Top recommendation for bbs bolts
Finding your suitable bbs bolts is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best bbs bolts including detail information and customer reviews. Let’s find out which is your favorite one.
Best bbs bolts
1. SRR Hardware Rose Gold Three Piece Split Rim Assembly Bolts M7 x 32mm 10.9 HT Steel for BBS RS OZ Wheels (110)
Feature
M7 32mm (32mm Shaft Length)12.9mm Bolt Head Diameter
10.9 High Tensile Steel
Triple plated
For use with multi piece modular wheels
Description
M7 32mm Rose Gold Split Rim Assembly Bolts. These bolts are suitable for certain split rim wheels such as BBS, OZ, Schmidt, Gotti, Work, Kerscher and RH and many more. (All dependent on specific wheel model). These are the perfect finishing touch when refurbishing your split rim wheels. If in doubt over fitment please do not hesitate to message us in advance. The torque setting for these bolts is dependent on the set of wheels you have. The average torque figure for a set of three piece wheels is 22ft/lbs. We recommend that all split rim wheel rebuilds are done by a professional split rim wheel rebuilder. Always tighten from the nut end, however we understand that on some wheels with threaded inserts this may not be possible. We recommend that all plated bolts are maintained and sealed with a good wheel sealant for added protection. If you are looking for corrosion resistant bolts, we offer hardware in both forged stainless steel as well as race spec titanium. Please visit www.srrhardware.com for more information.2. SRR Hardware Chrome Two Piece Split Rim Assembly Bolts M7 x 30mm BBS BMW Style 5 RC RT 10.9 High Tensile Steel Bolts Screws (200)
Feature
M7 30mm (30mm Shaft Length)14.0mm Bolt Head Diameter
10.9 High Tensile Steel
Triple plated
For use with BMW BBS RC RT two piece modular wheels
Description
M7 30mm Chrome Split Rim Assembly Bolts. These bolts are suitable for use only on BMW BBS RC/RT two piece split rim wheels. These are the perfect finishing touch when refurbishing your split rim wheels. Just select the quantity of bolts you need below. If in doubt over fitment please do not hesitate to message us in advance. The average torque figure for a set of BMW BBS RC wheels is 22ft/lbs. We recommend that all split rim wheel rebuilds are done by a professional split rim wheel rebuilder. Always tighten from the nut end, this will draw the bolt through into the barrel allowing the splines on the bolt to lock into the splines in the barrel. We recommend that all plated bolts are maintained and sealed with a good wheel sealant for added protection. If you are looking for corrosion resistant bolts, we offer hardware in both forged stainless steel as well as race spec titanium. Please visit www.srrhardware.com for more information.3. Bully BBS-1212CK Billet Aluminum Locking Fuel/Gas Door Cover with Lock Assembly - Car Accessory or Replacement for Trucks from Cadillac, Chevrolet, GMC
Feature
One-piece cast aluminum with black powder-coated finishNo drilling or cutting required
Locking fuel door (includes 4 keys)
Stainless steel hardware included
Description
Easy to install, secure and visually appealing, what more could you want in a locking fuel door? The Bully locking fuel door installs in minutes, and requires no drilling or cutting. Featuring a black, textured finish with stainless steel accents and integrated lock, the fuel door adds a rugged accent to your truck. Includes 4 keys, but requires your original gas cap. Fits GM Models 99 06.4. SRR Hardware Raw Three Piece Split Rim Assembly Bolts M7 x 32mm Forged Stainless Steel for BBS RS OZ Wheels (120)
Feature
M7 32mm (32mm Shaft Length)12.9mm Bolt Head Diameter
Forged Stainless Steel (Corrosion Resistant)
Raw Finish
For use with multi piece modular wheels
Description
M7 32mm Raw Forged Stainless Steel Split Rim Assembly Bolts. These bolts are suitable for certain split rim wheels such as BBS, OZ, Schmidt, Gotti, Work, Kerscher and RH and many more. (All dependent on specific wheel model). These are the perfect finishing touch when refurbishing your split rim wheels. If in doubt over fitment please do not hesitate to message us in advance. The torque setting for these bolts is dependent on the set of wheels you have. The average torque figure for a set of three piece wheels is 22ft/lbs. We recommend that all split rim wheel rebuilds are done by a professional split rim wheel rebuilder. Always tighten from the nut end, however we understand that on some wheels with threaded inserts this may not be possible. We recommend that all plated bolts are maintained and sealed with a good wheel sealant for added protection. If you are looking for corrosion resistant bolts, we offer hardware in both forged stainless steel as well as race spec titanium. Please visit www.srrhardware.com for more information.5. SRR Hardware Black Two Piece Split Rim Assembly Bolts M7 x 24mm 10.9 HT Steel for BBS RM OZ Wheels (90)
Feature
M7 24mm (24mm Shaft Length)12.9mm Bolt Head Diameter
10.9 High Tensile Steel
Triple plated
For use with multi piece modular wheels
Description
M7 24mm Black Split Rim Assembly Bolts. These bolts are suitable for certain two/three piece split rim wheels such as BBS, OZ, Schmidt, Gotti, Work, Kerscher and RH and many more. (All dependent on specific wheel model). These are the perfect finishing touch when refurbishing your split rim modular wheels. If in doubt over fitment please do not hesitate to message us in advance. The torque setting for these bolts is dependent on the set of wheels you have. The average torque figure for a set of two piece wheels is 15ft/lbs. We recommend that all split rim wheel rebuilds are done by a professional split rim wheel rebuilder. Always tighten from the nut end, however we understand that on some wheels with threaded inserts this may not be possible. We recommend that all plated bolts are maintained and sealed with a good wheel sealant for added protection. If you are looking for corrosion resistant bolts, we offer hardware in both forged stainless steel as well as race spec titanium. Please visit www.srrhardware.com for more information.6. SRR Hardware Chrome Three Piece Split Rim Assembly Bolts M7 x 32mm 10.9 HT Steel for BBS RS OZ Wheels (160)
Feature
M7 32mm (32mm Shaft Length)12.9mm Bolt Head Diameter
10.9 High Tensile Steel
Triple plated
For use with multi piece modular wheels
Description
M7 32mm Chrome Split Rim Assembly Bolts. These bolts are suitable for certain split rim wheels such as BBS, OZ, Schmidt, Gotti, Work, Kerscher and RH and many more. (All dependent on specific wheel model). These are the perfect finishing touch when refurbishing your split rim wheels. If in doubt over fitment please do not hesitate to message us in advance. The torque setting for these bolts is dependent on the set of wheels you have. The average torque figure for a set of three piece wheels is 22ft/lbs. We recommend that all split rim wheel rebuilds are done by a professional split rim wheel rebuilder. Always tighten from the nut end, however we understand that on some wheels with threaded inserts this may not be possible. We recommend that all plated bolts are maintained and sealed with a good wheel sealant for added protection. If you are looking for corrosion resistant bolts, we offer hardware in both forged stainless steel as well as race spec titanium. Please visit www.srrhardware.com for more information.7. TOGGLER SNAPTOGGLE BBS Toggle Anchor, 304 Stainless Steel Channel, Made in US, 3/8" to 3-5/8" Grip Range, For 1/4"-20 UNC Fastener Size (Pack of 100)
Feature
Toggle anchor installs behind 3/8"- to 3-5/8"-thick hollow materials including gypsum board, drywall, and concrete block to provide a secure hold from within the mounting materialAnchor affixes to the wall before adding the bolt and fixture, allowing one-person installation and fixture changes
Made in USA, and works with 1/4"-20 UNC-threaded metal bolts (sold separately)
Ultimate tensile strength is 265 lb. in 1/2" drywall and 1,080 lb. in concrete block with a 1/4"-20 UNC bolt
Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations)
Description
The TOGGLER SNAPTOGGLE BBS toggle anchor provides a secure hold from within various hollow materials 3/8" to 3-5/8" thick including gypsum board, drywall, and concrete block, and is made in USA. The anchor requires a 1/4"-20 UNC-threaded metal bolt with a minimum length equal to the thickness of the item being fastened and the thickness of the mounting material plus 1/2". The anchor channel will not rotate when installing the bolt, whether installing by hand or with a screw gun, and will stay in place if the bolt is removed to facilitate fixture and screw changes. The SNAPTOGGLE anchor meets Federal Specification FF-B-588-D for Type V anchors.
The anchor consists of a corrosion-resistant 304 stainless steel anchor channel that inserts through a 1/2" drilled hole in walls, ceilings, or floors and installs against the back side of the mounting material; plastic straps attached to the channel that position it into place; and a plastic cap that slides down the straps and presses into the drilled hole firmly to lock the anchor channel in place behind the mounting material. Once the cap is set in place, the straps snap off by hand. The item being fastened affixes to the mounting material by inserting a bolt through the item, into the drilled hole, and through the anchoring channel behind the material and tightening.
Specifications
Ultimate Tensile and Shear Strength Values
| Media | Drill Diameter | Bolt Description | Ultimate Tensile Strength | Ultimate Shear Strength |
| 1/2" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 265 lb. | 241 lb. |
| 5/8" Drywall | 1/2" | 1/4"-20 UNC zinc-plated steel | 356 lb. | 324 lb. |
| 1/2" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 425 lb. | Not available |
| 5/8" Drywall with 25 Gauge Stud* | 1/2" | 1/4"-20 UNC zinc-plated steel | 464 lb. | Not available |
| Concrete Block | 1/2" | 1/4"-20 UNC zinc-plated steel | 1,080 lb. | Not available |
*Failure measured as breakage of drywall portion.
Warning: Use one-fourth or less of listed maximum values for safe working loads (as required by local regulations). For more information, see the manufacturer's technical bulletin.
Anchors provide reinforcement to a fastener that would otherwise have insufficient hold in substrates such as concrete, brick, stone, drywall, or other materials for a particular application. The fastener may be included with or integrated into the anchor itself, or it may be sold separately. Anchors provide support through various methods, including expansion from within or behind the substrate or even adhesive compounds.
TOGGLER Anchor System manufactures wall anchors and toggle bolts. The company, founded in 1968, is headquartered in Norwalk, CT.
8. For Ford F100/F150/F250 5.9L 6.4L V8 BBS FE Engine Pair Stainless Steel Long Tube Exhaust Header Manifold
Feature
Made of High Quality T-304 Stainless Steel with Computerized Mandrel-Bends for Strength and Durability i.e. Maximizing Smoothest High Exhaust Air Flow Rate4-1 High Performance Long Tube Racing Spec. Design/ Flange Type : 3-Bolt
Inlet/ Outlet: 1-3/4" OD / 3" OD / Increase High Flow Air, Instantly Gain 10 -15 Hp. / Tq.
Weldable 3" OD to 2-1/2" OD Collector Reducers / 18 Gauge Wall Piping
5/16" Thick Header Flanges / TIG Welded CNC Machine Flange
Description
Getting more air into your engine and more exhaust out is the key to a performance motor. That's where exhaust headers is significant as the first revenue of an exhaust system. Exhaust performance headers manipulate the air flow with the performance-robbing exhaust manifold that came with your car. Headers provide each cylinder with its own mini exhaust pipe, which means exhaust headers prevent interference among cylinders; thus, the backpressure that occurs in common exhaust manifolds. When cylinders don't have to fight with each other to expel their exhaust, they can put more power through the wheels, pushing the vehicle. Combining with a high performance cold air intake, and a cat-back exhaust system, a header system removes all restrictions of your engine, then, it is able to perform at its full potential.
Package Included:
Compatible with:
9. SRR Hardware Gold Three Piece Split Rim Assembly Bolts M7 x 32mm 10.9 HT Steel for BBS RS OZ Wheels (160)
Feature
M7 32mm (32mm Shaft Length)12.9mm Bolt Head Diameter
10.9 High Tensile Steel
Triple plated
For use with multi piece modular wheels
Description
M7 32mm Gold Split Rim Assembly Bolts. These bolts are suitable for certain split rim wheels such as BBS, OZ, Schmidt, Gotti, Work, Kerscher and RH and many more. (All dependent on specific wheel model). These are the perfect finishing touch when refurbishing your split rim wheels. If in doubt over fitment please do not hesitate to message us in advance. The torque setting for these bolts is dependent on the set of wheels you have. The average torque figure for a set of three piece wheels is 22ft/lbs. We recommend that all split rim wheel rebuilds are done by a professional split rim wheel rebuilder. Always tighten from the nut end, however we understand that on some wheels with threaded inserts this may not be possible. We recommend that all plated bolts are maintained and sealed with a good wheel sealant for added protection. If you are looking for corrosion resistant bolts, we offer hardware in both forged stainless steel as well as race spec titanium. Please visit www.srrhardware.com for more information.10. SRR Hardware Raw Split Rim Bolts M7 x 24mm Forged Stainless Steel for BBS RM OZ Wheels (130)
Feature
M7 24mm (24mm Shaft Length)12.9mm Bolt Head Diameter
Forged Stainless Steel (Corrosion Resistant)
Raw Finish
For use with multi piece modular wheels
Recent Comments