4 FC Frsky Z02 Camera OSD Smart Audio 11000KV 1103 Motor XT30 Cable for Tiny Whoop FPV Racing
Feature
In the Beta75X BNF setup, when you connect the receiver to 2S FC, don't forget to plug the battery, otherwise the receiver will have no power to work at all. Plus, you may receive the BNF with a 300mAh/350mAh battery, they are just from different batch we made, there is no big difference. Please don't worry.Durable and light frame is customed for the Beta75X. Only 41g give pilots a good weight balance and nice punch on 2S battery, 300mAh 2S HV battery is recommended in default. But pilot could also use their whoop batteries with a replaced power cable. Optional and affordable.
Whole drone no soldering or tinkering necessary. Customed lightest 1103 11000KV motors with cable connectors. Just plug and play. And the camera is the Z02 AIO VTX, spilt and 35 camera mount for more fast flying, smartaudio and output power switchable is also available for VTX remote control.
The Beta75X drone comes with "props out" in default. With reversed props or "props out", so no more dipping even in hardest cornering. More details please check https://betafpv.freshdesk.com/support/solutions/articles/27000050781-know-more-about-props-out-
With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta75X drone like a racing professor.
Description
BETAFPV Beta75X 2S Brushless Whoop Quadcopter Frsky OSD Smartaudio with 1103 11000KV Motor XT30 Cable for FPV Racing Whoop
Here is a introducing video shared by Nate Payne:
https://www.youtube.com/watch?v=JHH17wrMbg0&feature=youtu.be
SPECIFICATION
Weight: 41g (without battery)
Motors: 1103 11000KV with connector
Props: 40mm 4-blades props, 1.5mm shaft hole
Recommend battery: 350mAh 2S battery
Receiver Option: Frsky
FC
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC
Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S lipo
Cotinue current: 6A
Peak current: 10A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Z02 AIO Camera VTX -- On the Beta75X, it is the customed version with VTX board and camera board split.
Smart Audio function is included for radio control
Output power: 0mW, 25mW and 200mW (Adjustable)
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens
Recommend Part:
2S Brushless FC:www.amazon.com/dp/B07H8XQ7R6
300mAh 2S Battery:www.amazon.com/dp/B07H8G5ZPW
1103 Motor:www.amazon.com/dp/B07FN64599
Z02 Cam:www.amazon.com/dp/B07FNRLFGZ
Beta75X Frame Kit: www.amazon.com/dp/B07GYJP8HF
40mm Prop: www.amazon.com/dp/B07H9B2GJH
Package:
1 * Beta75X BNF 2S Whoop Quadcopter
1 * 300mAh 2S 35C-75C battery
1 * Spare 40mm 4-blades props (2CW+2CCW)
1 * Spare Canopy
3. BETAFPV Beta65X 2S Brushless Whoop Drone with 2S F4 FC Frsky Z02 Camera OSD Smart Audio 17500KV 0802 Motor Ph2.0 Cable for Tiny Whoop FPV Racing
Feature
In the Beta65X BNF setup, when you connect the receiver to 2S FC, don't forget to plug the battery, otherwise the receiver will have no power to work at all.Durable and light enough frame is customed for the Beta65X. A total weight of 26g give pilots a good balance of weight and nice punch on HV battery. 2pcs 1S 300mAh Lipo HV batteries are recommended in default. So pilot could also use their whoop batteries.
Whole drone no soldering or tinkering necessary. Customed lightest 0802 17500KV motors with cable connectors. Just plug and play. And the camera is the Z02 AIO VTX, spilt and 35 camera mount for more fast flying, smartaudio and output power switchable is also available for VTX remote control.
The Beta65X drone comes with "props out" in default. With reversed props or "props out", so no more dipping even in hardest cornering. More details please check https://betafpv.freshdesk.com/support/solutions/articles/27000050781-know-more-about-props-out-
With the high performance STM32F405 processor FC boards and tuned Betaflight Ominibus 3.5.0 firmware, everyone could fly the Beta65X drone like a racing professor.
Description
BETAFPV Beta65X 2S Brushless Whoop Quadcopter Frsky OSD Smartaudio with 0802 17500KV Motors for FPV Racing Whoop
Here is a introducing video shared by Daniel Sugano:
https://www.youtube.com/watch?v=faen8NN5GcI&feature=youtu.be
SPECIFICATION
Weight: 26g (without battery)
Motors: 0802 17500KV with connector
Props: 31mm 4-blades props, 1.0mm shaft hole
Camera tilt angle: 35 degree
Receiver Option: Frsky XM / FullSpeed DSMX
Batteries: 260mAh 1S Lipo HV batteries
FC
CPU: STM32F405
Six-Axis: MPU6000
Size: 26mm x 26mm, whoop mounting pattern
Firmware version: Betaflight OMNIBUSF4SD (OBSD) 3.5.0
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Smart Audio port is available for radio control VTX
ESC
Support BLheli/BLHELI_S suite Pass-through ready
Dshot600 in default
Input voltage: 2S lipo
Cotinue current: 6A
Peak current: 10A
Firmware: BLHELI_S
Processor: SILABS EFM8BB21F16G
Z02 AIO Camera VTX -- On the Beta65X, it is the customed version with VTX board and camera board split.
Smart Audio function is included for radio control.
Output power: 0mW, 25mW and 200mW (Adjustable)
Antenna: Dipole ANT
Frequency: 5.8GHz 6 bands 48 channels, with Raceband: 5362~5945MHz
TV System: NTSC
Field of view: 100-120 degrees with 1/4 lens
Recommend Part:
2S Brushless FC: www.amazon.com/dp/B07H8XQ7R6
260mAh Battery: www.amazon.com/dp/B07121V7MB
0802 Motor: www.amazon.com/dp/B07GYR31T8
Z02 Cam: www.amazon.com/dp/B07FNRLFGZ
31mm Prop: www.amazon.com/dp/B07D7WSL3L
Package:
1 * Beta65X BNF 2S Whoop Quadcopter
2 * 300mAh 1S Lipo HV batteries
1 * Spare 31mm 4-blades props (2CW+2CCW)
1 * Spare Canopy
4. BETAFPV Beta65S Whoop Drone 1S Brushed FPV Quadcopter with F4 FC Frsky Receiver Z02 Camera OSD Smart Audio 19000KV 7X16 Motor for Tiny Whoop FPV Racing
Feature
Upgrade with F4 FC brushed SPI Frsky receiver and Z02 FPV camera. The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be set as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver.
More punch on throttle with faster 19000KV 7x16mm motors and 3-blade propellers.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV Beta65S Tiny Whoop Quadcopter with F4 SPI Frsky Receiver OSD Smart Audio Z02 Camera 19000KV 7x16mm Motors for Tiny Whoop Racing3 improvements based on Beta65 drones.
Motors: 6x15mm -> 7x16mm brushed motors
Frsky Receiver:F3 FC -> F4 FC SPI Frsky OSD - The latest BETAFPV F4 brushed FC has upgraded firmware to Betaflight 3.4.1, SPI Frsky D16(Default Configuration) connection works in this F4 flight controller.
Cam: Z01 Cam -> Z02 Cam - This Z02 FPV Camera is customized for Micro FPV quadcopter like Tiny Whoop etc. Support the SmartAudio function and adjustable output power, has wide lens angle of 100 to 120 Degrees with 1/4 lens.
Binding Procedure
The binding procedure is reversed as usual. No need to click the bind button when power on.
Power on the board, either by connecting the battery or USB power. Then the green receiver LED start to flash.
The second step, click the bind button for 3s. Then the green receiver LED will be solid on. This means that the receiver is in bind mode and you could start to bind your radio transmitter.
For detailed procedure of binding, please check the here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
Specification
Wheelbase: 65mm
Weight: 25g (without battery)
Flight Controller: F4 Brushed FC SPI Frsky with OSD-UK: https://www.amazon.co.uk/dp/B07DMDZ1LH
Firmware Version: Betaflight MATEKF411RX 3.4.0
Motor: 7x16mm Coreless Brush Motor, 19000KV
Receiver: Frsky D16 potocol
Camera: Z02 Camera -https://www.amazon.co.uk/dp/B07FNRLFGZ
Batterry: 260mAh Lipo HV battery with PowerWhoop connector
Flight time: 3 minutes 30sseconds
Package Included:
1 * Beta65S BNF Frsky
1 * 260mAh 1S Lipo HV Battery
5. BETAFPV Beta75S Whoop Drone 1S Brushed FPV Quadcopter with F4 FC Frsky Receiver Z02 Camera OSD Smart Audio 8X20 Motor for Tiny Whoop FPV Racing
Feature
The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be set as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
More punch on throttle with 8x20mm motors and 3-blade 40mm propellers. The same hole pattern with Tiny Whoop flight controller.
The Beta75S has 2 improvements based on Beta75 drone: 1.Motors: 7x20mm -> 8x20mm brushed motors. 2.Battery: 260mAh -> 550mAh Lipo HV battery.
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
BETAFPV Beta75S Tiny Whoop Quadcopter F4 FC Frsky Receiver Z02 Camera Upgraded with OSD and Smart Audio for 8X20 Motor4 improvement based on Beta75 drones.
Motors: 7x20mm -> 8x20mm brushed motors
Battery: 260mAh -> 550mAh Lipo HV battery
Frsky Receiver:F3 FC -> F4 FC SPI Frsky OSD - The latest BETAFPV F4 brushed FC has upgraded firmware to Betaflight 3.4.1, SPI Frsky D16(Default Configuration) connection works in this F4 flight controller.
Cam: Z01 Cam -> Z02 Cam - This Z02 FPV Camera is customized for Micro FPV quadcopter like Tiny Whoop etc. Support the SmartAudio function and adjustable output power, has wide lens angle of 100 to 120 Degrees with 1/4 lens.
Binding Procedure
The binding procedure is reversed as usual. No need to click the bind button when power on.
Power on the board, either by connecting the battery or USB power. Then the green receiver LED start to flash.
The second step, click the bind button for 3s. Then the green receiver LED will be solid on. This means that the receiver is in bind mode and you could start to bind your radio transmitter.
For detailed procedure of binding, please check the here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
Specification
Frame: 65mm
Weight: 25g (without battery)
Flight Controller: F4 Brushed FC SPI Frsky with OSD-: https://www.amazon.com/dp/B07DMDZ1LH
Firmware Version: Betaflight MATEKF411RX 3.4.0
Motor: 8x20mm coreless brushed motor, 14000KV
Receiver: Frsky D16 potocol
Camera: Z02 Camera -https://www.amazon.co.uk/dp/B07FNRLFGZ
Batterry: 550mAh Lipo HV battery with PowerWhoop connector
Flight time: 5 minutes
Package Included:
1 * Beta75S BNF Frsky
1 * 550mAh 1S Lipo HV Battery
6. BETAFPV Beta85 Micro Drone 1S Brushed FPV Quadcopter with F4 FC Frsky Receiver Z02 Camera OSD Smart Audio 8.5X20 Motor for Tiny Whoop FPV Racing
Feature
Upgrade with F4 FC brushed SPI Frsky receiver and Z02 FPV camera. The default configuration from factory is Frsky D16 mode (FRSKY_X). Built in Frsky receiver is compatible with Taranis, Taranis Plus, X9E, Horus X12S, XJT Modules. In Betaflight Configuration, it should be setted as FRSKY_D receiver (aka Frsky D8 mode) or FRSKY_X receiver (aka Frsky D16 mode) in SPI RX mode.This is a SPI Frsky receiver. Binding easier than before, no need to click the bind button when power on. Manual: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
F411 Processor can reach to 100MHz, much faster than the F3 Flight Controller with 72Mhz. Integrated with Frsky receiver only.
More punch on throttle with faster 16000KV 8.5x20mm motors and 3-blade propeller
Some basic guidance and typical FAQ, please check it here : https://betafpv.freshdesk.com/support/solutions
Description
Beta85 BNF Micro Whoop Quadcopter OSD Frsky Receiver with 8.5x20 MotorSpecification:
Wheelbase: 85mm
Weight: 43.51g (without battery)
Flight Controller: BETAFPV Brushed FC with OSD
Firmware Version: Betaflight BETAFLIGHTF3 3.2.0
Motor: 8.520mm coreless brushed motor, 16000KV
Receiver: Frsky D8 potocol / DSMX / Flysky Rx with AFHDS 2A protocol
Camera and 5.8G Tx: AIO 520TVL 1/4 Inch Camera 25mW 48CH
Battery: 550mAh Lipo HV battery with PowerWhoop connector
Flight time: 5 mins
Assembly Parts List:
Frame: Beta85 frame
Motors: 8.520mm 16000KV motors
Props: 48mm 3-blade props
FC: BETAFPV F3 V2 FC with OSD
AIO Camera: Z01 Camera
Battery: 550mAh LiHV battery
Package Included:
1 * BNF Beta85 Micro FPV Quad
1 * BETAFPV 550mAh 1S Lipo HV battery
7. BETAFPV F3 FC Brushed Flight Controller SPI Flysky Receiver Integrated Betaflight OSD for Tiny Whoop FPV Micro Racing Drone
Feature
BETAFPV first Flysky FC intergrate BetaFlight OSD, SPI FlySky Rx, BetaFlight firmware, born for acro flight controller for the Micro Whoop or Blade Inductrix quadcopter.Built in SPI Flysky protocol native receiver, compatible with almost ALL Flysky radios(e.g. FS-I6/FS-I6S) or Flysky compatible transmitter like Turnigy Evolution etc.
Bind procedure: Click the bind-button meanwhile powering on the board, but should choose the SPI RX support in the Betaflight GUI and Flysky AFHDS 2A protocol, and the red receiver LED will turn off when in successful connection, more details checking here: https://betafpv.freshdesk.com/support/solutions/articles/27000021366-how-to-bind-your-radio-transmitter-brushed-fc-board
This FC board header pins connector are suitable for the Z02 AIO camera. No cables needed. Just plug and play. https://betafpv.freshdesk.com/support/solutions/articles/27000038661-betaflight-osd-setup
Any request for technical support, please feel free to contact: [email protected]
Description
BETAFPV F3 Brushed Flight Controller Flysky SPI Receiver Integrated Betaflight OSD for FPV Micro Racing Drone
BETAFPV first Flysky FC intergrate BetaFlight OSD, SPI FlySky Rx, BetaFlight firmware, born for acro flight controller for the Micro Whoop or Blade Inductrix quadcopter, compatible with almost ALL Flysky radios(e.g. FS-I6/FS-I6S) or Flysky compatible transmitter like Turnigy Evolution etc.
Binding Procedure--Note: The red receiver LED will turn off when in successful connection.
a. Click the bind-button meanwhile powering on the board, either by connecting the battery or USB power. Then the receiver will enter bind mode, indicated by red receiver LED flashs quickly.
b. Enter the bind status(or what it takes to enter bind status) on the radio. This receiver only support AFHDS 2A mode and does not support AFHDS mode, please turn on this mode in your radio transmitter before use.
Specifications:
Item: F3 Brushed FC Flysky SPI Receiver
CPU: STM32F303
Six-Axis: MPU6000
ESC: All FETs are rated at 6.3A maximum. Support 6x15mm/7x20mm/8x20mm/8.5x20mm etc motors.
Size: 26mm x 26mm,fully compatible with the Inductrix quad frame and mounting pattern
Firmware version: Betaflight CRAZYBEEF3FS
OSD: Built-in BetaFlight OSD (STM32 controls OSD chip over SPI in DMA mode)
Receiver: SPI Flysky AFHDS 2A protocol
Power Cable: 55mm, with JST-PH 2.0 connector, AKA PowerWhoop connector
Weight: 3.7g
Recommend Cam: BETAFPV Z02 -- https://www.amazon.com/dp/B07FNRLFGZ
Package:
1 * F3 OSD brushed flight controller ( 55mm PH-JST 2.0 power cable soldered)
4 * M1.2x4mm screws (Fit for stock Inductrix frame)
4 * M1.4x5mm screws (Fit for Beta75 etc 75mm frame)
4 * Anti-vibration ruber dampers
Recent Comments