Top traction hobby 1/8 rc for 2019
If you looking for traction hobby 1/8 rc then you are right place. We are searching for the best traction hobby 1/8 rc on the market and analyze these products to provide you the best choice.
Best traction hobby 1/8 rc
1. ARRMA KRATON 6S BLX 4WD Electric RC RTR Remote Control Speed Truck with 2.4GHz Radio, Servo, Brushless ESC/Motor, 1:8 Scale, (Black/Green)
Feature
Kraton 6S is a rugged, ready to run 1/8 scale RC powerhouse, primed for multi-surface driving action, no matter how hard the elements fight backEngineered to excel on any terrain, thanks to blistering brushless power, waterproof electronics and boots Minokawa tires
Designed tough, with a 3mm thick anodized aluminum chassis, three full-metal geared differentials, beefy suspension components and steel driveshaft's
Designed fast, for high-speed RC asphalt runs, chucking dirt roosters at the local park, and flying across rocks and Rubble when the challenges become more extreme
Just supply two 2S or 3S 5000Mah LiPo packs and 4 AA batteries (all sold separately) for transmitter and you are ready to hit the roughest off-road Courses you can find
Description
Prime Performance.
The KRATON 6S is designed to be tough, so you can take your bashing to the
limits. It's engineered to excel on any terrain, thanks to blistering brushless
power, waterproof electronics and dBoots Minokawa tires. Go ahead. Take it
out on the roughest off-road courses you can find. The KRATON 6S will bounce
back for more, again and again.
BLX 2050Kv Brushless Motor
The BLX 2050Kv brushless motor provides a perfect balance of speed and
torque for use with the BLX185 ESC.
BLX185 150 Amp ESC
The BLX185 ESC is fitted with reliable XT90 connectors and a built-in cooling
fan for reduced heat during intense driving action. Other highlights include
over-voltage protection, 6S LiPo compatibility and a two-stage LiPo cut-off.
Tactic TTX300 2.4GHz SLT Radio System
The TTX300 radio system offers fast, consistent control. Featuring the
interference-free 2.4GHz SLT protocol, the radio's adjustable steering throttle
trim allows you to fine-tune control to suit your skill level.
dBoots Minokawa MT Tires
Aggressive, hard-wearing Minokawa MT all-terrain tires arrive mounted on
strong black nylon wheels for the hard-driving traction you need.
Waterproof Electronics
Fully waterproof electronics let you take your KRATON 6S through extreme
conditions.
Includes:
- Ready-To-Run KRATON 6S BLX Electric Speed Monster Truck
- Tactic TTX300 2.4GHz 3-channel radio
- Tactic TR326 2.4GHz 3-channel receiver
- BLX 4074 2050kV brushless motor
- Waterproof BLX185 brushless ESC
- Waterproof ADS-15M metal gear steering servo
- Adjustable oil-filled shocks with 4 mm shafts boost durability
- Shares the battery tray and receiver box with the OUTCAST 6S
- Stiffer servo mount
- Stronger bulkheads
- Stronger front and rear chassis braces
- Stronger front hubs
- Shock cap protectors
- High-downforce wing
- Heavy-duty drivetrain
- Durable steel driveshafts throughout
- Anodized aluminum chassis
- Black anodized aluminum shock towers
- Strong composite chassis side pods
- All-metal diff outdrives and gearbox internals
- Dirt shields and bumpers
- dBoots Minokawa multi-terrain tires
- Multi split-spoke wheels
- Two XT90 battery connectors
Requires:
- 2-3S 5000 mAh LiPo batteries with XT90 connectors (2)
- Charger
- AA Batteries
Vehicle Specifications:
- Length: 24 inches (590 millimeters)
- Width: 18.5 inches (470 millimeters)
- Height: 7.5 inches (195 millimeters)
- Wheelbase: 14.9 inches (378 millimeters)
- Ground Clearance: 1.3 inches (33 millimeters)
- Weight: 9.2 pounds (4.5 kilograms)
- Maximum Battery Tray Dimensions: 6.2 x 2.8 x 1.9 inches
(158 x 70 x 49 millimeters)
Body Specifications:
- Length: 18.6 inches (472 millimeters)
- Width
- (behind front wheels): 8 inches (203 millimeters)
- (at rear wheels): 10 inches (255 millimeters)
- Height: 6.3 inches (159 millimeters)
2. TMS RC Center Driveshaft for Traction Hobby Cragsman 1/8 Crawler
Feature
Traction Hobby Cragsman1/8 Crawler RC Cars Steel Main DriveshaftTraction Hobby Cragsman1/8
Traction Hobby Founder Offroad 4WD Crawle
Description
Traction Hobby Cragsman1/8 Scale and Trail Crawler RC Cars Steel Main Drive Shaft Upgrade Parts Condition: 100% Brand New and High Quality Material: Steel Suitable For: Traction Hobby Cragsman1/8 Crawler Item include: 1 pcs Steel Driveshaft 70 - 90 mm3. Duratrax Bandito 1:8 Scale RC Buggy Tires with Foam Inserts, C2 Soft Compound, Mounted on Black Wheels (Set of 2)
Feature
FEATURES: Fits front or rear of 1/8 4WD buggies Deep radial type tread Foam inserts Eight spoke wheels with 17mm hexINCLUDES: Two Bandito 1/8 scale C2 Buggy Tires Two Eight Spoke Buggy Wheels in Black, DTXC3814 One sheet of decals for identifying tires
SPECS: Diameter: 4.2 (107mm) Width: 1.8 (45mm) Hex Size: 17mm
COMMENTS: Duratrax C2 (soft) compound is comparable to Pro-Line M3 and AKA Soft ratings
Description
DuraTrax Performance Tires deliver top-end traction and construction tough enough to keep 'em on track and racking up laps long after your competition has limped to the pits.4. Exceed RC 1/8 Scale Mad Torque 8x8 Crawler 2.4ghz Ready to Run
Feature
Twin Waterproof Electronic Speed Controller (Note: ESC supports 6-7 cells Ni-MH battery only)True bead lock rock crawling wheels clamp onto aggressive rugged all terrain tires ensuring traction and grip in all types of terrain.
The Mad Torque 8x8 is ready for any adventure.
This system ensures interference free transmission to connect human to machine.
Description
The Mad Torque series of RC Trucks veered off normal and arrived at extreme. The new Mad Torque 8x8 is what they have created. This new Mad Torque is a ready to run 8x8 Crawler complete with multi link suspension, 4 solid axles, aluminum chassis, oil filled shocks, and locked differentials. Semi truck front cab with a dump truck rear end ensure the trucks ability to haul large payloads. Designed specifically for the tough demands of traversing gravel, sand, asphalt, snow, wood chips or rocks. Created for the customer who demands more wheels and power to the ground.The power system consists of twin brushed electronic speed controllers providing power to the four high torque 540 motors. A 7.2v 3300mah Ni-MH Battery delivers about 10 minutes of crawl time. Twin 9kg digital metal geared steering servos steer this beast in the direction you tell it to via an Exceed RC 2.4ghz radio system.
Features:
2.4GHz Radio Control
Four 540 High Performance Motor
7.2v 3300mAh Ni-MH Battery
Dual Front-wheel steering
Eight-wheel independent suspension
Fully sealed Ball Bearing set
Oil filled shocks
Multi link suspension design
True bead lock wheels and tires
Advanced Crawler tires tread pattern
Aluminum chassis construction
Specifications:
Length982MM
Width355MM
Height336MM
Wheelbase230CM
Tread360CM
Weight6.34KG
2.4G Radio
4x 540 Brushed motors
2x 20A ESC
2x 9KG Steering Servo
7.2v 3300mah Ni-MH Battery
Required to Run:
4 AA batteries required for the transmitter (Not Included).
5. Duratrax Lockup 1:8 Scale RC Buggy Tires with Foam Inserts, C2 Soft Compound, Unmounted (Set of 2)
Feature
FEATURES: Black rubber construction Knobby tread Two foam inserts Fits 1/8 scale front or rear wheelINCLUDES: Two rubber tread tires with inserts
REQUIRES: Wheels Tire glue, DTXR2000
Description
These are the Lockup Tires for 1/8 scale buggies from Duratrax FEATURES: Black rubber construction Knobby tread Two foam inserts Fits 1/8 scale front or rear wheel6. TMS RC Main Driveshaft for Traction Hobby Cragsman1/8 Crawler
Feature
Traction Hobby Cragsman1/8 Crawler RC Cars Steel Main DriveshaftTraction Hobby Cragsman1/8
Traction Hobby Founder Offroad 4WD Crawle
Description
Traction Hobby Cragsman1/8 Scale and Trail Crawler RC Cars Steel Main Drive Shaft Upgrade Parts Condition: 100% Brand New and High Quality Material: Steel Suitable For: Traction Hobby Cragsman 1/8 Crawler Item include: 1 pair Steel Driveshaft 131 - 149 mm7. Dilwe RC Chassis Skid Plate, Metal Front Middle Armor Guards Upgrade Part for Traction Hobby KM2 TH2 1/8 Car
Feature
Feature: Better protection for your chassis from rocks and other objects whilst crawling.Material: Top-quality metal enhances the overall performance of the RC car.
Unique Design: Superb craftsmanship, designed for lasting performance and long durability.
Application: Fit for TRACTION HOBBY KM2 TH2 1/8 RC car.
Preferred by knowledgable model hobbists & R/C enthusiasts.
Description
Features:1.Feature: Better protection for your chassis from rocks and other objects whilst crawling.
2.Material: Top-quality metal enhances the overall performance of the RC car.
3.Unique Design: Superb craftsmanship, designed for lasting performance and long durability.
4.Application: Fit for TRACTION HOBBY KM2 TH2 1/8 RC car.
5.Happy Customers ! - Dilwe continues to deliver the best user experience with innovative technology from a trusted brand. Please feel free to contact us if you have any request, we will solve your problem within 24 hours !
Specifications:
Material: Metal
Color: Shown As Pictures
Fit: for TRACTION HOBBY KM2 TH2 1/8 RC Car
Weight: 140g
Type: RC Model Part & Acces
Package List:
1 * Set of 4pcs Chassis Armor
Note:
The surface is slightly scratched and can be polished by sandpaper 1000.
8. Kyosho 1/8 Inferno MP9 TKI4 HIGH Traction Wing Stay Mount Stabilizer
Feature
Wing Stay Mount for the Kyosho 1/8 Inferno MP9 TKI4 10th Anniversary Special Edition (Model KYO33011B)This product is NEW in OEM Packaging and is from a New, Unused Kyosho 1/8 Inferno MP9 TKI4 10th Anniversary Special Edition (Model KYO33011B)
Due to disassembled nature of this product, some parts may show slight signs of disassembly.
The parts included with this product are exclusive to what is pictured. See product description for exact contents.
Part Number(s) associated with this product (see product description for inclusion details KYO33001B KYO33011B KYOIFW460B KYO1-S13015H KYO1-S33010H KYO1-S33012H KYO1-N3033N
Description
Kyosho 1/8 Inferno MP9 TKI4 10th Anniversary Special Edition (Model KYO33011B)Wing Stay Mount
MSRP: $18.99
This Product Includes:
High Traction Wing Stay Mount (Part # KYOIFW460B Partial)
Four (4) 3x15mm Button Head Hex Screws (Part # KYO1-S13015H Partial)
Four (4) 3x10mm Flat Head Hex Screws (Part # KYO1-S33010H Partial)
Two (2) 3x12mm Flat Head Hex Screws (Part # KYO1-S33012H Partial)
Two (2) 3mm Nylon Lock Nuts (Part # KYO1-N3033N Partial)
This product is NEW in OEM Packaging and is from a New, Unused Kyosho 1/8 Inferno MP9 TKI4 10th Anniversary Special Edition (Model KYO33011B)
Part Numbers are for Reference Only. The parts included with this product are exclusive to what is pictured in this listing.
This product is compatible with the following Model(s): Kyosho 1/8 Inferno MP9 TKI4 10th Anniversary Special Edition (Model KYO33011B), Inferno MP9 TKI4
9. Yosooo Front Middle Chassis Armor 4pcs Skid Plate Guards Upgrade Part for Traction Hobby KM2 TH2 1/8 Car
Feature
Fit for TRACTION HOBBY KM2 TH2 1/8 RC carTop-quality metal enhances the overall performance of the RC car
Superb craftsmanship, designed for lasting performance and long durability
Preferred by knowledgable model hobbists & R/C enthusiasts
Better protection for your chassis from rocks and other objects whilst crawling
Description
Specification:Material: Metal
Color: Shown As Pictures
Size: Approx.
Fit: for TRACTION HOBBY KM2 TH2 1/8 RC Car
Weight: 140g
Type: RC Model Part & Acces
Package List:
1 * Set of 4pcs Chassis Armor
Note:
The surface is slightly scratched and can be polished by sandpaper 1000.
10. PROLINE 9041034 Holeshot X4 Supersoft Off-Road 1/8 Buggy Tires Mounted On Lightweight Velocity Wheels, White
Feature
Unbelievable traction on a variety of surfacesRepresents the latest in race tire technology
Meticulous refinement over the OriginalHole Shot
Includes high density, durable, long lastingclosed cell inserts
Now Available in the X Series Compounds
Recent Comments