Top breadboard elegoo for 2019
If you looking for breadboard elegoo then you are right place. We are searching for the best breadboard elegoo on the market and analyze these products to provide you the best choice.
Best breadboard elegoo
1. REXQualis Electronics Component Fun Kit w/Power Supply Module, Jumper Wire, 830 tie-Points Breadboard, Precision Potentiometer,Resistor for Arduino, Raspberry Pi, STM32
Feature
GREAT ADD-ON TO ARDUINO OR RASPBERRY PI -It's a starter kit that perfect for anybody who wants to start using Arduino or Raspberry Pi.HIGHEST COST COMPONENTS KIT -It comes with more than 500pcs sensors and components for fun and simple electronic projects.
GREAT QUALITY AND BIG BOX PACKING -Resistors/LED/Transistors and Integrated Circuits are individually packaged and labeled, and packing in a plastic box which is bigger enough for you.
The Breadboard Power Supply come with a USB Power Cables,which is hard to find.
Datasheet and Tutorial are available to download from our official website or you can contact our customer service.
Description
This is a great add-on to arduino or raspberry pi, It comes with more than 500pcs sensors and components, all components are carefully bagged, most of them bagged separately, with combined bags pretty logical.The box is large enough, you can easily to repack all the stuff back into the box .We provide more number of resistor(220 ohm 40pcs and other value 20pcs,but other sellers only 10pcs each value), so that you are enough to use, don't need to spend extra money to buy.
The breadboard comes with a power supply, you can set one side for 5VDC, and the other for 3.3VDC. It has a push switch to turn the power on or off.In addition, we also provide a male to male USB Power Cables, this is hard to find,but other sellers do not provide.
Component listing:
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs 830 tie-points Breadboard
1pcs 65 Jumper Wires
140pcs Solderless Jumper Wires
20pcs female to male Dupont Wire
1pcs M-M USB Power Cables
2pcs Pin header (40pin)
1pcs Precision Potentiometer
1pcs IC 4N35
1pcs IC 74HC595
1pcs Active Buzzer
1pcs Passive Buzzer
2pcs Photoresistor
2pcs Thermistor
2pcs RGB LED
10pcs Diode Rectifier (1N4007)
10pcs NPN Transistor (PN2222)
10pcs Button (small)
10pcs 22PF Ceramic Capacitor
10pcs 100NF Ceramic Capacitor
10pcs Electrolytic Capacitor (10UF 50V)
10pcs Electrolytic Capacitor (100UF 50V)
10pcs White LED
10pcs Yellow LED
10pcs Blue LED
10pcs Green LED
10pcs Red LED
20pcs 10 ohm Resistor
20pcs 100 ohm Resistor
40pcs 220 ohm Resistor
20pcs 330 ohm Resistor
20pcs 1k ohm Resistor
20pcs 2k ohm Resistor
20pcs 5k1 ohm Resistor
20pcs 10k ohm Resistor
20pcs 100k ohm Resistor
20pcs 1M ohm Resistor
WARNING:
CHOKING HAZARD-- Small parts. Not for children under 3 yrs.
2. ELEGOO Upgraded Electronics Fun Kit w/Power Supply Module, Jumper Wire, Precision Potentiometer, 830 tie-Points Breadboard for Arduino, STM32
Feature
The highest cost performance kit.With more than 300pcs components.Datasheet is available to download from our official website or you can contact our customer service
Better improvement from our customers' suggestion.
Great quality and packing in a plastic box.
NOT including the controller board.
Description
Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Component listing:
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs 830 tie-points Breadboard
1pcs 65 Jumper Wire
140pcs Solderless Jumper Wire
20pcs Female-to-male Dupont Wire
2pcs Pin header (40pin)
1pcs Precision Potentiometer
2pcs Photoresistor
1pcs Thermistor
5pcs Diode Rectifier (1N4007)
5pcs NPN Transistor (PN2222)
1pcs IC 4N35
1pcs IC 74HC595
1pcs Active Buzzer
1pcs Passive Buzzer
10pcs Button (small)
10pcs 22pf Ceramic Capacitor
10pcs 104 Ceramic Capacitor
5pcs Electrolytic Capacitor (10UF 50V)
5pcs Electrolytic Capacitor (100UF 50V)
10pcs White LED
10pcs Yellow LED
10pcs Blue LED
10pcs Green LED
10pcs Red LED
1pcs RGB LED
10pcs Resistor (10R)
10pcs Resistor (100R)
30pcs Resistor (220R)
10pcs Resistor (330R)
10pcs Resistor (1K)
10pcs Resistor (2K)
10pcs Resistor (5K1)
10pcs Resistor (10K)
10pcs Resistor (100K)
10pcs Resistor (1M)
3. Elegoo EL-CP-003 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks
Feature
630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power railsWhite ABS plastic body with black printed legend. Color legend on distribution strips
With self-adhesive tape on the back, make it easy to stick on the Arduino prototype shield
Packing in a paper box
We have always cared about the customer experience and improve the product function details
Description
We have the manufacture factory,
making productions and selling by ourselves.
So we can control the quality of our productions by ourselves for you.
Wed like to receive your valuable suggestions for our products and make your idea come true.
830 tie points total. 200 in 2 power rails, 630 in a 30 x 10 matrix
White plastic, with black legend. Colored power rails
For wires 21 to 26 AWG
2-sided peelable adhesive tape
Component listing:
3pcs 830 tie-points breadboard
4. Paxcoo 4 Pieces Breadboards Kit with 120 Pieces Jumper Wires for Arduino Proto Shield Circboard Prototyping
Feature
WHAT YOU GET - Package comes with 2 pieces 830-Points large bread boards, 2 pieces 400-Points mini bread boards and 120 pieces jumper wires for use in electronic and electrical experiments projects.HIGH QUALITY EXPERIMENT BREADBORD - The solderless breadboard is made of ABS plastic and can be fixed on a flat surface with adhesive tape at the back. The 830 Points breadboard is about 6.5" x 2.1" x 0.3"in size, and the 400 Points breadboard is about 3.2" x 2.1" x 0.3" in size.
JUMPER WIRES RIBBON CABLES - The multicolored insertion wire is made of high-grade copper core, and is about 8" (20cm) in length. Totally 120 single axis that includes 40 pieces male-male, 40 pieces male-female and 40 pieces female-female.
FITS FOR ARDUINO PROTO SHIELD - The breadboard and jumper wires kit is ideal for setting up a trial circuit, prototype or experimenting.
PRODUCT WARRANTY AND CUSTOMER SERVICE - We provide 48-days money-back and 24-months warranty. Please feel free to contact us if you have any question
Description
Features:
The breadboard and jumper wires kit is ideal for setting up a trial circuit, prototype or experimenting.
Product Description:
Breadboards
- 830 Points breadboard size: 6.5 x 2.1 x 0.3 inch/ 165 x 55 x 8.5 mm
- 400 Points breadboard size: 3.2 x 2.1 x 0.3 inch/ 82 x 55 x 9 mm
- Material: ABS plastic
- Voltage: 5 - 15 V; Current: approx. 1 A
- Breadboard color: White
Jumper Wires:
- Material: High-grade copper core
- Color: 10 assorted colored
- Cable Length: About 8 inch / 20cm
Package included:
- 2pcs 830 points breadboards
- 2pcs 400 points breadboards
- 40pcs male-male jumper wires
- 40pcs man-female jumper wires
- 40pcs female-female jumper wires
Customer Service:
If you have any problem of our product, you can click "seller contact" button in your Amazon account to email us. we would be delighted to help you and we will reply as soon as we can.
Product Warranty:
48 days money-back & 24-month warranty. Any questions you have, please don't hesitate to contact us. If you like our product, click Add to Cart to get it.
5. kuman for Arduino Starter Kits 830 MB-102 Tie Points Solderless Breadboard + 3.3V 5V Power Supply Module + 65pcs Jumper Cables K3
Feature
This Breadboard Prototyping Starter Kit has components you need to start with a good prototyping base for your circuits.his is a common electronics kits of the 830 Points MB102 Breadboard + Power Supply Module 3.3V/5V +65PCS Dupont male to male Breadboard jumper cable wires for Arduino DIY projects programming.
On-board two groups of 3.3V, 5V DC output plug pin Breadboard Power Supply Module
High quality breadboard Compatible. 100% compatible with Arduino UNO R3 MEGA 2560 NANO Arduino kit.
Detailed tutorials including project introduction and source code CAN BE PROVIDED FOR FREE,contact us BY Email to get documents.
Description
Bundle Packing Includes:1 PCS* 830 Tie Point Solderless Breadboard
1 PCS* Breadboard Power Supply Module
65 PCS* Jumper Cable Wires MB102 830 Tie Points Solderless Breadboard + Power Supply Module + 65pcs Jumper cable Kits.
High quality Solderless Breadboard: 830 tie points 2 independent power rail sets in total Adhesive backing Solid construction
Breadboard Power Supply Module: 5v and 3.3v regulator and Off options on each side Standard 2.1mm barrel socket On/Off latching switch USB Port that offers power out and common ground Power indicator LED
65pcs Jumper cable Kits: Male to Male jumper wires; 65 pieces several lengths options; Makes wiring a cinch; Many colors; Very flexible
This Breadboard Prototyping Starter Kit has everything you need to start with a good prototyping base for your circuits.
The breadboard and jumper wires offer quick setup and the power supply offer quick and safe power for your project.
Will go great with the Breadboard Kit.
The Broad: 830 tie points 2 independent power rail sets in total Adhesive backing Solid construction
The Power: 5v and 3.3v regulator and Off options on each side Standard 2.1mm barrel socket On/Off latching switch USB Port that offers power out and common ground Power indicator LED
The Wire: Male to Male jumper wires 65 piece several lengths options Makes wiring a cinch Many colors Very flexible Bundle
Includes:
1 PCS* 830 Tie Point Solderless Breadboard
1 PCS* Breadboard Power Supply Module
65 PCS* Jumper Cable Wires
6. Qunqi 4packs 830 Tie Point PCB Solderless Breadboard for Arduino
Feature
630 tie-point IC-circuit area plus two 100 tie-point distribution strips providing 4 power rails.ABS Material,Accepts a variety of wire sizes (20-29 AWG)
300V/3-5A,Coloured coordinates for easy component placement
Works great with Arduino,Matching jumper, diameter 0.8mm
Size: 6.5 x 2.2 x 0.3in
Description
Package include:4x 830 tie point breadbaord
7. Elegoo EL-KIT-003 UNO Project Super Starter Kit with Tutorial for Arduino
Feature
Free PDF tutorial(more than 22 lessons) and clear listing in a nice packageThe most economical way to starting Arduino programming for those beginners who are interested
Lcd1602 module with pin header (not need to be soldered by yourself)
This is the upgraded starter kits with power supply module, 9V battery with dc
High quality kite with uno R3, 100 percent compatible with Arduino uno R3
Description
Elegoo Inc. is a professional manufacturer and exporter that is concerned with the design, development production and marketing of arduino, 3d printers, raspberry pi and STM32.
Our Dream is to make the best price and best quality produce for customers.
So we would like to receive your valuable suggestions for our products and we can improve them for you.
Component listing:
1pcs UNO R3 Controller Board
1pcs LCD1602 Module ( with pin header)
1pcs Breadboard Expansion Board
1pcs Power Supply Module WARNING: Pls. do not use the voltage higher than 9V
1pcs Joystick Module
1pcs IR Receiver
1pcs Servo Motor (SG90)
1pcs Stepper Motor
1pcs ULN2003 Stepper Motor Driver Board
1pcs Ultrasonic Sensor
1pcs DHT11 Temperature and Humidity Module
1pcs 9V Battery with DC
1pcs 65 Jumper Wire
1pcs USB Cable
1pcs Active Buzzer
1pcs Passive Buzzer
1pcs Potentiometer
1pcs 5V Relay
1pcs Breadboard
1pcs Remote
1pcs Tilt Switch
5pcs Button (small)
1pcs 1 digit 7-segment Display
1pcs 4 digit 7-segment Display
5pcs Yellow LED
5pcs Blue LED
5pcs Green LED
5pcs Red LED
1pcs RGB LED
2pcs Photoresistor
1pcs Thermistor
2pcs Diode Rectifier (1N4007)
2pcs NPN Transistor (PN2222)
1pcs IC 74HC595
120pcs Resistor
10pcs Female-to-male Dupont Wire
8. Breadboard Solderless Prototype PCB Board ALLUS BB-017 (3pcs) 830 Pin with 4 Power Rails and Double Sided Tape for Raspberry Pi and Arduino
Feature
Solderless breadboard is convenient for the prototypes and circuit design experiment and other DIY projects. Perfect for Arduino, Raspberry Pi, and other programming boardsEasy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling
Self-adhesive back tape makes it easy to stick on a platform, like the Arduino prototype shield
With tight plug-in contacts, the components will sit well after assembly and nothing will wobble
The jumper wires are easy to insert into the breadboard.
Description
3x830 breadboards 830 Pin Breadboard: Size: 166 x 54 x 8 mm (6.54 x 2.13 x 0.32 inch) Material ABS Color: white Package: 3x Breadboard 8309. RGBZONE 3pcs MB-102 Breadboard 830 Point Solderless Prototype PCB Board Kit for Arduino Proto Shield Distribution Connecting Blocks
Feature
630 tie-point ic-circuit area plus 2x100 tie-point distribution strips providing 4 power railsWith self-adhesive tape on the back, make it easy to stick on the Arduino prototype shield
Solderless breadboard interconnect any components with 20-29 AWG(0.3-0.8mm) wire
Easy to use: the breadboard is made of ABS plastic, each row and columns has corresponding letters and numbers, reduce the mistake handling
ideal For high frequency and low noise Breadboard Prototype
Description
830 tie points total. 200 in 2 power rails, 630 in a 30 x 10 matrixWhite plastic, with black legend. Colored power rails
For wires 21 to 26 AWG
2-sided peelable adhesive tape
ABS Material,Accepts a variety of wire sizes (20-29 AWG)
Package include:
3pcs 830 tie-points breadboard
Recent Comments