Top burr tip
If you looking for burr tip then you are right place. We are searching for the best burr tip on the market and analyze these products to provide you the best choice.
Best burr tip
1. Diamond Tip Carving Burr Set 120 Piece
Feature
1/8" shank30,000 rpm maximum
For ceramics, tile , glass, wood, fiberglass
Description
Hobbyist and seasoned pro alike will find themselves creating unbelievable detail with these diamond tip burrs and a rotary power carver. Favorites of jewelers and metalworkers, diamond burrs are being discovered by woodworkers and woodcarvers. These bits offer fast but controlled cutting action. This 120 piece set offers 30 profiles in four grits, 150, 240, 400, and 600, so you can progress from rapid cutting to final finishing cuts with the same profile!2. Strong Vision Technologies: 1mm Burr Tip & Chuck (Use with an Algerbrush II)
Feature
UNSTERILIZED 1mm Burr Tip and ChuckDescription
Algerbrush II 1mm Burr Tip and Chuck. Must be sterilized before each use.3. Carbide Burr Set with 1/4" Shank and 2/5" Head (10MM), CBTONE 5 PCS Double Cut Tungsten Carbide Rotary Burrs 1/4 Inch 6mm Shank Die Grinder Bits for Carving, Polishing, Engraving and Drilling
Feature
MATERIAL - Tungsten Carbide, high hardness and good toughness, machining hardness reach to HRC70.BOUBLE CUT HEAD DESIGN - They have more cutting edges and will remove material much faster and leave a smoother finish than single cut due to producing smaller chips as they cut away the material.
SIZA - Shaft -1/4 inch(6mm);Outer diameter of the tip - 2/5 inch(10mm); Total length 58 - 65mm, Suit for (6mm) 1/4 Inch electric die grinder.
CUTTING BURR SHAPE - Ball, Pointed Tree, Round Nose, Cylinder with End Cut, Cylinder with Round Head.
TUNGSTEN CARBIDE BURRS - Used for cutting, shaping, grinding and for the removal of sharp edges, burrs and excess material (deburring).
Description
CBTONE Carbide Burrs Set - 5pcs Double Cut Solid Carbide Rotary Burr File Set 1/4 Inch Shank for Die Grinder Drill, Metal Carving,Polishing,Engraving,Drilling Double Cut:
Double cut carbide burrs tend to be used on ferrous and non ferrous metals, aluminium, soft steel and also for all non-metal materials such as plastics and wood. They have more cutting edges and will remove material faster.A double cut carbide burr is the most popular cut and will see you through most applications.
Who Uses Carbide Burrs?
Carbide burrs are widely used for metalwork, tool making, engineering, model engineering, wood carving, jewellery making, welding, chamferring, casting, deburring, grinding, cylinder head porting and sculpting.
Carbide Burrs are Harder Than HSS Burrs
Our Carbide Burrs are machine ground from a specially chosen grade of carbide. Due to the extreme hardness of the Tungsten Carbide they can be used on much more demanding jobs than HSS (High Speed Steel).
Specifications:
Material: Tungsten Carbide
Groove: Double Cut
Shank Diameter:1/4" (6mm)
Head Diameter: 2/5" (10mm)
Quantity:5pcs/set
Package Included:
1 x (1/4" Shank and 2/5" Head Ball Burr)
1 x (1/4" Shank and 2/5" Head Cylinder Burr with End Cut)
1 x (1/4" Shank and 2/5" Head Cylinder Burr with Round Cut)
1 x (1/4" Shank and 2/5" Head Pointed Tree Burr)
1 x (1/4" Shank and 2/5" Head Round Nose Burr)
NOTICE: Keep The Carbide Burr On The Move
When using your carbide burr try not to keep it still for too long as this will prevent the burr from digging and jabbing into your material causing unsightly marks and roughness.
4. MTP Tm 60 Pcs Diamond Burr Bits Drill Glass Gemstone Metal for Dremel Craftsman Rotary Tool 1/8" Shanks w/ Box Tip
Feature
MTP TM 20 pc variety of bits per box, come with 3 boxes , total 60 bits1/8" shanks good for most rotary tool such as Dremel , Craftsman , B&D and more
Medium grits perfect for carving , sanding, etching and more
Work on glass, metal , stone, ceramic, wood, plastic
Storage case w/ cover
5. Strong Vision Technologies: Five pack - 1mm Burr Tip ONLY (Use with an Algerbrush II)
Feature
UNSTERILIZED AlgerbrushII 1mm Burr TipDescription
Algerbrush II 1mm Burr Tip ONLY. Must be sterilized before each use.6. Tebery Diamond Burr Bits Drill Glass Gemstone Metal for Dremel Craftsman Rotary Tool 100 Pcs 1/8" Shanks w/Box Tip (5 Boxes)
Feature
A versatile set for numerous projects with Grits 120-150Quantity:20 pc variety of bits per box, come with 5 boxes , total 100 bits
Assorted shapes and sizes include: ball, cone, rounded cylinder, flat top cylinder, tapered & needle point
All burrs with a 1/8" shank - compatible with most die grinders or rotary tools
Highly recommended for jewelers, lapidary use, hobbies, crafts, craft modeling, home repair and so much more
Description
Tebery Diamond Burr Bits Drill Glass Gemstone Metal for Dremel Craftsman Rotary Tool 1/8" Shanks w/ Box Tip
Features:
Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing
Work on glass, metal , stone, ceramic, wood, plastic
All burrs with a diameter 1/8 inch shank - compatible with most die grinders or rotary tools
Total 100 Pieces in 5 boxes
7. Carving Expert Stone Carving Set Polishing Rotary Tools Diamond Burr Accessories for Carving/Engraving Stone, Rocks,Jewelry, Glass, Ceramics Dremel Rotary Tools
Feature
With a approx.1/8" shank - compatible with most Dremel universal power rotary tools.Assortment of shapes and sizes include: impeller,rounded cylinder,cylinder,tapered & needle
Highly recommended for carving and cutting stones, rocks and mortar, DIY engraving hobbies, craft modeling, home repair (wood, some plastic and dogs' nails)etc.
Package:44pcs with plastic box
Sold by Carving Expert, our honor to serve for you, buy with confidence
Description
Included:Impeller: 3x12mm, 5pcs; 3x15mm, 5pcs; connecting rod, 1pc
Grinding burr: cylindrical shape: 3x6mm, 3x8mm,5pcs for each;rounded cylinder: 3x6mm,3x8mm,2pcs for each(Grit 60)
T shape E needle burr: 3x6mm, 4pcs(Grit 60)
Fine sand shape burr: 3x6mm 6pcs;Needle:2pcs(Grit 150)
Diamond Disk: 20mm 2pcs; 30mm 2pcs, with 2pcs connecting rods.
Great for filing glass, ceramics, tile, brick,fiberglass, stone, rock carbide, gold, platinum, silver, metals, and anything with a hard surface. Also fit and easy to install on Dremel rotary tools 4000,4200,8220,3000
Notes:
Please try to replace the collet fit when these carving bits do not fit in your Dremel rotary tools!
Please add enough water and use eye protection!
The grinder speed should not be too high, please adjust the electric grinder to 20000 RPM below and then the cut rods should be installed. High speed will lead to fracture of the rod.
Different shapes of diamond grinding head show that they got different usages, which makes them different from grinding wheels. The diamond grinding heads are cylindrical, elliptic and conical. The shapes are designed in conjunction with the processing of work piece shapes, which can't be manufactured by wheels. So when the wheels are not workable, the grinding heads come into use.
Still the grinding heads can be used in abrasive grinding features like: grinding, polishing and milling products. We all know that diamond is the one of the most hardest materials, which means the diamond grinding heads have the characteristics like Diamond, so it is often used in high hardness alloy, or non-metal super hard materials. So it's usages are different and special in comparison with general wheels or other metal wheel of grinding tools.
8. YXGOOD 10 Pieces Tungsten Carbide Double Cut Rotary Burr Set with 3 mm (1/8 Inch) Shank and 6 mm (1/4 Inch) Head Size
Feature
Material: Tungsten Carbide, Shank diameter: 3 mm(1/8 inch), Cutting edge diameter: 6 mm(1/4 inch), Total length: 50 mm(2 inch).Please check the size before you buy it.Double cut head. Suitable for deburring and polishing cast iron, cast steel, carbon steel, alloy steel, stainless steel and other materials.
Excellent for fine detail work, cutting, engraving, carving, touch-up and finishing.
Processing all kinds of metal(including all sorts of hardened steel) and non-metal (such as marble, jade, bone), and the machining hardness can reach to HRC70.
Generally use with handheld electric or pneumatic tool drive (can also be used in machine tool). The speed of the electric or pneumatic tools usually is 6000-50000 revolutions per minute.
Description
Product Features:1. Assorted shapes and sizes include: ball, cone, rounded cylinder, flat top cylinder, tapered.
2. Cleaning trimming, veining and weld joint of casting, forging and weldment.
3. Highly recommended for jewelers, lapidary use, hobbies, crafts, craft modeling, home repair and so much more.
4. Great for filing glass, ceramics, tile, brick, plastics, wood, fiberglass, stone, rock carbide, gold, platinum, silver, metals, and anything with a hard surface.
5. They are suitable for polishing metals and plastics. Can be used with most hand power tools, including Dremel, Proxxon, and many others.
9. NIUPIKA 1/8" Shank Diamond Burr Bits Set Drill Bit Kit for Glass Gemstone Metal Dremel Grinding Rotary Tool
Feature
1/8 inches Shank,30 Pieces variety of bits per box, come with 3 boxes,total 90 bitsPractical - Suitable to be used with hand drills,flex shafts and dremels
1/8" Shanks good for most rotary tool such as Dremel,Craftsman and more
Used by Jewelry Designers for drilling clean holes
Experience needed,you may break few bits during practice.Use with water,do not run dry
Description
1/8" Shank Diamond Burr Bits Set Drill Bit Kit for Glass Gemstone Metal Dremel Grinding Rotary Tool10. SE 8230DD24 30-Piece Set of Assorted Diamond Burrs, 240 Grit
Feature
30 Diamond-coated burrs; 240 GritShank size of all burrs: 1/8" (3mm)
Shapes: ball, cone, needle point, tapered, flat top cylinder, rounded cylinder
Compatible with most die grinders and rotary tools
Includes compact storage case with clear facing
Description
Designed for you to shape, grind and finish your project with precisionthese burrs can file glass, ceramics, tile, brick, wood, fiberglass, stone, rock carbide, gold, platinum, silver, plastics, metals, and any solid surface. All burrs in this set have a -inch (3 mm) shank size, allowing them to be compatible with most die grinders and rotary tools. These burrs are 1-3/4" long and the head diameters are 1/32" to 3/16". Includes various sizes of the following shapes:
-Ball
-Cone
-Rounded cylinder
-Flat top cylinder
-Tapered
-Needle point
Please note: For long-lasting use please use a lubricant, such as water, when using all diamond-coated tools.
SE is committed to providing the customer with the best source for value possible on the market. You will enjoy the quality, function and usefulness of our SE 8230DD24 30-Piece Set of Assorted Diamond Burrs, 240 Grit.
IPR Rights Notice:
Important: Avoid getting counterfeit items. Genuine SE products come with the SE logo on the packaging.
SE is a registered trademark protected by US Trademark Law.
Recent Comments