Top dryer gas line cap for 2019

If you looking for dryer gas line cap then you are right place. We are searching for the best dryer gas line cap on the market and analyze these products to provide you the best choice.

Best dryer gas line cap

Product	Features	Editor's score	Go to site
	LASCO 17-4031 3/8-Inch Brass Flare Cap		Go to amazon.com
	LARSEN SUPPLY 207886 3/8" Brass Texas Flare Cap		Go to amazon.com
	Anderson Metals 754040-06 Lead Free Flare Cap, Brass, 3/8"		Go to amazon.com
	ZaZaTool New White Dryer Vent Quick Connect Fits 4" Tubes 6" Overall		Go to amazon.com
	Legines Brass SAE 45 Degree Flare Tube Fitting, Flare Cap, 3/8" Tube OD, Pack of 2		Go to amazon.com
	LASCO 17-4049 1/2-Inch Brass Flare Cap		Go to amazon.com
	LASCO 17-4075 15/16-Inch Brass Flare Cap		Go to amazon.com
	LASCO 17-4057 5/8-Inch Brass Flare Cap		Go to amazon.com
	LASCO 17-4011 1/4-Inch Brass Flare Cap		Go to amazon.com
	3/8" BRASS FLARE CAP SAE 45 Line or Gas Fitting Connector coupling 3/8-Inch Female Flare Cap, Brass - MADOL [640F06]		Go to amazon.com

Related posts:

1. LASCO 17-4031 3/8-Inch Brass Flare Cap

Feature

3/8 in.
brass flare cap
length 1.05 in.
Flare cap, for terminating/closing pipe end
Brass material lasts long
Not for use in potable drinking water applications
Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections
Size: 3/8-Inch flare

Description

LASCO Plumbing Specialties 17-4031 is a 3/8-Inch Brass Flare Cap. Flare cap, for terminating/closing pipe end. Brass material lasts long. Not for use in potable drinking water applications. Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections. Size: 3/8-Inch flare.

2. LARSEN SUPPLY 207886 3/8" Brass Texas Flare Cap

Feature

Texas Pattern
Smaller Finer Thread Than Standard Flare
3/8" Brass

Description

3/8" Brass Fine Thread Flare Cap, Texas Pattern, Smaller Finer Thread Than Standard Flare, Carded.

3. Anderson Metals 754040-06 Lead Free Flare Cap, Brass, 3/8"

Feature

Tube O.D. size: 3/8"
Thread size: 5/8-18
Brass
Temperature range: - 65 degree F to +250 degree F
Two piece construction - nut and body

Description

Use with copper, brass, aluminum, or steel tubing. Easy to disassemble and can be reassembled many times with no effect on the seal. Primary uses fuel equipment, plumbing, gases, refrigeration and vacuum. Lead free compliant product which meets Public Law 111-380. Tube O.D. size: 3/8" Thread size: 5/8-18 Brass
Temperature range: - 65 degree F to +250 degree F Two piece construction - nut and body Use with copper, brass, aluminum, or steel tubing Resists mechanical pullout Easy to disassemble and can be reassembled many times with no effect on the seal Primary uses fuel equipment, plumbing, gases, refrigeration and vacuum Lead free compliant product which meets Public Law 111-380 Bagged.

4. ZaZaTool New White Dryer Vent Quick Connect Fits 4" Tubes 6" Overall

Feature

QUICK CONNECT DRYER VENT
Saves space between dryer and wall
Fits 4" tubes. Overall diameter 6"
Easy access for maintenance
Hose will not fall off!

Description

QUICK CONNECT DRYER VENT. Saves space between dryer and wall. Fits 4" tubes. Overall diameter 6". Easy access for maintenance. Hose will not fall off!

5. Legines Brass SAE 45 Degree Flare Tube Fitting, Flare Cap, 3/8" Tube OD, Pack of 2

Feature

Flare cap for terminating/closing pipe end
It is important to use flare fittings when you are dealing with a lot of water pressure going through a pipe or are dealing with high gas distribution.
Flare fittings on the end of copper tubing should provide a strong connection to a fixed point with a threaded nipple.
Used for fuel, oil, air, propane, liquid petroleum (LP) and natural gas lines connections
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories.

Description

Typical application:
LP and natural gas, flammable liquids (special order), instrumental, refrigeration. power steering, hydraulic and pneumatic systems.
Pressure:
Working pressure up to 2000psi depending on tube (O.D),Will withstand burst pressure 5000psi with bundy-weld.
Temperature Range:
-65F to +250F,-53C to +120C
Used With:
Copper, brass, aluminum and steel hydraulic tubing.
Material:
CA360 Brass,CA377 Brass

6. LASCO 17-4049 1/2-Inch Brass Flare Cap

Feature

Flare cap, for terminating/closing pipe end
Brass material lasts long
Not for use in potable drinking water applications
Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections
Size: 1/2-Inch flare

Description

LASCO Plumbing Specialties 17-4049 is a 1/2-Inch Brass Flare Cap. Flare cap, for terminating/closing pipe end. Brass material lasts long. Not for use in potable drinking water applications. Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections. Size: 1/2-Inch flare.

7. LASCO 17-4075 15/16-Inch Brass Flare Cap

Feature

Flare cap, for terminating/closing pipe end
Brass material lasts long
Not for use in potable drinking water applications
Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections
15/16-Inch flare

Description

LASCO Plumbing Specialties 17-4075 is a 15/16-Inch Brass Flare Cap. Flare cap, for terminating/closing pipe end. Brass material lasts long. Not for use in potable drinking water applications. Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections. 15/16-Inch flare.

8. LASCO 17-4057 5/8-Inch Brass Flare Cap

Feature

Flare cap, for terminating/closing pipe end
Brass material lasts long
Not for use in potable drinking water applications
Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections
Size: 5/8-Inch flare; Thread Size: 7/18-14
Size: 5/8-Inch flare

Description

LASCO Plumbing Specialties 17-4057 is a 5/8-Inch Brass Flare Cap. Flare cap, for terminating/closing pipe end. Brass material lasts long. Not for use in potable drinking water applications. Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections. Size: 5/8-Inch flare.

9. LASCO 17-4011 1/4-Inch Brass Flare Cap

Feature

Flare cap, for terminating/closing pipe end
Brass material lasts long
Not for use in potable drinking water applications
Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections
Size: 1/4-Inch flare

Description

LASCO Plumbing Specialties 17-4011 is a 1/4-Inch Brass Flare Cap. Flare cap, for terminating/closing pipe end. Brass material lasts long. Not for use in potable drinking water applications. Used for fuel, oil, air, liquid petroleum (LP) and natural gas lines connections. Size: 1/4-Inch flare.

10. 3/8" BRASS FLARE CAP SAE 45 Line or Gas Fitting Connector coupling 3/8-Inch Female Flare Cap, Brass - MADOL [640F06]

Feature

Short flare nut for connecting to a tube or fitting
Connects to copper, brass, aluminum, or steel tubingBrass for corrosion resistance, ductility at high temperatures, and low magnetic permeability
These fittings contain lead and are not allowed by federal law to be installed for potable water use in the U.S.A. and its territories
Thread Type 5/8-18 UNF for 3/8 Tubing

Description

Consumer Note: It is recommended for the installation to be performed by a qualified person or licensed contractor, plumber, or gas-fitter technician. Use pipe thread sealant between all connectors for proper seal and leak test all connections prior to use as a safety measure. Not intended for Potable Drinking Water Use or Human Consumption Applications

Conclusion

All above are our suggestions for dryer gas line cap. This might not suit you, so we prefer that you read all detail information also customer reviews to choose yours. Please also help to share your experience when using dryer gas line cap with us by comment in this post. Thank you!