Top recommendation for multimeter tester dc current
Finding your suitable multimeter tester dc current is not easy. You may need consider between hundred or thousand products from many store. In this article, we make a short list of the best multimeter tester dc current including detail information and customer reviews. Let’s find out which is your favorite one.
Best multimeter tester dc current
1. Etekcity Digital Multimeter Amp Volt Clamp Meter Voltage Tester with Ohm, Continuity, Diode and Resistance Test, Auto-Ranging, Red, MSR-C600
Feature
Autoranging clamp multimeter measures AC currents, AC/DC voltage, resistance, and also provides diode and continuity testsThe clamp measures the AC current in a conductor up to 26mm without interrupting the circuit
Additional features include: Data Hold, Max Reading, and an easy-to-read large LCD
Comes with a handy carrying pouch, perfect for use while you're on the go
Automatically enters sleep mode after 15 minutes of inactivity for energy conservation; 1-year warranty and lifetime support from Etekcity
Description
Etekcity's Digital Clamp Multimeter makes household electricity maintenance safe and simple. While having the capability to test AC/DC voltage, resistance, continuity and diodes, the built-in clamp enables you to measure AC current without needing to break circuits to come into direct hazardous contact. With a capacity of 400amps, the clip can comfortably extend to test cords and wires up to 28 mm in diameter. The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring. and easier. This device is the perfect startup multimeter for entry-level electricians, hobbyists, and general household uses.Specifications
Safety/Compliances: IEC61010 CAT.II 600V, CAT.III 300V over voltage and double insulation
Display: Maximum display 1999
Range selection: Auto ranging
Overload display: Display OL or OL
Measurement Speed: Updates 3 times/second
Max.Jaw Opening: 28mm diameter
Tested Max. Current Conductor Size: 26mm diameter
Diode test: Yes
Continuity test: Yes
Battery Life: about 150hours (alkaline battery)
AC Current:
-Range and Accuracy: 2A{<1A, (4%+40); 1A, (3%+30)}, 20A{4A, (3%+12), >4A, (2%+8)}, 200/400A (1.5%+5)
- Overload Protection: 400A rms
AC Voltage:
- Range and Accuracy: 2/20/200V (1.2%+5), 600V (1.5%+5)
- Input Impedance: 10 M<100pF
- Overload Protection: 600V rms
DC Voltage:
- Range and Accuracy: 200mV (0.8%+3); 2/20/200V (0.8%+1); 600V (1%+3)
- Input Impedance: 10 M
- Overload Protection: 600V rms
Resistance:
- Range and Accuracy: 200 (1.2%+2); 2/20/200K (1%+2); 2M (1.2%+2), 20M (1.5%+2)
- Input Impedance: 10 M
- Overload Protection: 600Vp
Package Includes
1 x Etekcity Digital Clamp Meter
2 x Test Leads (a pair)
2 x AAA 1.5V batteries (installed)
1 x Carrying Bag
1 x User Manual
2. DC Ammeter, DROK Digital DC Multimeter 0-90V 100A Voltmeter Ammeter 12v 24v 30v 48v 60v 80v Voltage Volt Current Amp Power Watt Capacity Time Meter Battery Tester Monitor with LCD Screen Hall Sensor
Feature
MULTIMETER: this DROK digital multi-function meter can be used to test voltage, current, power, capacity time and other physical information; current measurement range is 0~100A; voltage measurement range is 10~90V.HALL SENSOR: DROK voltage current meter adopts non-contact Hall sensors to test current, which is safety and convenient. Moreover, the instrument show date in colorful LCD display and its information is comprehensive and humane.
MEMORY FUNCTION: accumulated capacity will be stored when power off suddenly, you can clean it up or make it full.
PROTECTIVE FUNCTION: the voltmeter ammeter can be set parameters for overvoltage protection, undervoltage protection, over current protection, over charging capacity protection and time protection and so on.
APPLICATION: DROK volt ampere tester is quite suitable for monitoring the output voltage and current, as well as applications such as battery charge and discharge.
Description
Parameters:
Current Measurement Range: 0~100 A
Voltage Measurement Range: 10~90 V
Display Resolution: 0.1A
Current Precision: 3% 5 digits
Voltage Precision: 2%5digits
Measurement rate: 5time/second
Open Holes (mm): 76.5*39.2mm
Size: 794352(mm)
Protection Functions:
OVP ( Over-voltage protections): 0.01V~90V
OPP( Over-power protections ): 0.01W~9.99KW
LOP( undervoltage protection): 0.01V~90V
OCP( Over-current protections ): 0.1~100A
OAH( Over-charge protection ): 0.01AH~9999AH
OFT( Over-time protection ): 1min~99hour59min
Package Includes:
1* Multifunctional Bidirectional Meter
1*Hall Sensor
3. Neoteck Pocket Digital Multimeter 8233D PRO 2000 Counts Auto Ranging Digital Multimeters Digital Multi Tester-DC Current Resistance Diodes Transistor Audible Continuity Tester with Backlit LCD
Feature
Neoteck 2000 Counts 8233D PRO Pocket Digital Multimeter 2000F Capacitance and 200KHz Frequency Measurement, Accurately Measures Current, Voltage, Resistance, and More, Maximum Reading over Time, Auto-ranging and Continuity BuzzerLarge Backlit LCD Display Auto Polarity Display, Easy to Read Large Backlit LCD Display, Back-light Makes a Real Difference in Low Light Areas
CE Rated Digital Mulimeter with Over Load Protection Designed to Safely and Accurately Troubleshoot a Variety of Automotive and Household Electrical
Nice Protective Orange Shell with Stand Built The Case with Our Multimeter is Some Kind of Non Slip, Slightly Soft Plastic that Will Help with Drop Protection, The Stand Places the Device at a 45 Degree Angle and Makes the Screen Easy to See Hands Free
Included 9V Volt BatteryThe Compartment Lid at the Back is Secured by One Cross Head Screw, Not Difficult to Remove at All; Also, Included 2 x Test leads and 2 x Banana Plug to Alligator Clip Cable
Description
All Neoteck Product Comes With 18 Months US Base Warranty
Overview:
Neoteck 8233D PRO multimeter using the word high 15mm LCD display with backlight, even in low light places can clearly read the display value. Is a high performance, high reliability, compact handheld 3 1/2 digit digital multimeter auto range. This Meter is designed to meet IEC 61010-1 & CAT II 600V over voltage category and double insulation. The meter with holster that is giving the main body, though downsized, high resistance against the shock of a drop.
Feature:
- Over load protection: Used the PTC protection circuit for Resistance, frequency measurement
- Double Current Fuses. High quality ,More Safety. Meet For Euro Standard.Safety Class: IEC 61010-1, CAT II 600V
- 2000F Capacitance and 200KHz Frequency measurement
- Make Sound of Continuity test more Loudly
- Back Light
- DATA HOLD function
- Low battery indication
- Auto Power-OFF
- Diode test
Specification:
- DC Voltage: 200mV/2V/20V/200V+-(0.5%+2) 600V+-(0.8%+2)
- AC Voltage: 2V/20V/200V+-(0.9%+3) 600V+-(1.2%+3)
- DC Current: 200uA/2000uA/20mA/200mA/10A+-(1.5%+3)
- AC Current: 200uA/2000uA/20mA/200mA/10A+-(1.5%+4)
- Resistance: 200ohm/2Kohm/20Kohm/200Kohm+-(0.8%+2) 2Mohm/20Mohm+-(1.0%+2)
- Frequency: 200kHz
- Capacitance:2000uF
- Diode check: Resolution: 0.001V, Will display the forward drop voltage
- Continuity check: If measured resistance less than 100, will buzzer is sounded. Sound loudly ,Easliy to hear
- Power Supply: 9V Battery(6F22) (include)
Package Include:
- 1 x Neoteck 8233D Pro Multimeter
- 2 x Test Leads
- 2 x Banana Plug to Alligator Clip Cable
- 1 x User Manual
- 1 x Box
4. Eversame USB Digital Power Meter Tester Multimeter Current and Voltage Monitor, DC 5.1A 30V Amp Voltage Power Meter, Test Speed of Chargers, Cables, Capacity of Power Banks-Black
Feature
MULTIFUNCTIONAL USB TESTER: USB Meter Tester is mainly used to detect USB charging current, voltage, discharge capacity, quantity of electric charge, power, timing and so on. Meanwhile multimeter USB detector can be applied to the Power Capacity Storage and Over/Low Voltage-current Protection. It allows you to find the charging problem of the USB cables, wall chargers, and car charges more easily.BUILT-IN MORE SAFETY: Each USB meter tester has been built-in circuit with containing CW3002D chip for accelerating Large Current Fast Charging. Plus the Interior Smart System is designed to detect safety. The multimeter tester also supports QC 2.0/3.0 high voltage test, with the function of cutting off automatically when it's fully charged, to protect your valuable devices effectively.
PREMIUM LCD DISPLAY: Crafted from high-grade LCD monitor with low power consumption feature, bright and clear enough to monitor the parameters on the screen. Comes with three various display modes for your choosing. Ideally be broadly applicable to test capacity and electric energy of power bank; test the maximum output current of the charger; and test charging speed and quality of data cable and charging cable.
WIDE TESTING RANGE & SIMPLE OPERATIONInput/Output Voltage: DC3-30V, Current Range: 0-5.1A. This portable USB tester is easy to carry and enables you to put it in your bag or your pocket whenever you go, along with the symmetrical and reversible connector for your simply operation.
PACKAGE: 1X Multimeter USB Tester. 100% SATISFACTION WARRANTY: We stand behind all of our products 100%.Every item includes one year hassle-free guarantee with considerate customer service. Eversame always bear in mind that your satisfaction is our priority. For any reason you are unsatisfied with our product at any time, just feel free contact support for exchange or refund. Our customer service team are here and ready to assist you with any questions.
Description
Eversame Power Meter Tester-Each Power Meter tester from Eversame will be strictly tested by our QC Department, to prove the importance we set on quality.
-Perfect for evaluating whether or not the computer, USB wall charger, USB car charger are outputting acceptable voltage and current range for the device you are connecting
-This Power Meter Tester can plugs directly into any USB socket or cable, which displays on the screen the voltage, current and capacity
-It provides you a rough estimate of the capacity of the device you are charging
Specification
Input Voltage: 3V-30V
Input Current: 0-5.1A
Accuracy: +/- 1%
Display: LED, show voltage and current simultaneously
Maximum Capacity Value: 99999 mAh
Tester three dimensional size: 60*24*14mm
Operation Introduction
(1). The short press is the interface switch, and long press is battery capacity and other data reset;
(2). In the main interface, five-press is the setting of automatic power outages and timing turn-off(Five-press in the main interface, the character in the lower right corner of the display stars flashing, choose three settings of 'AO.. / OFF / 1-24H' by clicking or double-clicking, and when the flashing stops, it means the system saves the current settings automatically);
(3). Six-press is Chinese/English interface conversion.
Warm Tips
-This power meter tester may not support fast charging for some type of smartphones and devices.
-If any tester you bought from Eversame can't display the correct parameters while testing your devices, please feel free to contact us firstly and we will provide quick respond and offer you good solution.
Package Included
1 x Current Voltage Test Meter
Easy-To-Reach Support
Every product includes one year hassle-free guarantee with excellent after-sale service
5. Meterk Digital Clamp Meter Multimeter 4000 Counts Auto-ranging Multimeter AC/DC Voltage&Current Tester with Resistance, Capacitance, Frequency, Diode, Hz Test, Non-contact Voltage Detect
Feature
MULTI-PURPOSE CLAMP METER WITH TRUE RMS AUTO-RANGE: Accurate AC/DC Voltage, AC/DC Current, Frequency, Duty Cycle, Diode, Capacitance and Resistance Measurement.WITH NCV & LIVE LINE TEST FUNCTION: Non-contact Voltage Detection Function with a Sensor to Detect Voltage and Avoid Electric Shock without Touching Any Wires. Light and Sound Alarm If Detects the AC Voltage(90V-1000V) or Live Wire
CONTINUITY TEST & OVERLOAD PROTECTION: Designed to Safely and Accurately Confirm the Circuit Conducts Electricity with Low Voltage Indication and Overload Protection. Light Alarm If Detects the AC Voltage(90V-1000V) or Live Wire.Shows "OL" on the LCD If Overload
EASY TO USE AND READ: Small and Portable to Carry and Use. High Resolution, Large Backlit LCD Screen Improves Visibility. The flashlight can Access Measurement in a Dark Place. Low Battery Display.Widely used in your life.
YOU WILL GET: Meterk Digital Clamp Meter, 2*Test Leads, 3*AAA Batteries(Inside the Clamp meter), User Manual(English + French + German + Italy + Spanish) , 1 * Storage Bag
Description
Specifications:Brand Name: Meterk
Material: ABS
Color: Orange
Safety Class: 600V CAT , pollution class RoHS CE FCC WEEE
Operating Altitude: 2000 meters
Temperature Coefficient: 0.1x accuracy/ (18 or 28)
Max. allowable voltage between terminals and earth ground: 600V DC or 600V AC True RMS
Sampling Speed: approx. 3 times / second
AC Current (A): 40A/400A (3.0%+6)
DC Current (A): 40A/400A (3.0%+6)
AC Voltage (V): 4V/40V/400V/600V (1.2%+10)
DC Voltage (V): 400mV/4V/40V/400V (0.8%+2), 600V (1.0%+2)
Resistance (): 400/4K/40K/400K/4M (0.8%+2), 40M (1.0%+2)
Capacitance (F): 40nF/400nF/4F/40F/100F (3.0%+10)
Hz: 50Hz-100KHz (1%+2)
Duty Ratio: 0.1-99.9% (3%+3)
NCV Test Pencil: 90V AC Voltage
General Characteristic
Display Count: 4000 (3 3/4 LCD)
Auto Range: YES
Max Clamp Opening Size: 26mm / 1.02in
Diode: Around 1.5V
NCV: YES
Diode/Continuity: YES
Frequency/Duty Cycle: YES
Data Hold: YES
Zero Mode: YES LCD Backlight: YES
Overload Indication: shows "OL" on the LCD
Auto Power Off: YES
Continuity Buzzer: YES
Low Battery Indication: YES
Input Protection: YES
Input Impedance for DCV: 10M
Power: AAA 1.5V x 3Included
Safety Rating: CE CAT.III600V RoHS CE FCC
Package List:
1 * Clamp Meter
2 * Test Lead
1 * Storage Bag
1 * User Manual(English + French + German + Italy + Spanish)
6. Multimeters, Tacklife CM03 Clamp Meter Auto-Ranging 6000 Counts NCV Electrical Tester AC Current, AC/DC Voltage, Ohm Meter Digital Multimeter, AC Signal/Inherent Frequency Electronic Tester
Feature
FULLY SMART TOOL - One key control, Auto-identify smart clamp meter, breakthrough traditional rotary button multimeter. AC/DC voltage, AC current, resistance, frequency, continuity digital tester, improve work efficiency, save your value time, increase the fun of workMINI MULTIMETER - Palm clamp meter, easy to master & carry. The mini form factor makes it easy to get into tighter spaces for automotive or household electrical issues. Clamp tightly closed to reduce the interference of magnetic field, improve the measurement accuracy
NCV ELECTRICAL TESTER - Press the "NCV" button about 3 sec to active the function, if the AC voltage is detected, the indicator will light up with buzzer alarms. When testing continuity or the test value exceeds the test range, the indicator will also lit, intuitive tester
EXCELLENT CLAMP METER - Inherent frequency and AC signal frequency can be measured, the backlight is bright enough to make the night working easier. with the data hold function, you can not be worried about forget the data you have measured. An intimate measuring meter
WHAT YOU GET- 1 x Tacklife CM03 Smart Clamp Meter, 2 x Test Leads, 21.5V AAA Batteries, 1 x User Manual, 1 x High quality Carrying bag, 1 x 24-Month Warranty. Be assured of purchase clamp meter, Please contact us at the first time if the multimeter has any problems.
Description
Tacklife - Professional team on Amazon, which deals only with development of the tools.We commit ourselves to using qualitative tools to improve the quality of life.
One Button Operation
Tacklife CM03 clamp meter can automatically detect what kind of test function
Clamp meter automatic detection sequence is: AC voltage - DC voltage - AC current - Resistance - On-off
Resistance & Overrange
If resistance is less than 50, you can hear the built-in buzzer beep, and when the measured value exceeds the measurable range,
the screen will display '0L' or '-0L' to remind for a larger range of tests.
Data Hold and Automatic Shutdown
Data Hold is easy reading and recording, and there is no operation for 10 minutes after power on, the meter will go into hibernation to save power.
NCVand BACKLIGHT
AC voltage more than 90V, the meter buzzer alarm and the backlight flashes.
Long press the backlight button for 2 seconds, open the backlight effect to facilitate the reading, the backlight will automatically shut down in 1 minute.
Specification:
Display: LCD
DC VoltageRange and Accuracy: 0.5V - 600V (0.5%+3)
AC Voltage Range and Accuracy: 1.0V - 600V (0.8%+5)
AC Current Range and Accuracy: 6A/60A/200A (2.5%+8)
Resistance Range and Accuracy : 6K(0.8%+3)
Frequency: 40Hz/1000Hz (1.0%+5)
Maximum display value: 6000 counts
Power supply: 2 x 1.5V AAA batteries
Security/certification: IEC-61010-1, IEC-61010-2-030, IEC-61010-2-032, CAT III 600V safety rating
Note:
When measuring large currents and voltages, please follow the instructions in accordance
with the instructions to avoid possible accidents such as electric shock or personal injury.
Package Content:
1 x Tacklife CM03 Professional Digital Clamp Meter
1 x Test Leads (Pair)
2 x 1.5V AAA Batteries
1 x User Manual
1 x Carrying Bag
1 x Warranty Card
7. Digital Multimeter MESTEK AC DC Multimeters Current Voltage Auto-Ranging NCV Voltage Tester Amp Volt Ohm Hz Diode Resistance Meter with Battery Electric Test Lead Probes & Alligator Clips for Home Car
Feature
MULTI FUNCTIONS - Reach 1999 counts.Measure the DC voltage, DC current,AC Voltage,resistance, diodes, circuit continuity etc.Durable enough for long term use, test fundamental electric issues of automotive or household appliances, suitable for electrical circuit, home users, enthusiasts, professional electricians and technicians.Can be used for home wiring projects, electronics repair,testing batteries and so on.NCV INDUCTION FUNCTION-Turn the rotary swith to the NCV gear and close to the lead being measured,buzzer will alarm while the backlight will flash when instrument detects AC voltage.
DATA HOLD/BACKLIGHT & FLASHLIGHT-Press the "HOLD" button,the last reading measured on the display will be maintained,you have no need to worry about forget the data you have measured.Independent Flashlight and Backlight humanized design for visibility in dark areas.
SMART DIODE/CONTINUITY & BATTERY VOLTAGE MEASUREMENT-Continuity test and diode measurement are executed in smart mode without the need to switching button.Independent battery measurement function makes it easy to measure battery voltages of 1.5V and 9V.
KEEP YOU AND THE ENVIRONMENTAL SAFE- EN61010-1,-2-030, EN61010-2-032 600V CAT III & ROHS/REACH.We strive to make the BEST Products Possible.If you don't feel 100% satisfied with the product, please contact us and we will do our best to solve all problems.
Description
Electrical tester as a digital multimeter, is widely used in house circuit repairing, in the school, laboratory, factory and other social area.8. Fluke 325 Clamp Multimeter AC-DC TRMS
Feature
Digital clamp meter measures AC current to 400 amp, AC and DC voltage to 600V, and resistance to 4 kilohmsTrue RMS sensing meter provides accurate readings when measuring linear or non-linear loads, regardless of waveform
Jaw opening measures current in a conductor up to 30mm without touching or interrupting the circuit
Audible continuity sensor confirms that the circuit conducts electricity
Meets IEC safety standard 61010-1, and is rated for CAT IV installations to 300V and CAT III installations to 600V
400 A AC and DC current measurement
Resistance measurement up to 40
Ac voltage make for the most accurate measurements on non-linear signals
Temperature and capacitance measurement
Frequency measurement
Description
The Fluke true-rms clamp meter is a great clamp meter for general, grab-and-go troubleshooting needs. The FLUKE-325 is ideally suited for current measurements up to 400 a in tight cable compartments.9. Clamp Meter Amp meter Digital Multimeter 6000 Counts with NCV Auto-Ranging Testing AC/DC Current&Voltage, Continuity Electrical Tester, Diode, Resistance, Capacitance, Frequency- Tacklife
Feature
BETTER CLAMP METER: Auto-ranging clamp meter measuring AC and DC Voltage, Current; Resistance, Diode, Continuity, Duty Cycle ; A perfect troubleshooting meter to help you solve automotive or household electrical problems quickly and safelyNCV DETECTOR: If AC voltage detected, the visible LED lights will shine and the beeper will sound(range is 90V-1000V); Only when testing current, the flashlight of multimeter shines; Work is more convenient, devoting to using the great meter to improve your life quality
HUMANIZED MULTIMETER - With the backlight display to read and record easily under dark areas; Automatically enters sleep mode after 30 minutes of inactivity for energy conservation; Devoting to optimize user experience, perfect for both professional or new users
USER-FRIENDLY TESTER: The "ZERO" key make for decrease the data error influenced by the earth magnetic field, help you to obtain more accurate measurement; Ergonomic design, better feeling of grasp to measure circuit; Made of high quality ABS, lightweight and portable
WAHT YOU GET: 1x Tacklife CM01A digital clamp meter, 2x Test Lead, 3x AAA Batteries, 1x user manual, 2 months warranty; Be assured of purchase Tacklife CM01A digital clamp meter multimeter, Please contact us at the first time if the multimeter has any problems
Description
Tacklife CM01A Digital Clamp Meter is a portable, handheld professional meter has everything you need for a full multimeter.It is designed according to IEC1010-1,IEC1010-2-030 and IEC1010-2-032 concerning safety requirements.
This clamp meter can be used to troubleshoot electrical problems safely and accurately in a wide array of industrial and household devices.
(such as electronic equipment, automotive, domestic appliances, power supplies, and wiring systems. )
Tacklfie CM01A has the power to get the job done faster, safer, and easier.
- Jaw opening measures AC current in a conductor up to 26mm without interrupting the circuit
- NCV function to detect AC voltage, get rid of risk of electric shock
- Use the PTC protection circuit for Resistance
- Features Data Hold, Max Reading and an easy-to-read large LCD
- The operator can access measurement result in a dark place with the flashlight.
- The clamp multimeter includes a lightweight portable carry pouch for easy storage and handling.
- The multimeter also includes safely insulated test probes with plastic gripping for safer handling while measuring.
Specification:
DC Voltage Range and Accuracy: 400mV/4V/40V/400V (0.8%+2), 600V (1.0%+2)
AC Voltage Range and Accuracy: 4V/40V/400V/600V (1.2%+10)
DC Current Range and Accuracy: 40A/400A (3.0%+6)
AC Current Range and Accuracy: 40A/400A (3.0%+6)
Resistance Range and Accuracy: 400/4K/40K/400K/4M (1.2%+2), 40M (2.0%+5)
Capacitance Range and Accuracy: 40nf/400nf/4uf/40uf/100uf (3.0%+1-0) Display: 4000 counts
MAX clamp opening size: 26mm
Sampling speed: approx. 3 times / second
Digital display: 3 3/4 LCD
Package:
1x Tacklife CM01A digital clamp meter,
2x Test Lead,
3x AAA Batteries,
1x User Manual,
24 Months Warranty.
10. Voltcraft Current Clamp Meter VC330; CAT II 600 V, CAT III 300 V, 2000 Counts, Compact and Robust, AC/DC Current Reading, Multimeter Functions, True RMS Readings, Resistance Reading
Feature
DESIGNED FOR ALL MEASUREMENT TASKS: Standard measurments V/DC, V/AC, A/DC Resistance; True RMS measurement; 2000 counts, CAT II 600V, CAT III 300VULTRA COMPACT ENTRY-LEVEL CLAMP METER: State-of-the-art ergonomic technology and excellent value for money. The clamp meter enables non-contact current readings and additional multimeter functions. The clamp attachment makes separating circuits completely unnecessary
SPECIAL FEATURES; IDEAL FOR AUTOMOTIVE AND SOLAR ENERGY RELATED TASKS: Manual range; Selectable display backlighting, Auto power-off, One-handed mode
ROBUST AND HANDY: The shock-proof device features a composite enclosure including a protective rubber layer. The rubber-coating also provides lots of grip.
GERMAN BRAND: The German brand Voltcraft is committed to provide all users the right equipment in a perfect quality, no matter if they need it for hobby or work.
Description
DescriptionThese ultracompact entry-level clamp meters feature state-of-the-art ergonomic technology and represent excellent value for money. It enables non-contact current readings & additional multimeter functions. The clamp attachment makes separating circuits completely unnecessary. It is also perfect for all things automotive and solar energy as the meter comes with a DC reading function.
Robust and handy
The shock-proof device features a composite enclosure including a protective rubber layer and it also provides lots of grip.
Clamp meter for no-break current readings
The clamp meter enables non-contact AC and DC readings, it takes current readings without the need to switch off and separate power circuits, preventing plant downtime.
True RMS readings ensure accuracy
True RMS measurement enables reading of asymmetrical voltage and amperage with wave forms other than a sinus.
Factory calibration ensures accurate readings
Calibration according to manufacturer standards is part of Voltcraft Quality Assurance. Ensuring high quality products and compliance with tolerance limits as outlined in the user manual. This does not include certification.
Features
- Reads: AC/DC current (range: 2 A, 20 A, 100 A)
- AC/DC voltage
- Resistance
- Capacitance
- Acoustic continuity tester
- Diode testing
- Data hold
- Voltage and resistance auto-range
- Selectable display backlighting
- DC zero reset option
- Auto power-off
- Low battery indicator
- One-handed mode
- Built-in non-contact AC voltage tester (NCV).
Included in delivery
- 2x safety test lead
- Batteries
- Bag
- User manual
Recent Comments